prometheus/model/histogram/histogram_test.go

797 lines
26 KiB
Go
Raw Normal View History

Style cleanup of all the changes in sparsehistogram so far A lot of this code was hacked together, literally during a hackathon. This commit intends not to change the code substantially, but just make the code obey the usual style practices. A (possibly incomplete) list of areas: * Generally address linter warnings. * The `pgk` directory is deprecated as per dev-summit. No new packages should be added to it. I moved the new `pkg/histogram` package to `model` anticipating what's proposed in #9478. * Make the naming of the Sparse Histogram more consistent. Including abbreviations, there were just too many names for it: SparseHistogram, Histogram, Histo, hist, his, shs, h. The idea is to call it "Histogram" in general. Only add "Sparse" if it is needed to avoid confusion with conventional Histograms (which is rare because the TSDB really has no notion of conventional Histograms). Use abbreviations only in local scope, and then really abbreviate (not just removing three out of seven letters like in "Histo"). This is in the spirit of https://github.com/golang/go/wiki/CodeReviewComments#variable-names * Several other minor name changes. * A lot of formatting of doc comments. For one, following https://github.com/golang/go/wiki/CodeReviewComments#comment-sentences , but also layout question, anticipating how things will look like when rendered by `godoc` (even where `godoc` doesn't render them right now because they are for unexported types or not a doc comment at all but just a normal code comment - consistency is queen!). * Re-enabled `TestQueryLog` and `TestEndopints` (they pass now, leaving them disabled was presumably an oversight). * Bucket iterator for histogram.Histogram is now created with a method. * HistogramChunk.iterator now allows iterator recycling. (I think @dieterbe only commented it out because he was confused by the question in the comment.) * HistogramAppender.Append panics now because we decided to treat staleness marker differently. Signed-off-by: beorn7 <beorn@grafana.com>
2021-10-09 06:57:07 -07:00
// Copyright 2021 The Prometheus Authors
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
package histogram
import (
"fmt"
"math"
Style cleanup of all the changes in sparsehistogram so far A lot of this code was hacked together, literally during a hackathon. This commit intends not to change the code substantially, but just make the code obey the usual style practices. A (possibly incomplete) list of areas: * Generally address linter warnings. * The `pgk` directory is deprecated as per dev-summit. No new packages should be added to it. I moved the new `pkg/histogram` package to `model` anticipating what's proposed in #9478. * Make the naming of the Sparse Histogram more consistent. Including abbreviations, there were just too many names for it: SparseHistogram, Histogram, Histo, hist, his, shs, h. The idea is to call it "Histogram" in general. Only add "Sparse" if it is needed to avoid confusion with conventional Histograms (which is rare because the TSDB really has no notion of conventional Histograms). Use abbreviations only in local scope, and then really abbreviate (not just removing three out of seven letters like in "Histo"). This is in the spirit of https://github.com/golang/go/wiki/CodeReviewComments#variable-names * Several other minor name changes. * A lot of formatting of doc comments. For one, following https://github.com/golang/go/wiki/CodeReviewComments#comment-sentences , but also layout question, anticipating how things will look like when rendered by `godoc` (even where `godoc` doesn't render them right now because they are for unexported types or not a doc comment at all but just a normal code comment - consistency is queen!). * Re-enabled `TestQueryLog` and `TestEndopints` (they pass now, leaving them disabled was presumably an oversight). * Bucket iterator for histogram.Histogram is now created with a method. * HistogramChunk.iterator now allows iterator recycling. (I think @dieterbe only commented it out because he was confused by the question in the comment.) * HistogramAppender.Append panics now because we decided to treat staleness marker differently. Signed-off-by: beorn7 <beorn@grafana.com>
2021-10-09 06:57:07 -07:00
"testing"
"github.com/stretchr/testify/require"
)
func TestHistogramString(t *testing.T) {
cases := []struct {
histogram Histogram
expectedString string
}{
{
histogram: Histogram{
Schema: 0,
},
expectedString: "{count:0, sum:0}",
},
{
histogram: Histogram{
Schema: 0,
Count: 9,
Sum: -3.1415,
ZeroCount: 12,
ZeroThreshold: 0.001,
NegativeSpans: []Span{
{Offset: 0, Length: 5},
{Offset: 1, Length: 1},
},
