mirror of
https://github.com/meshtastic/meshtastic.git
synced 2024-09-20 16:17:33 -07:00
20 lines
1.5 KiB
Plaintext
20 lines
1.5 KiB
Plaintext
---
|
|
id: module-config
|
|
title: Module Configuration
|
|
sidebar_label: Module Config
|
|
slug: /settings/moduleconfig
|
|
sidebar_position: 3
|
|
---
|
|
|
|
Modules are included in the firmware and allow users to extend the functionality of their mesh or device.
|
|
|
|
| Name | Description |
|
|
|:----:|:-----------:|
|
|
| [Audio](/docs/settings/moduleconfig/audio) | enable Support for Codec2 Voice Comms on certain devices |
|
|
| [Canned Message](/docs/settings/moduleconfig/canned-message) | Set a number of predefined messages to send out directly from the device with the use of an input device like a rotary encoder. |
|
|
| [External Notification](/docs/settings/moduleconfig/external-notification) | Incoming messages are able to alert you using circuits you attach to the device (LEDs, Buzzers, etc) |
|
|
| [MQTT](/docs/settings/moduleconfig/mqtt) | Forward packets along to an MQTT server. This allows users on the local mesh to communicate with users on another mesh over the internet. |
|
|
| [Range Test](/docs/settings/moduleconfig/range-test) | Send messages with GPS location at an interval to test the distance your devices can communicate. Requires (at least) one device set up as a sender and one as a receiver. The receiver(s) will log all incoming messages to a CSV. |
|
|
| [Serial Module](/docs/settings/moduleconfig/serial) | Send messages across the mesh by sending strings over a serial port. |
|
|
| [Telemetry](/docs/settings/moduleconfig/telemetry) | Attach sensors to the device and transmit readings on a regular interval to the mesh. |
|