https://linear.app/n8n/issue/PAY-985
```
PATCH /users/:id/role
unauthenticated user
✓ should receive 401 (349 ms)
member
✓ should fail to demote owner to member (349 ms)
✓ should fail to demote owner to admin (359 ms)
✓ should fail to demote admin to member (381 ms)
✓ should fail to promote other member to owner (353 ms)
✓ should fail to promote other member to admin (377 ms)
✓ should fail to promote self to admin (354 ms)
✓ should fail to promote self to owner (371 ms)
admin
✓ should receive 400 on invalid payload (351 ms)
✓ should receive 404 on unknown target user (351 ms)
✓ should fail to demote owner to admin (349 ms)
✓ should fail to demote owner to member (347 ms)
✓ should fail to promote member to owner (384 ms)
✓ should fail to promote admin to owner (350 ms)
✓ should be able to demote admin to member (354 ms)
✓ should be able to demote self to member (350 ms)
✓ should be able to promote member to admin (349 ms)
owner
✓ should be able to promote member to admin (349 ms)
✓ should be able to demote admin to member (349 ms)
✓ should fail to demote self to admin (348 ms)
✓ should fail to demote self to member (354 ms)
```
Followup to #7566 | Story: https://linear.app/n8n/issue/PAY-926
### Manual workflow activation and deactivation
In a multi-main scenario, if the user manually activates or deactivates
a workflow, the process (whether leader or follower) that handles the
PATCH request and updates its internal state should send a message into
the command channel, so that all other main processes update their
internal state accordingly:
- Add to `ActiveWorkflows` if activating
- Remove from `ActiveWorkflows` if deactivating
- Remove and re-add to `ActiveWorkflows` if the update did not change
activation status.
After updating their internal state, if activating or deactivating, the
recipient main processes should push a message to all connected
frontends so that these can update their stores and so reflect the value
in the UI.
### Workflow activation errors
On failure to activate a workflow, the main instance should record the
error in Redis - main instances should always pull activation errors
from Redis in a multi-main scenario.
### Leadership change
On leadership change...
- The old leader should stop pruning and the new leader should start
pruning.
- The old leader should remove trigger- and poller-based workflows and
the new leader should add them.
This PR:
- Creates `InvitationController`
- Moves `POST /users` to `POST /invitations` and move related test to
`invitations.api.tests`
- Moves `POST /users/:id` to `POST /invitations/:id/accept` and move
related test to `invitations.api.tests`
- Adjusts FE to use new endpoints
- Moves all the invitation logic to the `UserService`
---------
Co-authored-by: कारतोफ्फेलस्क्रिप्ट™ <aditya@netroy.in>
Story: https://linear.app/n8n/issue/PAY-926
This PR coordinates workflow activation on instance startup and on
leadership change in multiple main scenario in the internal API. Part 3
on manual workflow activation and deactivation will be a separate PR.
### Part 1: Instance startup
In multi-main scenario, on starting an instance...
- [x] If the instance is the leader, it should add webhooks, triggers
and pollers.
- [x] If the instance is the follower, it should not add webhooks,
triggers or pollers.
- [x] Unit tests.
### Part 2: Leadership change
In multi-main scenario, if the main instance leader dies…
- [x] The new main instance leader must activate all trigger- and
poller-based workflows, excluding webhook-based workflows.
- [x] The old main instance leader must deactivate all trigger- and
poller-based workflows, excluding webhook-based workflows.
- [x] Unit tests.
To test, start two instances and check behavior on startup and
leadership change:
```
EXECUTIONS_MODE=queue N8N_LEADER_SELECTION_ENABLED=true N8N_LICENSE_TENANT_ID=... N8N_LICENSE_ACTIVATION_KEY=... N8N_LOG_LEVEL=debug npm run start
EXECUTIONS_MODE=queue N8N_LEADER_SELECTION_ENABLED=true N8N_LICENSE_TENANT_ID=... N8N_LICENSE_ACTIVATION_KEY=... N8N_LOG_LEVEL=debug N8N_PORT=5679 npm run start
```
Due to a change, during the credentials import command, the core's
Credential object is being called through its prototype. This caused the
Credential's cipher variable to not be set, thus no cipher service being
available during import. This fix catches this edge case and provides a
fix.
This change ensures that things like `encryptionKey` and `instanceId`
are always available directly where they are needed, instead of passing
them around throughout the code.
This fixes a bug in the pruning (soft-delete). The pruning was a bit too
aggressive, as it also pruned executions that weren't in an end state
yet. This only becomes an issue if there are long-running executions
(e.g. workflow with Wait node) or the prune parameters are set to keep
only a tiny number of executions.
Depends on: #7092 | Story:
[PAY-768](https://linear.app/n8n/issue/PAY-768)
This PR:
- Generalizes the `IBinaryDataManager` interface.
