mirror of
https://github.com/meshtastic/meshtastic.git
synced 2024-11-11 08:04:26 -08:00
23 lines
1.4 KiB
Plaintext
23 lines
1.4 KiB
Plaintext
---
|
|
id: module-config
|
|
title: 1.3 Module Configuration
|
|
sidebar_label: 1.3 Module Config
|
|
sidebar_position: 2
|
|
---
|
|
|
|
Modules are included in the firmware and allow users to extend the functionality of their mesh or device.
|
|
|
|
| Name | Description |
|
|
|:----:|:-----------:|
|
|
| [Canned Message](canned-messages) | Set a number of predefined messages to send out directly from the device with the use of an input device like a rotary encoder. |
|
|
| [External Notification](external-notification) | Incoming messages are able to alert you using circuits you attach to the device (LEDs, Buzzers, etc) |
|
|
| [Input Broker](input-broker) | Attach and define input devices such as external keyboards and rotary encoders. |
|
|
| [Range Test](range-test-module) | Send messages with GPS location at an interval to test the distance your devices can communicate. Requires (at least) one device set up as a sender and one as a receiver. The receiver(s) will log all incoming messages to a CSV. |
|
|
| [Serial Module](serial) | Send messages across the mesh by sending strings over a serial port. |
|
|
| [Store and Forward](store-and-forward) | Set a designated node to store messages and resend them to nodes with intermittent connection to a mesh. |
|
|
| [Telemetry](telemetry) | Attach sensors to the device and transmit readings on a regular interval to the mesh. |
|
|
|
|
:::tip
|
|
Once module settings are changed, a **reset** is required for them to take effect.
|
|
:::
|