mirror of
https://github.com/meshtastic/meshtastic.git
synced 2024-11-16 10:34:14 -08:00
50 lines
2.4 KiB
Plaintext
50 lines
2.4 KiB
Plaintext
---
|
|
id: convert-rak4631r
|
|
title: Convert RAK4631-R to RAK4631
|
|
sidebar_label: Convert RAK4631-R
|
|
sidebar_position: 4
|
|
description: Instructions for converting the RAK4631-R to RAK-4631 using Python and adafruit-nrfutil.
|
|
---
|
|
|
|
The only difference between the _RAK4631-R_ (RUI3) and the _RAK4631_ (Arduino) is the bootloader it is shipped with - the hardware is the same.
|
|
|
|
Meshtastic requires the Arduino bootloader on RAK WisBlock nRF52-based boards. The process of converting the bootloader only needs to be performed once.
|
|
|
|
Here are two ways to flash the bootloader:
|
|
|
|
## USB Device Firmware Upgrade (DFU)
|
|
|
|
1. Install [Python](https://www.python.org/downloads/)
|
|
2. Install [adafruit-nrfutil](https://github.com/adafruit/Adafruit_nRF52_nrfutil)
|
|
```shell
|
|
pip3 install adafruit-nrfutil
|
|
```
|
|
3. Download the required bootloader: [WisCore_RAK4631_Board_Bootloader.zip](https://github.com/RAKWireless/WisBlock/releases/download/0.4.2/WisCore_RAK4631_Board_Bootloader.zip)
|
|
4. Connect your RAK device by USB.
|
|
5. Flash the bootloader
|
|
```shell
|
|
adafruit-nrfutil --verbose dfu serial --package ./WisCore_RAK4631_Board_Bootloader.zip -p /dev/ttyACM0 -b 115200 --singlebank --touch 1200
|
|
```
|
|
Note: The serial port name (`/dev/ttyACM0`) may differ depending on your operating system. Make sure to identify the correct port name for your setup.
|
|
6. Continue with the normal [flashing instructions](/docs/getting-started/flashing-firmware/nrf52/drag-n-drop)
|
|
|
|
## Debugger
|
|
|
|
This conversion requires the use of either a [DAPLink](https://daplink.io/) or [J-Link](https://www.segger.com/products/debug-probes/j-link/). The most reasonably priced and available is the [RAKDAP1](https://store.rakwireless.com/products/daplink-tool).
|
|
|
|
1. Install [Python](https://www.python.org/downloads/)
|
|
2. Install [pyOCD](https://pyocd.io/)
|
|
```shell
|
|
pip3 install pyocd
|
|
```
|
|
3. Download the required bootloader: [WisCore_RAK4631_Board_Bootloader.hex](https://github.com/RAKWireless/WisBlock/releases/download/0.4.2/WisCore_RAK4631_Board_Bootloader.hex)
|
|
4. Connect the RAKDAP as follows:
|
|
[<img src="/img/rak4631-rakdap1.webp" style={{zoom:'25%'}} />](/img/rak4631-rakdap1.webp)
|
|
5. Flash the bootloader
|
|
```shell
|
|
pyocd flash -t nrf52840 .\WisCore_RAK4631_Board_Bootloader.hex
|
|
```
|
|
6. Continue with the normal [flashing instructions](/docs/getting-started/flashing-firmware/nrf52/drag-n-drop)
|
|
|
|
Alternate methods of flashing are outlined [here](https://github.com/RAKWireless/WisBlock/tree/master/bootloader/RAK4630).
|