Due to a change, during the credentials import command, the core's
Credential object is being called through its prototype. This caused the
Credential's cipher variable to not be set, thus no cipher service being
available during import. This fix catches this edge case and provides a
fix.
all commands sent between main instance and workers need to contain a
server id to prevent senders from reacting to their own messages,
causing loops
this PR makes sure all sent messages contain a sender id by default as
part of constructing a sending redis client.
---------
Co-authored-by: कारतोफ्फेलस्क्रिप्ट™ <aditya@netroy.in>
Depends on: #7092 | Story:
[PAY-768](https://linear.app/n8n/issue/PAY-768)
This PR:
- Generalizes the `IBinaryDataManager` interface.
- Adjusts `Filesystem.ts` to satisfy the interface.
- Sets up an S3 client stub to be filled in in the next PR.
- Turns `BinaryDataManager` into an injectable service.
- Adjusts the config schema and adds new validators.
Note that the PR looks large but all the main changes are in
`packages/core/src/binaryData`.
Out of scope:
- `BinaryDataManager` (now `BinaryDataService`) and `Filesystem.ts` (now
`fs.client.ts`) were slightly refactored for maintainability, but fully
overhauling them is **not** the focus of this PR, which is meant to
clear the way for the S3 implementation. Future improvements for these
two should include setting up a backwards-compatible dir structure that
makes it easier to locate binary data files to delete, removing
duplication, simplifying cloning methods, using integers for binary data
size instead of `prettyBytes()`, writing tests for existing binary data
logic, etc.
---------
Co-authored-by: कारतोफ्फेलस्क्रिप्ट™ <aditya@netroy.in>
Based on #7065 | Story: https://linear.app/n8n/issue/PAY-771
n8n on filesystem mode marks binary data to delete on manual execution
deletion, on unsaved execution completion, and on every execution
pruning cycle. We later prune binary data in a separate cycle via these
marker files, based on the configured TTL. In the context of introducing
an S3 client to manage binary data, the filesystem mode's mark-and-prune
setup is too tightly coupled to the general binary data management
client interface.
This PR...
- Ensures the deletion of an execution causes the deletion of any binary
data associated to it. This does away with the need for binary data TTL
and simplifies the filesystem mode's mark-and-prune setup.
- Refactors all execution deletions (including pruning) to cause soft
deletions, hard-deletes soft-deleted executions based on the existing
pruning config, and adjusts execution endpoints to filter out
soft-deleted executions. This reduces DB load, and keeps binary data
around long enough for users to access it when building workflows with
unsaved executions.
- Moves all execution pruning work from an execution lifecycle hook to
`execution.repository.ts`. This keeps related logic in a single place.
- Removes all marking logic from the binary data manager. This
simplifies the interface that the S3 client will meet.
- Adds basic sanity-check tests to pruning logic and execution deletion.
Out of scope:
- Improving existing pruning logic.
- Improving existing execution repository logic.
- Adjusting dir structure for filesystem mode.
---------
Co-authored-by: कारतोफ्फेलस्क्रिप्ट™ <aditya@netroy.in>
This PR adds new endpoints to the REST API:
`/orchestration/worker/status` and `/orchestration/worker/id`
Currently these just trigger the return of status / ids from the workers
via the redis back channel, this still needs to be handled and passed
through to the frontend.
It also adds the eventbus to each worker, and triggers a reload of those
eventbus instances when the configuration changes on the main instances.
