mirror of
https://github.com/meshtastic/meshtastic.git
synced 2024-12-28 06:59:45 -08:00
126 lines
7.1 KiB
Plaintext
126 lines
7.1 KiB
Plaintext
---
|
||
id: radio-settings
|
||
title: Radio Settings
|
||
slug: /overview/radio-settings
|
||
sidebar_label: Radio Settings
|
||
sidebar_position: 1
|
||
---
|
||
|
||
:::info
|
||
Meshtastic is **not** LoRaWAN, Helium or TTN (TheThingsNetwork). Meshtastic uses the full spectrum frequency range designated to LoRa technology per region. This allows for several hundred possible frequency channels in the US region alone.
|
||
:::
|
||
|
||
:::info
|
||
Power limits will generally be lifted in the software if `is_licensed` is set to `true`. See [HAM Mode](/docs/faq#amateur-radio-ham) for more information.
|
||
:::
|
||
|
||
## Europe Frequency Bands
|
||
|
||
### 433 MHz
|
||
|
||
The maximum power allowed for Europe is +14 dBm ERP ([Effective Radiated Power](https://en.wikipedia.org/wiki/Effective_radiated_power)).
|
||
|
||
The band range is from 433 to 434 MHz.
|
||
|
||
There are four channels defined with the standard radio preset `LongFast`. After factory reset the radio will be set to channel 3 with a center frequency of 433.875 MHz.
|
||
|
||
### 868 MHz
|
||
|
||
The maximum power allowed for Europe is +27 dBm ERP ([Effective Radiated Power](https://en.wikipedia.org/wiki/Effective_radiated_power)).
|
||
|
||
The band range is from 869.40 to 869.65 MHz. This is less than the 863–870 MHz range defined as SRD Band, but allows for a higher ERP and a duty cycle of 10%.
|
||
|
||
There is one channel defined with the standard radio preset `LongFast`. After factory reset the radio will be set to channel 0 with a center frequency of 869.525 MHz.
|
||
|
||
## North America Frequency Bands
|
||
|
||
### 915 MHz (ISM Band)
|
||
|
||
The maximum output power for North America is +30 dBm ERP ([Effective Radiated Power](https://en.wikipedia.org/wiki/Effective_radiated_power)).
|
||
|
||
The band range is from 902 to 928 MHz.
|
||
|
||
There are 104 channels defined with the standard radio preset `LongFast`. After factory reset the radio will be set to channel 19 with a center frequency of 906.875 MHz.
|
||
|
||
## Data Rates
|
||
|
||
### Considerations
|
||
|
||
Various data-rate options are available when configuring a channel and are inversely proportional to the theoretical range of the devices.
|
||
|
||
- **Spreading Factor** - How much we "spread" our data over time.
|
||
- Each step up in Spreading Factor doubles the airtime to transmit.
|
||
- Each step up in Spreading Factor adds about 2.5db extra link budget.
|
||
- **Bandwidth** - How big of a slice of the spectrum we use.
|
||
- Each doubling of the bandwidth is almost 3db less link budget.
|
||
- Bandwidths less than 31 may be unstable unless you have a high quality Crystal Oscillator.
|
||
- **Coding Rate** - How much redundancy we encode to resist noise.
|
||
- Increasing coding rate increases reliability while decreasing data-rate.