- Adjusts `Filesystem.ts` to satisfy the interface.
- Sets up an S3 client stub to be filled in in the next PR.
- Turns `BinaryDataManager` into an injectable service.
- Adjusts the config schema and adds new validators.
Note that the PR looks large but all the main changes are in
`packages/core/src/binaryData`.
Out of scope:
- `BinaryDataManager` (now `BinaryDataService`) and `Filesystem.ts` (now
`fs.client.ts`) were slightly refactored for maintainability, but fully
overhauling them is **not** the focus of this PR, which is meant to
clear the way for the S3 implementation. Future improvements for these
two should include setting up a backwards-compatible dir structure that
makes it easier to locate binary data files to delete, removing
duplication, simplifying cloning methods, using integers for binary data
size instead of `prettyBytes()`, writing tests for existing binary data
logic, etc.
---------
Co-authored-by: कारतोफ्फेलस्क्रिप्ट™ <aditya@netroy.in>
Based on #7065 | Story: https://linear.app/n8n/issue/PAY-771
n8n on filesystem mode marks binary data to delete on manual execution
deletion, on unsaved execution completion, and on every execution
pruning cycle. We later prune binary data in a separate cycle via these
marker files, based on the configured TTL. In the context of introducing
an S3 client to manage binary data, the filesystem mode's mark-and-prune
setup is too tightly coupled to the general binary data management
client interface.
This PR...
- Ensures the deletion of an execution causes the deletion of any binary
data associated to it. This does away with the need for binary data TTL
and simplifies the filesystem mode's mark-and-prune setup.
- Refactors all execution deletions (including pruning) to cause soft
deletions, hard-deletes soft-deleted executions based on the existing
pruning config, and adjusts execution endpoints to filter out
soft-deleted executions. This reduces DB load, and keeps binary data
around long enough for users to access it when building workflows with
unsaved executions.
- Moves all execution pruning work from an execution lifecycle hook to
`execution.repository.ts`. This keeps related logic in a single place.
- Removes all marking logic from the binary data manager. This
simplifies the interface that the S3 client will meet.
- Adds basic sanity-check tests to pruning logic and execution deletion.
Out of scope:
- Improving existing pruning logic.
- Improving existing execution repository logic.
- Adjusting dir structure for filesystem mode.
---------
Co-authored-by: कारतोफ्फेलस्क्रिप्ट™ <aditya@netroy.in>
In scope:
- Consolidate `WorkflowService.getMany()`.
- Support non-entity field `ownedBy` for `select`.
- Support `tags` for `filter`.
- Move `addOwnerId` to `OwnershipService`.
- Remove unneeded check for `filter.id`.
- Simplify DTO validation for `filter` and `select`.
- Expand tests for `GET /workflows`.
Workflow list query DTOs:
```
filter → name, active, tags
select → id, name, active, tags, createdAt, updatedAt, versionId, ownedBy
```
Out of scope:
- Migrate `shared_workflow.roleId` and `shared_credential.roleId` to
string IDs.
- Refactor `WorkflowHelpers.getSharedWorkflowIds()`.
Changes in https://github.com/n8n-io/n8n/pull/6394 removed xml body parsing for all non-webhook routes. This broken SAML endpoints as they need the XML body parser to function correctly.
* support redis cluster
* cleanup, fix config schema
* set default prefix to bull
* initial commit
* improve logging
* improve types and refactor
* list support and refactor
* fix redis service and tests
* add comment
* add redis and cache prefix
* use injection
* lint fix
* clean schema comments
* improve naming, tests, cluster client
* merge master
* cache returns unknown instead of T
* update cache service, tests and doc
* remove console.log
* VariablesService as DI, add caching, fix tests
* do not cache null or undefined values
* import fix
* more DI and remove collections
* fix merge
* lint fix
* rename to ~Cached
* fix test for CI
* fix ActiveWorkflowRunner test
Also,
1. Consistent CORS support ~on all three webhook types~ waiting webhooks never supported CORS. I'll fix that in another PR
2. [Fixes binary-data handling when request body is text, json, or xml](https://linear.app/n8n/issue/NODE-505/webhook-binary-data-handling-fails-for-textplain-files).
3. Reduced number of middleware that each request has to go through.
4. Removed the need to maintain webhook endpoints in the auth-exception list.
5. Skip all middlewares (apart from `compression`) on Webhook routes.
6. move `multipart/form-data` support out of individual nodes
7. upgrade `formidable`
8. fix the filenames on binary-data in webhooks nodes
9. add unit tests and integration tests for webhook request handling, and increase test coverage
* db entities don't need an ID before they are inserted
* don't define constructors on entity classes, use repository.create instead
* use mixins to reduce duplicate code in db entity classes
