mirror of
https://github.com/meshtastic/meshtastic.git
synced 2024-12-28 06:59:45 -08:00
37 lines
2 KiB
Plaintext
37 lines
2 KiB
Plaintext
---
|
|
id: flashing-nrf52-devices
|
|
title: Flash NRF52 Devices
|
|
sidebar_label: NRF52 Device
|
|
sidebar_position: 2
|
|
---
|
|
|
|
## Flashing Methods for NRF52 Devices
|
|
|
|
The NRF52 based devices have the easiest firmware upgrade process. No driver or software install is required on any platform.
|
|
|
|
1. The [drag and drop](/docs/getting-started/flashing-firmware/nrf52/drag-n-drop) firmware installation is considered the "manual process" and recommended as the easiest solution.
|
|
2. The [Python Flasher](/docs/software/python/flasher) application does a lot under the hood to prevent you from needing to use the terminal. It also allows you to configure your device.
|
|
|
|
## Convert RAK4631-R to RAK4631
|
|
|
|
The only difference between the _RAK4631-R_ (RUI3) and the _RAK4631_ (Arduino) is the bootloader it is shipped with - the hardware is the same.
|
|
|
|
Meshtastic requires the Arduino bootloader on RAK WisBlock NRF52-based boards. The process of converting the bootloader only needs to be performed once.
|
|
|
|
This conversion requires the use of either a [DAPLink](https://daplink.io/) or [J-Link](https://www.segger.com/products/debug-probes/j-link/). The most reasonably priced and available is the [RAKDAP1](https://store.rakwireless.com/products/daplink-tool).
|
|
|
|
1. Install [Python](https://www.python.org/downloads/)
|
|
2. Install [pyOCD](https://pyocd.io/)
|
|
```shell
|
|
pip3 install pyocd
|
|
```
|
|
3. Download the required bootloader: [WisCore_RAK4631_Board_Bootloader.hex](https://github.com/RAKWireless/WisBlock/releases/download/0.4.2/WisCore_RAK4631_Board_Bootloader.hex)
|
|
4. Connect the RAKDAP as follows:
|
|
[<img src="/img/rak4631-rakdap1.png" style={{zoom:'25%'}} />](/img/rak4631-rakdap1.png)
|
|
5. Flash the bootloader
|
|
```shell
|
|
pyocd flash -t nrf52840 .\WisCore_RAK4631_Board_Bootloader.hex
|
|
```
|
|
6. Continue with the normal [flashing instructions](/docs/getting-started/flashing-firmware/nrf52/drag-n-drop)
|
|
|
|
Alternate methods of flashing are outlined [here](https://github.com/RAKWireless/WisBlock/tree/master/bootloader/RAK4630). |