* first commit for postgres migration
* (not working)
* sqlite migration
* quicksave
* fix tests
* fix pg test
* fix postgres
* fix variables import
* fix execution saving
* add user settings fix
* change migration to single lines
* patch preferences endpoint
* cleanup
* improve variable import
* cleanup unusued code
* Update packages/cli/src/PublicApi/v1/handlers/workflows/workflows.handler.ts
Co-authored-by: Omar Ajoue <krynble@gmail.com>
* address review notes
* fix var update/import
* refactor: Separate execution data to its own table (#6323)
* wip: Temporary migration process
* refactor: Create boilerplate repository methods for executions
* fix: Lint issues
* refactor: Added search endpoint to repository
* refactor: Make the execution list work again
* wip: Updating how we create and update executions everywhere
* fix: Lint issues and remove most of the direct access to execution model
* refactor: Remove includeWorkflowData flag and fix more tests
* fix: Lint issues
* fix: Fixed ordering of executions for FE, removed transaction when saving execution and removed unnecessary update
* refactor: Add comment about missing feature
* refactor: Refactor counting executions
* refactor: Add migration for other dbms and fix issues found
* refactor: Fix lint issues
* refactor: Remove unnecessary comment and auto inject repo to internal hooks
* refactor: remove type assertion
* fix: Fix broken tests
* fix: Remove unnecessary import
* Remove unnecessary toString() call
Co-authored-by: Iván Ovejero <ivov.src@gmail.com>
* fix: Address comments after review
* refactor: Remove unused import
* fix: Lint issues
* fix: Add correct migration files
---------
Co-authored-by: Iván Ovejero <ivov.src@gmail.com>
* remove null values from credential export
* fix: Fix an issue with queue mode where all running execution would be returned
* fix: Update n8n node to allow for workflow ids with letters
* set upstream on set branch
* remove typo
* add nodeAccess to credentials
* fix unsaved run check for undefined id
* fix(core): Rename version control feature to source control (#6480)
* rename versionControl to sourceControl
* fix source control tooltip wording
---------
Co-authored-by: Romain Minaud <romain.minaud@gmail.com>
* fix(editor): Pay 548 hide the set up version control button (#6485)
* feat(DebugHelper Node): Fix and include in main app (#6406)
* improve node a bit
* fixing continueOnFail() ton contain error in json
* improve pairedItem
* fix random data returning object results
* fix nanoId length typo
* update pnpm-lock file
---------
Co-authored-by: Marcus <marcus@n8n.io>
* fix(editor): Remove setup source control CTA button
* fix(editor): Remove setup source control CTA button
---------
Co-authored-by: Michael Auerswald <michael.auerswald@gmail.com>
Co-authored-by: Marcus <marcus@n8n.io>
* fix(editor): Update source control docs links (#6488)
* feat(DebugHelper Node): Fix and include in main app (#6406)
* improve node a bit
* fixing continueOnFail() ton contain error in json
* improve pairedItem
* fix random data returning object results
* fix nanoId length typo
* update pnpm-lock file
---------
Co-authored-by: Marcus <marcus@n8n.io>
* feat(editor): Replace root events with event bus events (no-changelog) (#6454)
* feat: replace root events with event bus events
* fix: prevent cypress from replacing global with globalThis in import path
* feat: remove emitter mixin
* fix: replace component events with event bus
* fix: fix linting issue
* fix: fix breaking expression switch
* chore: prettify ndv e2e suite code
* fix(editor): Update source control docs links
---------
Co-authored-by: Michael Auerswald <michael.auerswald@gmail.com>
Co-authored-by: Marcus <marcus@n8n.io>
Co-authored-by: Alex Grozav <alex@grozav.com>
* fix tag endpoint regex
---------
Co-authored-by: Omar Ajoue <krynble@gmail.com>
Co-authored-by: Iván Ovejero <ivov.src@gmail.com>
Co-authored-by: Romain Minaud <romain.minaud@gmail.com>
Co-authored-by: Csaba Tuncsik <csaba@n8n.io>
Co-authored-by: Marcus <marcus@n8n.io>
Co-authored-by: Alex Grozav <alex@grozav.com>
* 🔧 Adjust base ESLint config
* 🔧 Adjust `lint` and `lintfix` in `nodes-base`
* 🔧 Include `test` and `utils` in `nodes-base`
* 📘 Convert JS tests to TS
* 👕 Apply lintfixes
* add typedi
* convert ActiveWorkflowRunner into an injectable service
* convert ExternalHooks into an injectable service
* convert InternalHooks into an injectable service
* convert LoadNodesAndCredentials into an injectable service
* convert NodeTypes and CredentialTypes into an injectable service
* convert ActiveExecutions into an injectable service
* convert WaitTracker into an injectable service
* convert Push into an injectable service
* convert ActiveWebhooks and TestWebhooks into an injectable services
* handle circular references, and log errors when a circular dependency is found
