node_exporter/collector/fixtures/proc/mdstat
Matthias Rampke 788ac9a859 Rearrange fixtures to match "real" proc and sys.
And add some missing fixtures for default collectors, even if they're
not read by tests yet.
2015-09-28 13:56:22 +00:00

27 lines
1 KiB
Plaintext

Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10]
md3 : active raid6 sda1[8] sdh1[7] sdg1[6] sdf1[5] sde1[11] sdd1[3] sdc1[10] sdb1[9]
5853468288 blocks super 1.2 level 6, 64k chunk, algorithm 2 [8/8] [UUUUUUUU]
md127 : active raid1 sdi2[0] sdj2[1]
312319552 blocks [2/2] [UU]
md0 : active raid1 sdi1[0] sdj1[1]
248896 blocks [2/2] [UU]
md4 : inactive raid1 sda3[0] sdb3[1]
4883648 blocks [2/2] [UU]
md6 : active raid1 sdb2[2] sda2[0]
195310144 blocks [2/1] [U_]
[=>...................] recovery = 8.5% (16775552/195310144) finish=17.0min speed=259783K/sec
md8 : active raid1 sdb1[1] sda1[0]
195310144 blocks [2/2] [UU]
[=>...................] resync = 8.5% (16775552/195310144) finish=17.0min speed=259783K/sec
md7 : active raid6 sdb1[0] sde1[3] sdd1[2] sdc1[1]
7813735424 blocks super 1.2 level 6, 512k chunk, algorithm 2 [4/3] [U_UU]
bitmap: 0/30 pages [0KB], 65536KB chunk
unused devices: <none>