mirror of
https://github.com/meshtastic/meshtastic.git
synced 2024-11-16 02:24:15 -08:00
148 lines
4.2 KiB
Plaintext
148 lines
4.2 KiB
Plaintext
---
|
|
id: detection-sensor
|
|
title: Detection Sensor Module Usage
|
|
sidebar_label: Detection Sensor
|
|
description: Configuration details for the Detection Sensor Module of your Meshtastic device. Used for motion, reed, and other open/closed gate systems.
|
|
---
|
|
|
|
import Tabs from "@theme/Tabs";
|
|
import TabItem from "@theme/TabItem";
|
|
|
|
The Detection Sensor module allows you to configure a GPIO pin to be monitored for a specified high/low status and send text alerts over the Detection Sensor portnum when an event is detected. This is particularly useful for motion detection sensors, reed switches, and other open / closed state systems in which notifications over the mesh are desired. Config options are: Enabled, Minimum Broadcast Interval, State Broadcast Interval, Send Bell, Name, Monitor Pin, Detection Triggered High, and Use Pull-up.
|
|
|
|
In order to use this module, make sure your devices have firmware version 2.2.2 or higher.
|
|
|
|
## Detection Sensor Module Config Values
|
|
|
|
### Enabled
|
|
|
|
Whether the Module is enabled.
|
|
|
|
### Minimum Broadcast Interval
|
|
|
|
The interval in seconds of how often we can send a message to the mesh when a state change is detected.
|
|
|
|
### State Broadcast Interval
|
|
|
|
The interval in seconds of how often we should send a message to the mesh with the current state regardless of changes, When set to 0, only state changes will be broadcasted, Works as a sort of status heartbeat for peace of mind.
|
|
|
|
### Send Bell
|
|
|
|
Send ASCII bell with alert message. Useful for triggering ext. notification on bell
|
|
name.
|
|
|
|
### Friendly Name
|
|
|
|
Used to format the message sent to mesh. Example: A name "Motion" would result in a message "Motion detected". Maximum length of 20 characters.
|
|
|
|
### Monitor Pin
|
|
|
|
The GPIO pin to monitor for state changes.
|
|
|
|
### Detection Triggered High
|
|
|
|
Whether or not the GPIO pin state detection is triggered on HIGH (1), otherwise LOW (0).
|
|
|
|
### Use Pull-up
|
|
|
|
Whether or not use INPUT_PULLUP mode for GPIO pin. Only applicable if the board uses pull-up resistors on the pin.
|
|
|
|
## Detection Sensor Module Client Availability
|
|
|
|
<Tabs
|
|
groupId="settings"
|
|
defaultValue="cli"
|
|
values={[
|
|
{label: 'Android', value: 'android'},
|
|
{label: 'Apple', value: 'apple'},
|
|
{label: 'CLI', value: 'cli'},
|
|
{label: 'Web', value: 'web'},
|
|
]}>
|
|
<TabItem value="android">
|
|
|
|
#### Android
|
|
|
|
|
|
:::info
|
|
All Detection Sensor Module config options are available for Android in app version 2.2.2 and higher.
|
|
|
|
1. Open the Meshtastic App
|
|
2. Navigate to: **Vertical Ellipsis (3 dots top right) > Radio Configuration > Detection Sensor**
|
|
:::
|
|
|
|
</TabItem>
|
|
<TabItem value="apple">
|
|
|
|
#### Apple
|
|
|
|
:::info
|
|
All Detection Sensor Module config options are available on iOS, iPadOS and macOS app versions 2.2.2 and higher at Settings > Module Configuration > Detection Sensor
|
|
:::
|
|
|
|
</TabItem>
|
|
<TabItem value="cli">
|
|
|
|
#### CLI
|
|
|
|
:::info
|
|
|
|
All Detection Sensor Module config options are available in the python CLI version 2.2.2 and higher.
|
|
|
|
:::
|
|
|
|
Example commands are below:
|
|
|
|
```shell title="Enable/Disable the Detection Sensor Module"
|
|
meshtastic --set detection_sensor.enabled true
|
|
meshtastic --set detection_sensor.enabled false
|
|
```
|
|
|
|
```shell title="Set the Minimum Broadcast Interval to 90 seconds"
|
|
meshtastic --set detection_sensor.minimum_broadcast_secs 90
|
|
```
|
|
|
|
```shell title="Set the State Broadcast Interval to 5 minutes"
|
|
meshtastic --set detection_sensor.state_broadcast_secs 300
|
|
```
|
|
|
|
```shell title="Enable/Disable Send Bell"
|
|
meshtastic --set detection_sensor.send_bell true
|
|
meshtastic --set detection_sensor.send_bell false
|
|
```
|
|
|
|
```shell title="Set the friendly name to 'motion'"
|
|
meshtastic --set detection_sensor.name "motion"
|
|
```
|
|
|
|
```shell title="Set the Monitor Pin to 7"
|
|
meshtastic --set detection_sensor.monitor_pin 7
|
|
```
|
|
|
|
```shell title="Enable Notifications when the Monitor Pin goes HIGH"
|
|
meshtastic --set detection_sensor.detection_triggered_high true
|
|
```
|
|
|
|
```shell title="Enable Notifications when the Monitor Pin goes LOW"
|
|
meshtastic --set detection_sensor.detection_triggered_high false
|
|
```
|
|
|
|
```shell title="Enable the use INPUT_PULLUP mode"
|
|
meshtastic --set detection_sensor.use_pullup true
|
|
```
|
|
|
|
```shell title="Get the Detection Sensor Module Configuration"
|
|
meshtastic --get detection_sensor
|
|
```
|
|
</TabItem>
|
|
<TabItem value="web">
|
|
|
|
#### Web
|
|
|
|
:::info
|
|
|
|
All Detection Sensor module config options are available in the Web UI.
|
|
|
|
:::
|
|
</TabItem>
|
|
</Tabs>
|