NegativeBuckets: []int64{1, 2, -2, 1, -1, 0},
},
expectedString: "{count:9, sum:-3.1415, [-64,-32):1, [-16,-8):1, [-8,-4):2, [-4,-2):1, [-2,-1):3, [-1,-0.5):1, [-0.001,0.001]:12}",
},
{
histogram: Histogram{
Schema: 0,
Count: 19,
Sum: 2.7,
PositiveSpans: []Span{
{Offset: 0, Length: 4},
{Offset: 0, Length: 0},
{Offset: 0, Length: 3},
},
PositiveBuckets: []int64{1, 2, -2, 1, -1, 0, 0},
NegativeSpans: []Span{
{Offset: 0, Length: 5},
{Offset: 1, Length: 0},
{Offset: 0, Length: 1},
},
NegativeBuckets: []int64{1, 2, -2, 1, -1, 0},
},
expectedString: "{count:19, sum:2.7, [-64,-32):1, [-16,-8):1, [-8,-4):2, [-4,-2):1, [-2,-1):3, [-1,-0.5):1, (0.5,1]:1, (1,2]:3, (2,4]:1, (4,8]:2, (8,16]:1, (16,32]:1, (32,64]:1}",
},
}
for i, c := range cases {
t.Run(fmt.Sprintf("%d", i), func(t *testing.T) {
actualString := c.histogram.String()
require.Equal(t, c.expectedString, actualString)
})
}
}
Style cleanup of all the changes in sparsehistogram so far A lot of this code was hacked together, literally during a hackathon. This commit intends not to change the code substantially, but just make the code obey the usual style practices. A (possibly incomplete) list of areas: * Generally address linter warnings. * The `pgk` directory is deprecated as per dev-summit. No new packages should be added to it. I moved the new `pkg/histogram` package to `model` anticipating what's proposed in #9478. * Make the naming of the Sparse Histogram more consistent. Including abbreviations, there were just too many names for it: SparseHistogram, Histogram, Histo, hist, his, shs, h. The idea is to call it "Histogram" in general. Only add "Sparse" if it is needed to avoid confusion with conventional Histograms (which is rare because the TSDB really has no notion of conventional Histograms). Use abbreviations only in local scope, and then really abbreviate (not just removing three out of seven letters like in "Histo"). This is in the spirit of https://github.com/golang/go/wiki/CodeReviewComments#variable-names * Several other minor name changes. * A lot of formatting of doc comments. For one, following https://github.com/golang/go/wiki/CodeReviewComments#comment-sentences , but also layout question, anticipating how things will look like when rendered by `godoc` (even where `godoc` doesn't render them right now because they are for unexported types or not a doc comment at all but just a normal code comment - consistency is queen!). * Re-enabled `TestQueryLog` and `TestEndopints` (they pass now, leaving them disabled was presumably an oversight). * Bucket iterator for histogram.Histogram is now created with a method. * HistogramChunk.iterator now allows iterator recycling. (I think @dieterbe only commented it out because he was confused by the question in the comment.) * HistogramAppender.Append panics now because we decided to treat staleness marker differently. Signed-off-by: beorn7 <beorn@grafana.com>
2021-10-09 06:57:07 -07:00
func TestCumulativeBucketIterator(t *testing.T) {
cases := []struct {
histogram Histogram
expectedBuckets []Bucket[uint64]
Style cleanup of all the changes in sparsehistogram so far A lot of this code was hacked together, literally during a hackathon. This commit intends not to change the code substantially, but just make the code obey the usual style practices. A (possibly incomplete) list of areas: * Generally address linter warnings. * The `pgk` directory is deprecated as per dev-summit. No new packages should be added to it. I moved the new `pkg/histogram` package to `model` anticipating what's proposed in #9478. * Make the naming of the Sparse Histogram more consistent. Including abbreviations, there were just too many names for it: SparseHistogram, Histogram, Histo, hist, his, shs, h. The idea is to call it "Histogram" in general. Only add "Sparse" if it is needed to avoid confusion with conventional Histograms (which is rare because the TSDB really has no notion of conventional Histograms). Use abbreviations only in local scope, and then really abbreviate (not just removing three out of seven letters like in "Histo"). This is in the spirit of https://github.com/golang/go/wiki/CodeReviewComments#variable-names * Several other minor name changes. * A lot of formatting of doc comments. For one, following https://github.com/golang/go/wiki/CodeReviewComments#comment-sentences , but also layout question, anticipating how things will look like when rendered by `godoc` (even where `godoc` doesn't render them right now because they are for unexported types or not a doc comment at all but just a normal code comment - consistency is queen!). * Re-enabled `TestQueryLog` and `TestEndopints` (they pass now, leaving them disabled was presumably an oversight). * Bucket iterator for histogram.Histogram is now created with a method. * HistogramChunk.iterator now allows iterator recycling. (I think @dieterbe only commented it out because he was confused by the question in the comment.) * HistogramAppender.Append panics now because we decided to treat staleness marker differently. Signed-off-by: beorn7 <beorn@grafana.com>