|
||
- 4/5 - 1.25x overhead
|
||
- 4/6 - 1.5x overhead
|
||
- 4/7 - 1.75x overhead
|
||
- 4/8 - 2x overhead
|
||
|
||
### Predefined Channels
|
||
|
||
We have six predefined channels. These are the most common settings and have been proven to work well:
|
||
|
||
| Channel setting | Alt Channel Name | Data-Rate | SF / Symbols | Coding Rate | Bandwidth | Link Budget |
|
||
| :------------------: | :---------------: | :------------------: | :-----------: | :----------: | :--------:| :---------- :|
|
||
| Short Range / Fast | Short Fast | 6.8 kbps | 7 / 128 | 4/8 | 250 | 137dB |
|
||
| Short Range / Slow | Short Slow | 3.9 kbps | 8 / 256 | 4/8 | 250 | 140dB |
|
||
| Medium Range / Fast | Medium Fast | 2.2 kbps | 9 / 512 | 4/8 | 250 | 143dB |
|
||
| Medium Range / Slow | Medium Slow | 1.2 kbps | 10 / 1024 | 4/8 | 250 | 146dB |
|
||
| Long Range / Fast | Long Fast | 0.67 kbps (default) | 11 / 2048 | 4/8 | 250 | 148.5dB |
|
||
| Long Range / Slow | Long Slow | 0.18 kbps | 12 / 4096 | 4/8 | 125 | 154dB |
|
||
| Very Long Range - Slow | Very Long Slow | 0.05 kbps | 12 / 4096 | 4/8 | 31.25 | 160.1dB |
|
||
|
||
|
||
:::note
|
||
The link budget used by these calculations assumes a transmit power of 17dBm and an antenna with 0dB gain. Adjust your link budget assumptions based on your actual devices. Data-rate in this table is actual measured but doesn't count mesh overhead, hops and re-transmissions.
|
||
:::
|
||
|
||
### Custom Settings
|
||
|
||
You may want to select other channels for your usage. The other settings can be set by using the Python API.
|
||
|
||
```shell
|
||
meshtastic --ch-set spread_factor 10 --ch-set coding_rate 4 --ch-set bandwidth 125 --ch-index 0
|
||
```
|
||
|
||
After applying the settings, you will need to restart the device. After your device is restarted, it will generate a new crypto key and you will need to share the newly generated QR Code or URL to all your other devices.
|
||
|
||
Some example settings:
|
||
|
||
| Data-rate | SF / Symbols | Coding Rate | Bandwidth | Link Budget | Note |
|
||
| :---------:| :-----------:| :----------:| :--------:| :----------:| :----------------------------------------------------------------------- |
|
||
| 37.50 kbps | 6 / 64 | 4/5 | 500 | 129dB | Fastest possible speed |
|
||
| 3.125 kbps | 8 / 256 | 4/5 | 125 | 143dB | |
|
||
| 1.953 kbps | 8 / 256 | 4/8 | 125 | 143dB | |
|
||
| 1.343 kbps | 11 / 2048 | 4/8 | 500 | 145dB | |
|
||
| 1.099 kbps | 9 / 512 | 4/8 | 125 | 146dB | |
|
||
| 0.814 kbps | 10 / 1024 | 4/6 | 125 | 149dB | |
|
||
| 0.610 kbps | 10 / 1024 | 4/8 | 125 | 149dB | |
|
||
| 0.488 kbps | 11 / 2048 | 4/6 | 125 | 152dB | |
|
||
| 0.336 kbps | 11 / 2048 | 4/8 | 125 | 152dB | |
|
||
| 0.073 kbps | 12 / 4096 | 4/5 | 31 | 160dB | Twice the range and/or coverage of "Long Slow", low resilience to noise |
|
||
| 0.046 kbps | 12 / 4096 | 4/8 | 31 | 160dB | Twice the range and/or coverage of "Long Slow", high resilience to noise |
|
||
|
||
The link budget used by these calculations assumes a transmit power of 17dBm and an antenna with 0dB gain. Adjust your link budget assumptions based on your actual devices.
|
||
|
||
These channel settings may have not been tested. Use at your own discretion. Share on <https://meshtastic.discourse.group> with your successes or failure.
|
||
|
||
## Cryptography
|
||
|
||
The pre-shared key (PSK) used by the devices can be modified.
|
||
|
||
- 0 = No crypto
|
||
- 1 = Default channel key
|
||
- 2 - 10 = The default channel key, except with 1 through 9 added to the last byte
|
||
|
||
Use of cryptography can also be modified. To disable cryptography (maybe useful if you have Ham radio license):
|
||
|
||
```shell
|
||
meshtastic --setchan psk 0
|
||
```
|