mirror of
https://github.com/meshtastic/meshtastic.git
synced 2024-12-31 16:37:32 -08:00
242 lines
6.3 KiB
Plaintext
242 lines
6.3 KiB
Plaintext
---
|
|
id: lora
|
|
title: LILYGO® TTGO Lora Devices
|
|
sidebar_label: LILYGO® Lora
|
|
sidebar_position: 4
|
|
---
|
|
|
|
import Tabs from "@theme/Tabs";
|
|
import TabItem from "@theme/TabItem";
|
|
|
|
Further information on the LILYGO® LoRa devices can be found on LILYGO®'s [GitHub page](https://github.com/Xinyuan-LilyGO/LilyGo-LoRa-Series).
|
|
|
|
<Tabs
|
|
groupId="t-lora"
|
|
defaultValue="v1"
|
|
values={[
|
|
{label: 'Lora V1', value: 'v1'},
|
|
{label: 'Lora V1.3', value: 'v1.3'},
|
|
{label: 'Lora V2.0', value: 'v2.0'},
|
|
{label: 'Lora V2.1-1.6', value:'v2.1'},
|
|
{label: 'Lora V2.1-1.8', value:'v2.1-1.8'},
|
|
{label: 'Lora T3S3-V1.0', value:'S3-v1'}
|
|
]}>
|
|
<TabItem value="v1">
|
|
|
|
:::warning
|
|
Not recommended with a battery! These boards contain the wrong component in the LiPo battery charging circuit allowing the battery to be overcharged.
|
|
:::
|
|
|
|
:::caution
|
|
This board is still in production but for various reasons not recommended for new purchases or for unattended installations. Firmware support is phased out. If in doubt, choose the Lora V2.1-1.6 or Lora T3S3 board.
|
|
:::
|
|
|
|
- **MCU**
|
|
- ESP32 (WiFi & Bluetooth)
|
|
- **LoRa Transceiver**
|
|
- Semtech SX1276
|
|
- **Frequency options**
|
|
- 915 MHz
|
|
- 868 MHz
|
|
- **Connectors**
|
|
- Micro USB
|
|
- Antenna: U.FL antenna connector
|
|
|
|
## Features
|
|
|
|
- Built in 0.96 inch OLED display
|
|
|
|
## Resources
|
|
|
|
- Firmware file: `firmware-tlora-v1-X.X.X.xxxxxxx.bin`
|
|
- Purchase link: [AliExpress](https://www.aliexpress.com/item/32996759721.html)
|
|
- US Distributor - Purchase link: [Rokland](https://store.rokland.com/products/lilygo-ttgo-lora32-v1-0-wireless-module-esp32-lora-915mhz-oled-0-96-inch-display-wifi-bluetooth-esp-32-antenna-ch9102-q184?ref=8Bb2mUO5i-jKwt)
|
|
|
|
|
|
|
|
</TabItem>
|
|
<TabItem value="v1.3">
|
|
|
|
:::warning
|
|
Not recommended with a battery! These boards contain the wrong component in the LiPo battery charging circuit allowing the battery to be overcharged.
|
|
:::
|
|
|
|
:::caution
|
|
This board is still in production but for various reasons not recommended for new purchases or for unattended installations. Firmware support is phased out. If in doubt, choose the Lora V2.1-1.6 or Lora T3S3 board.
|
|
:::
|
|
|
|
- **MCU**
|
|
- ESP32 (WiFi & Bluetooth)
|
|
- **LoRa Transceiver**
|
|
- Semtech SX127x
|
|
- **Frequency options**
|
|
- 915 MHz
|
|
- 868 MHz
|
|
- **Connectors**
|
|
- Micro USB
|
|
- Antenna: U.FL antenna connector
|
|
|
|
## Features
|
|
|
|
- Built in 0.96 inch OLED display
|
|
|
|
## Resources
|
|
|
|
- Firmware file: `firmware-tlora_v1_3-X.X.X.xxxxxxx.bin`
|
|
- Purchase link: [AliExpress](https://www.aliexpress.com/item/4000628100802.html)
|
|
|
|
|
|
|
|
|
|
</TabItem>
|
|
<TabItem value="v2.0">
|
|
|
|
:::warning
|
|
Not recommended with a battery! These boards contain the wrong component in the LiPo battery charging circuit allowing the battery to be overcharged.
|
|
:::
|
|
|
|
:::caution
|
|
This board is still in production but for various reasons not recommended for new purchases or for unattended installations. Firmware support is phased out. If in doubt, choose the Lora V2.1-1.6 or Lora T3S3 board.