2021-10-09 06:57:07 -07:00
}{
{
histogram: Histogram{
Schema: 0,
PositiveSpans: []Span{
{Offset: 0, Length: 2},
{Offset: 1, Length: 2},
},
PositiveBuckets: []int64{1, 1, -1, 0},
},
expectedBuckets: []Bucket[uint64]{
{Lower: math.Inf(-1), Upper: 1, Count: 1, LowerInclusive: true, UpperInclusive: true, Index: 0},
{Lower: math.Inf(-1), Upper: 2, Count: 3, LowerInclusive: true, UpperInclusive: true, Index: 1},
Style cleanup of all the changes in sparsehistogram so far A lot of this code was hacked together, literally during a hackathon. This commit intends not to change the code substantially, but just make the code obey the usual style practices. A (possibly incomplete) list of areas: * Generally address linter warnings. * The `pgk` directory is deprecated as per dev-summit. No new packages should be added to it. I moved the new `pkg/histogram` package to `model` anticipating what's proposed in #9478. * Make the naming of the Sparse Histogram more consistent. Including abbreviations, there were just too many names for it: SparseHistogram, Histogram, Histo, hist, his, shs, h. The idea is to call it "Histogram" in general. Only add "Sparse" if it is needed to avoid confusion with conventional Histograms (which is rare because the TSDB really has no notion of conventional Histograms). Use abbreviations only in local scope, and then really abbreviate (not just removing three out of seven letters like in "Histo"). This is in the spirit of https://github.com/golang/go/wiki/CodeReviewComments#variable-names * Several other minor name changes. * A lot of formatting of doc comments. For one, following https://github.com/golang/go/wiki/CodeReviewComments#comment-sentences , but also layout question, anticipating how things will look like when rendered by `godoc` (even where `godoc` doesn't render them right now because they are for unexported types or not a doc comment at all but just a normal code comment - consistency is queen!). * Re-enabled `TestQueryLog` and `TestEndopints` (they pass now, leaving them disabled was presumably an oversight). * Bucket iterator for histogram.Histogram is now created with a method. * HistogramChunk.iterator now allows iterator recycling. (I think @dieterbe only commented it out because he was confused by the question in the comment.) * HistogramAppender.Append panics now because we decided to treat staleness marker differently. Signed-off-by: beorn7 <beorn@grafana.com>
2021-10-09 06:57:07 -07:00
{Lower: math.Inf(-1), Upper: 4, Count: 3, LowerInclusive: true, UpperInclusive: true, Index: 2},
Style cleanup of all the changes in sparsehistogram so far A lot of this code was hacked together, literally during a hackathon. This commit intends not to change the code substantially, but just make the code obey the usual style practices. A (possibly incomplete) list of areas: * Generally address linter warnings. * The `pgk` directory is deprecated as per dev-summit. No new packages should be added to it. I moved the new `pkg/histogram` package to `model` anticipating what's proposed in #9478. * Make the naming of the Sparse Histogram more consistent. Including abbreviations, there were just too many names for it: SparseHistogram, Histogram, Histo, hist, his, shs, h. The idea is to call it "Histogram" in general. Only add "Sparse" if it is needed to avoid confusion with conventional Histograms (which is rare because the TSDB really has no notion of conventional Histograms). Use abbreviations only in local scope, and then really abbreviate (not just removing three out of seven letters like in "Histo"). This is in the spirit of https://github.com/golang/go/wiki/CodeReviewComments#variable-names * Several other minor name changes. * A lot of formatting of doc comments. For one, following https://github.com/golang/go/wiki/CodeReviewComments#comment-sentences , but also layout question, anticipating how things will look like when rendered by `godoc` (even where `godoc` doesn't render them right now because they are for unexported types or not a doc comment at all but just a normal code comment - consistency is queen!). * Re-enabled `TestQueryLog` and `TestEndopints` (they pass now, leaving them disabled was presumably an oversight). * Bucket iterator for histogram.Histogram is now created with a method. * HistogramChunk.iterator now allows iterator recycling. (I think @dieterbe only commented it out because he was confused by the question in the comment.) * HistogramAppender.Append panics now because we decided to treat staleness marker differently. Signed-off-by: beorn7 <beorn@grafana.com>
