mirror of
https://github.com/meshtastic/meshtastic.git
synced 2024-11-15 18:14:19 -08:00
60 lines
2.8 KiB
Plaintext
60 lines
2.8 KiB
Plaintext
---
|
|
id: drag-n-drop
|
|
title: Drag & Drop nRF52 & RP2040 Firmware Updates
|
|
sidebar_label: Drag & Drop (recommended)
|
|
sidebar_position: 1
|
|
---
|
|
|
|
import Tabs from "@theme/Tabs";
|
|
import TabItem from "@theme/TabItem";
|
|
import Link from "@docusaurus/Link";
|
|
|
|
## Flash Firmware
|
|
|
|
### nRF52
|
|
|
|
1. Download and unzip the latest firmware from [Meshtastic Downloads](https://meshtastic.org/downloads).
|
|
2. Connect your device to your computer with a USB data cable.
|
|
3. Double click the reset button on your device (this will put it into bootloader mode).
|
|
4. Notice a new drive will be mounted on your computer (Windows, Mac, or Linux).
|
|
5. Open this drive and you should see three files: `CURRENT.UF2`, `INDEX.HTM`, and `INFO_UF2.TXT`.
|
|
6. Copy the appropriate firmware file (`firmware-DEVICE_NAME-X.X.X-xxxxxxx.uf2`) from the release onto this drive.
|
|
7. Once the file has finished copying onto the drive, the device will reboot and install the Meshtastic firmware.
|
|
|
|
### RP2040
|
|
1. Download and unzip the latest firmware from [Meshtastic Downloads](https://meshtastic.org/downloads).
|
|
2. Press the BOOTSEL button and while keeping it pressed, connect the device to your computer via a USB cable.
|
|
3. Notice a new drive will be mounted on your computer (Windows, Mac, or Linux).
|
|
4. Open this drive and you should see two files: `INDEX.HTM` and `INFO_UF2.TXT`.
|
|
5. Copy the appropriate firmware file (`firmware-DEVICE_NAME-X.X.X-xxxxxxx.uf2`) from the release onto this drive.
|
|
6. Once the file has finished copying onto the drive, the device will reboot and install the Meshtastic firmware.
|
|
|
|
## Connect and Configure Device
|
|
|
|
After flashing the Meshtastic firmware to the device, you can proceed with the initial configuration.
|
|
|
|
<div className="indexCtasBody">
|
|
<Link
|
|
className={"button button--outline button--lg cta--button"}
|
|
to={"/docs/getting-started/initial-config"}
|
|
>
|
|
Connect and Configure Device
|
|
</Link>
|
|
</div>
|
|
|
|
### Potential Flashing Edge Cases
|
|
|
|
:::info
|
|
|
|
Before flashing confirm that you have [RAK4631](https://docs.rakwireless.com/Product-Categories/WisBlock/RAK4631/) and not a [RAK4631-R](https://docs.rakwireless.com/Product-Categories/WisBlock/RAK4631-R/) If this is not the case, fear not. The hardware is identical but requires changing the bootloader. Instructions on how to do this are located [here](/docs/getting-started/flashing-firmware/nrf52/convert-rak4631r).
|
|
|
|
:::
|
|
|
|
:::info
|
|
|
|
Previous versions of the Meshtastic firmware may save stale data, causing devices to get stuck in a crash loop during startup. If you experience issues when upgrading your nRF52 device from a previous version of Meshtastic, you may need to perform a full factory reset of the internal flash memory.
|
|
|
|
Follow the guide to [factory erase your nRF52](/docs/getting-started/flashing-firmware/nrf52/nrf52-erase) device before continuing to [flash firmware](#flash-firmware).
|
|
|
|
:::
|