|
|
:::
|
|
|
|
- **MCU**
|
|
- ESP32 (WiFi & Bluetooth)
|
|
- **LoRa Transceiver**
|
|
- Semtech SX127x
|
|
- **Frequency options**
|
|
- 433 MHz
|
|
- 868 MHz
|
|
- 915 MHz
|
|
- **Connectors**
|
|
- Micro USB
|
|
- Antenna: U.FL antenna connector
|
|
|
|
## Features
|
|
|
|
- Built in 0.96 inch OLED display
|
|
- Power and Reset switches
|
|
- microSD connector
|
|
- No GPS
|
|
|
|
## Resources
|
|
|
|
- Firmware file: `firmware-tlora-v2-X.X.X.xxxxxxx.bin`
|
|
- Purchase link: [AliExpress](https://www.aliexpress.com/item/32846302183.html)
|
|
|
|
|
|
|
|
</TabItem>
|
|
<TabItem value="v2.1">
|
|
|
|
:::caution
|
|
Early versions of some of these boards contained the wrong component in the LiPo battery charging circuit allowing the battery to be overcharged. Boards purchased after 2021 should be ok.
|
|
:::
|
|
|
|
- **MCU**
|
|
- ESP32 (WiFi & Bluetooth)
|
|
- **LoRa Transceiver**
|
|
- Semtech SX127x
|
|
- **Frequency options**
|
|
- 433 MHz
|
|
- 868 MHz
|
|
- 915 MHz
|
|
- **Connectors**
|
|
- Micro USB
|
|
- Antenna: SMA antenna connector
|
|
|
|
## Variations of identifying marks
|
|
|
|
- FCC ID: 2ASYE-T3-V1-6-1
|
|
- "T3_v1.6.1 20210104" on the board
|
|
- "Model T3 V1.6.1" on the FCC sticker
|
|
|
|
## Features
|
|
|
|
- Built in 0.96 inch OLED display
|
|
- Power and Reset switches
|
|
- microSD connector
|
|
- No GPS
|
|
|
|
## Resources
|
|
|
|
- Firmware file: `firmware-tlora-v2-1-1.6-X.X.X.xxxxxxx.bin`
|
|
- Purchase link: [AliExpress](https://www.aliexpress.com/item/32915894264.html)
|
|
- US Distributor - Purchase link: [Rokland](https://store.rokland.com/products/lilygo-ttgo-lora32-v2-1_1-6-version-915mhz-esp32-lora-oled-0-96-inch-sd-card-bluetooth-wifi-wireless-module-esp-32-sma-q211?ref=8Bb2mUO5i-jKwt)
|
|
|
|
|
|
|
|
</TabItem>
|
|
|
|
<TabItem value="v2.1-1.8">
|
|
|
|
- **MCU**
|
|
- ESP32 (WiFi & Bluetooth)
|
|
- **LoRa Transceiver**
|
|
- Semtech SX1280 (Region LORA_24 worldwide use)
|
|
- **Frequency options**
|
|
- 2.4 GHz
|
|
- **Connectors**
|
|
- USB-C
|
|
- Antenna: SMA antenna connector
|
|
|
|
## Features
|
|
|
|
- Built in 0.96 inch OLED display
|
|
- Power and Reset switches
|
|
- microSD connector
|
|
- No GPS
|
|
|
|
## Resources
|
|
|
|
- Firmware file: `firmware-tlora-v2-1-1.8-X.X.X.xxxxxxx.bin`
|
|
|
|
|
|
|
|
</TabItem>
|
|
|
|
<TabItem value="S3-v1">
|
|
|
|
- **MCU**
|
|
- ESP32-S3 (WiFi & Bluetooth)
|
|
- **LoRa Transceiver**
|
|
- Semtech SX1262
|
|
- Semtech 1276
|
|
- Semtech SX1280 with PA (Region LORA_24 worldwide use)
|
|
- **Frequency options**
|
|
- 868 MHz
|
|
- 915 MHz
|
|
- 2.4 GHz
|
|
- **Connectors**
|
|
- USB-C
|
|
- Antenna: SMA antenna connector
|
|
|
|
## Features
|
|
|
|
- Built in 0.96 inch OLED display
|
|
- Power and Reset switches, Boot / User Button
|
|
- microSD connector
|
|
- No GPS
|
|
|
|
## Flashing the T3S3
|
|
|
|
with antenna connected
|
|
|
|
- switch off the node
|
|
- connect the USB-C data cable => a blue LED goes on, display is black
|
|
- press the BOOT button - to the right of the display
|
|
- switch node on
|
|
- release BOOT button
|
|
|
|
this will put the node in flash mode. Now try flashing with the [Web Flasher](https://flasher.meshtastic.org/) with device "Tlora T3s3 V1"; if it finally says "Next" and the display stays dark with only the blue LED on, use the [CLI](https://meshtastic.org/docs/getting-started/flashing-firmware/esp32/cli-script) to flash Meshtasic to the node.
|
|
|
|
## Resources
|
|
|
|
- Firmware file: `firmware-tlora-t3s3-v1.xxxxxxx.bin`
|
|
- Purchase link: [AliExpress](https://www.aliexpress.com/item/1005004627139838.html)
|
|
|
|
|
|
|
|
</TabItem>
|
|
|
|
</Tabs>
|