2021-10-09 06:57:07 -07:00
{Lower: math.Inf(-1), Upper: 8, Count: 4, LowerInclusive: true, UpperInclusive: true, Index: 3},
{Lower: math.Inf(-1), Upper: 16, Count: 5, LowerInclusive: true, UpperInclusive: true, Index: 4},
Style cleanup of all the changes in sparsehistogram so far A lot of this code was hacked together, literally during a hackathon. This commit intends not to change the code substantially, but just make the code obey the usual style practices. A (possibly incomplete) list of areas: * Generally address linter warnings. * The `pgk` directory is deprecated as per dev-summit. No new packages should be added to it. I moved the new `pkg/histogram` package to `model` anticipating what's proposed in #9478. * Make the naming of the Sparse Histogram more consistent. Including abbreviations, there were just too many names for it: SparseHistogram, Histogram, Histo, hist, his, shs, h. The idea is to call it "Histogram" in general. Only add "Sparse" if it is needed to avoid confusion with conventional Histograms (which is rare because the TSDB really has no notion of conventional Histograms). Use abbreviations only in local scope, and then really abbreviate (not just removing three out of seven letters like in "Histo"). This is in the spirit of https://github.com/golang/go/wiki/CodeReviewComments#variable-names * Several other minor name changes. * A lot of formatting of doc comments. For one, following https://github.com/golang/go/wiki/CodeReviewComments#comment-sentences , but also layout question, anticipating how things will look like when rendered by `godoc` (even where `godoc` doesn't render them right now because they are for unexported types or not a doc comment at all but just a normal code comment - consistency is queen!). * Re-enabled `TestQueryLog` and `TestEndopints` (they pass now, leaving them disabled was presumably an oversight). * Bucket iterator for histogram.Histogram is now created with a method. * HistogramChunk.iterator now allows iterator recycling. (I think @dieterbe only commented it out because he was confused by the question in the comment.) * HistogramAppender.Append panics now because we decided to treat staleness marker differently. Signed-off-by: beorn7 <beorn@grafana.com>
2021-10-09 06:57:07 -07:00
},
},
{
histogram: Histogram{
Schema: 0,
PositiveSpans: []Span{
{Offset: 0, Length: 5},
{Offset: 1, Length: 1},
},
PositiveBuckets: []int64{1, 2, -2, 1, -1, 0},
},
expectedBuckets: []Bucket[uint64]{
{Lower: math.Inf(-1), Upper: 1, Count: 1, LowerInclusive: true, UpperInclusive: true, Index: 0},
{Lower: math.Inf(-1), Upper: 2, Count: 4, LowerInclusive: true, UpperInclusive: true, Index: 1},
{Lower: math.Inf(-1), Upper: 4, Count: 5, LowerInclusive: true, UpperInclusive: true, Index: 2},
{Lower: math.Inf(-1), Upper: 8, Count: 7, LowerInclusive: true, UpperInclusive: true, Index: 3},
Style cleanup of all the changes in sparsehistogram so far A lot of this code was hacked together, literally during a hackathon. This commit intends not to change the code substantially, but just make the code obey the usual style practices. A (possibly incomplete) list of areas: * Generally address linter warnings. * The `pgk` directory is deprecated as per dev-summit. No new packages should be added to it. I moved the new `pkg/histogram` package to `model` anticipating what's proposed in #9478. * Make the naming of the Sparse Histogram more consistent. Including abbreviations, there were just too many names for it: SparseHistogram, Histogram, Histo, hist, his, shs, h. The idea is to call it "Histogram" in general. Only add "Sparse" if it is needed to avoid confusion with conventional Histograms (which is rare because the TSDB really has no notion of conventional Histograms). Use abbreviations only in local scope, and then really abbreviate (not just removing three out of seven letters like in "Histo"). This is in the spirit of https://github.com/golang/go/wiki/CodeReviewComments#variable-names * Several other minor name changes. * A lot of formatting of doc comments. For one, following https://github.com/golang/go/wiki/CodeReviewComments#comment-sentences , but also layout question, anticipating how things will look like when rendered by `godoc` (even where `godoc` doesn't render them right now because they are for unexported types or not a doc comment at all but just a normal code comment - consistency is queen!). * Re-enabled `TestQueryLog` and `TestEndopints` (they pass now, leaving them disabled was presumably an oversight). * Bucket iterator for histogram.Histogram is now created with a method. * HistogramChunk.iterator now allows iterator recycling. (I think @dieterbe only commented it out because he was confused by the question in the comment.) * HistogramAppender.Append panics now because we decided to treat staleness marker differently. Signed-off-by: beorn7 <beorn@grafana.com>
