mirror of
https://github.com/meshtastic/meshtastic.git
synced 2024-11-16 02:24:15 -08:00
55 lines
2.7 KiB
Plaintext
55 lines
2.7 KiB
Plaintext
---
|
|
id: nrf52-erase
|
|
title: Flash nRF52/RP2040 Factory Erase
|
|
sidebar_label: Factory Erase
|
|
sidebar_position: 3
|
|
description: Instructions for factory erasing an nRF52 or RP2040 device.
|
|
---
|
|
|
|
import Link from "@docusaurus/Link";
|
|
|
|
Meshtastic uses the [littlefs](https://github.com/littlefs-project/littlefs) library to store configuration, logs, and other data in the internal flash of nRF52 & RP2040 devices. Updating the firmware does _not_ erase this additional data, which can cause issues when the format and location of data changes between releases.
|
|
|
|
:::info
|
|
You may now use the [Meshtastic Web Flasher](https://flasher.meshtastic.org) to Factory Erase your nRF52 or RP2040-based devices. Visit the flasher, select your board, and click the trash can icon to the right of the Flash button. This will open a dialogue to begin the erase procedure.
|
|
|
|
Alternatively, follow the instructions below.
|
|
:::
|
|
|
|
### nRF52
|
|
|
|
To reset the flash storage on your nRF52 board:
|
|
|
|
1. Download and unzip the latest firmware from [Meshtastic Downloads](https://meshtastic.org/downloads).
|
|
2. Connect your device to your computer with a USB data cable.
|
|
3. Double click the reset button on your device (this will put it into bootloader mode)
|
|
4. Notice a new drive will be mounted on your computer (Windows, Mac, or Linux)
|
|
5. Open this drive and you should see three files: `CURRENT.UF2`, `INDEX.HTM`, and `INFO_UF2.TXT`
|
|
6. Find the file included in the downloaded firmware named `Meshtastic_nRF52_factory_erase.uf2` and copy it onto the new drive. The device should reboot.
|
|
7. With the [Meshtastic CLI](/docs/software/python/cli/) installed, open your Terminal/Console and enter the command: `meshtastic --noproto`.
|
|
8. Press any key, you should see the message: `Formatting... Done`.
|
|
|
|
Once the device has been erased, you can proceed to install the latest Meshtastic firmware on a clean storage filesystem by clicking the link below.
|
|
|
|
### RP2040
|
|
|
|
To reset the flash storage on your RP2040 board:
|
|
|
|
1. Download [flash_nuke.uf2](https://datasheets.raspberrypi.com/soft/flash_nuke.uf2) to your computer.
|
|
2. Press the BOOTSEL button and while keeping it pressed, connect it to your computer via a USB cable.
|
|
3. The board should now appear as a mass storage device on your computer with the label RPI-RP2.
|
|
4. Copy the flash_nuke.uf2 file to the device.
|
|
5. The board will now restart and the flash memory will be erased.
|
|
|
|
|
|
Once the device has been erased, you can proceed to install the latest Meshtastic firmware on a clean storage filesystem by clicking the link below.
|
|
|
|
<div className="indexCtasBody">
|
|
<Link
|
|
className={"button button--outline button--lg cta--button"}
|
|
to={"/docs/getting-started/flashing-firmware/nrf52/"}
|
|
>
|
|
Flash nRF52/RP2040 Firmware
|
|
</Link>
|
|
</div>
|