2021-10-09 06:57:07 -07:00
{Lower: math.Inf(-1), Upper: 16, Count: 8, LowerInclusive: true, UpperInclusive: true, Index: 4},
Style cleanup of all the changes in sparsehistogram so far A lot of this code was hacked together, literally during a hackathon. This commit intends not to change the code substantially, but just make the code obey the usual style practices. A (possibly incomplete) list of areas: * Generally address linter warnings. * The `pgk` directory is deprecated as per dev-summit. No new packages should be added to it. I moved the new `pkg/histogram` package to `model` anticipating what's proposed in #9478. * Make the naming of the Sparse Histogram more consistent. Including abbreviations, there were just too many names for it: SparseHistogram, Histogram, Histo, hist, his, shs, h. The idea is to call it "Histogram" in general. Only add "Sparse" if it is needed to avoid confusion with conventional Histograms (which is rare because the TSDB really has no notion of conventional Histograms). Use abbreviations only in local scope, and then really abbreviate (not just removing three out of seven letters like in "Histo"). This is in the spirit of https://github.com/golang/go/wiki/CodeReviewComments#variable-names * Several other minor name changes. * A lot of formatting of doc comments. For one, following https://github.com/golang/go/wiki/CodeReviewComments#comment-sentences , but also layout question, anticipating how things will look like when rendered by `godoc` (even where `godoc` doesn't render them right now because they are for unexported types or not a doc comment at all but just a normal code comment - consistency is queen!). * Re-enabled `TestQueryLog` and `TestEndopints` (they pass now, leaving them disabled was presumably an oversight). * Bucket iterator for histogram.Histogram is now created with a method. * HistogramChunk.iterator now allows iterator recycling. (I think @dieterbe only commented it out because he was confused by the question in the comment.) * HistogramAppender.Append panics now because we decided to treat staleness marker differently. Signed-off-by: beorn7 <beorn@grafana.com>
2021-10-09 06:57:07 -07:00
{Lower: math.Inf(-1), Upper: 32, Count: 8, LowerInclusive: true, UpperInclusive: true, Index: 5},
{Lower: math.Inf(-1), Upper: 64, Count: 9, LowerInclusive: true, UpperInclusive: true, Index: 6},
Style cleanup of all the changes in sparsehistogram so far A lot of this code was hacked together, literally during a hackathon. This commit intends not to change the code substantially, but just make the code obey the usual style practices. A (possibly incomplete) list of areas: * Generally address linter warnings. * The `pgk` directory is deprecated as per dev-summit. No new packages should be added to it. I moved the new `pkg/histogram` package to `model` anticipating what's proposed in #9478. * Make the naming of the Sparse Histogram more consistent. Including abbreviations, there were just too many names for it: SparseHistogram, Histogram, Histo, hist, his, shs, h. The idea is to call it "Histogram" in general. Only add "Sparse" if it is needed to avoid confusion with conventional Histograms (which is rare because the TSDB really has no notion of conventional Histograms). Use abbreviations only in local scope, and then really abbreviate (not just removing three out of seven letters like in "Histo"). This is in the spirit of https://github.com/golang/go/wiki/CodeReviewComments#variable-names * Several other minor name changes. * A lot of formatting of doc comments. For one, following https://github.com/golang/go/wiki/CodeReviewComments#comment-sentences , but also layout question, anticipating how things will look like when rendered by `godoc` (even where `godoc` doesn't render them right now because they are for unexported types or not a doc comment at all but just a normal code comment - consistency is queen!). * Re-enabled `TestQueryLog` and `TestEndopints` (they pass now, leaving them disabled was presumably an oversight). * Bucket iterator for histogram.Histogram is now created with a method. * HistogramChunk.iterator now allows iterator recycling. (I think @dieterbe only commented it out because he was confused by the question in the comment.) * HistogramAppender.Append panics now because we decided to treat staleness marker differently. Signed-off-by: beorn7 <beorn@grafana.com>
2021-10-09 06:57:07 -07:00
},
},
{
histogram: Histogram{
Schema: 0,
PositiveSpans: []Span{
{Offset: 0, Length: 7},
},
PositiveBuckets: []int64{1, 2, -2, 1, -1, 0, 0},
},
expectedBuckets: []Bucket[uint64]{
{Lower: math.Inf(-1), Upper: 1, Count: 1, LowerInclusive: true, UpperInclusive: true, Index: 0},
{Lower: math.Inf(-1), Upper: 2, Count: 4, LowerInclusive: true, UpperInclusive: true, Index: 1},
{Lower: math.Inf(-1), Upper: 4, Count: 5, LowerInclusive: true, UpperInclusive: true, Index: 2},
{Lower: math.Inf(-1), Upper: 8, Count: 7, LowerInclusive: true, UpperInclusive: true, Index: 3},
{Lower: math.Inf(-1), Upper: 16, Count: 8, LowerInclusive: true, UpperInclusive: true, Index: 4},
{Lower: math.Inf(-1), Upper: 32, Count: 9, LowerInclusive: true, UpperInclusive: true, Index: 5},
{Lower: math.Inf(-1), Upper: 64, Count: 10, LowerInclusive: true, UpperInclusive: true, Index: 6},
Style cleanup of all the changes in sparsehistogram so far A lot of this code was hacked together, literally during a hackathon. This commit intends not to change the code substantially, but just make the code obey the usual style practices. A (possibly incomplete) list of areas: * Generally address linter warnings. * The `pgk` directory is deprecated as per dev-summit. No new packages should be added to it. I moved the new `pkg/histogram` package to `model` anticipating what's proposed in #9478. * Make the naming of the Sparse Histogram more consistent. Including abbreviations, there were just too many names for it: SparseHistogram, Histogram, Histo, hist, his, shs, h. The idea is to call it "Histogram" in general. Only add "Sparse" if it is needed to avoid confusion with conventional Histograms (which is rare because the TSDB really has no notion of conventional Histograms). Use abbreviations only in local scope, and then really abbreviate (not just removing three out of seven letters like in "Histo"). This is in the spirit of https://github.com/golang/go/wiki/CodeReviewComments#variable-names * Several other minor name changes. * A lot of formatting of doc comments. For one, following https://github.com/golang/go/wiki/CodeReviewComments#comment-sentences , but also layout question, anticipating how things will look like when rendered by `godoc` (even where `godoc` doesn't render them right now because they are for unexported types or not a doc comment at all but just a normal code comment - consistency is queen!). * Re-enabled `TestQueryLog` and `TestEndopints` (they pass now, leaving them disabled was presumably an oversight). * Bucket iterator for histogram.Histogram is now created with a method. * HistogramChunk.iterator now allows iterator recycling. (I think @dieterbe only commented it out because he was confused by the question in the comment.) * HistogramAppender.Append panics now because we decided to treat staleness marker differently. Signed-off-by: beorn7 <beorn@grafana.com>
2021-10-09 06:57:07 -07:00
},
},
{
histogram: Histogram{
Schema: 3,
PositiveSpans: []Span{
{Offset: -5, Length: 2}, // -5 -4
{Offset: 2, Length: 3}, // -1 0 1
{Offset: 2, Length: 2}, // 4 5
},
PositiveBuckets: []int64{1, 2, -2, 1, -1, 0, 3},
},
expectedBuckets: []Bucket[uint64]{
{Lower: math.Inf(-1), Upper: 0.6484197773255048, Count: 1, LowerInclusive: true, UpperInclusive: true, Index: -5},
{Lower: math.Inf(-1), Upper: 0.7071067811865475, Count: 4, LowerInclusive: true, UpperInclusive: true, Index: -4},
Style cleanup of all the changes in sparsehistogram so far A lot of this code was hacked together, literally during a hackathon. This commit intends not to change the code substantially, but just make the code obey the usual style practices. A (possibly incomplete) list of areas: * Generally address linter warnings. * The `pgk` directory is deprecated as per dev-summit. No new packages should be added to it. I moved the new `pkg/histogram` package to `model` anticipating what's proposed in #9478. * Make the naming of the Sparse Histogram more consistent. Including abbreviations, there were just too many names for it: SparseHistogram, Histogram, Histo, hist, his, shs, h. The idea is to call it "Histogram" in general. Only add "Sparse" if it is needed to avoid confusion with conventional Histograms (which is rare because the TSDB really has no notion of conventional Histograms). Use abbreviations only in local scope, and then really abbreviate (not just removing three out of seven letters like in "Histo"). This is in the spirit of https://github.com/golang/go/wiki/CodeReviewComments#variable-names * Several other minor name changes. * A lot of formatting of doc comments. For one, following https://github.com/golang/go/wiki/CodeReviewComments#comment-sentences , but also layout question, anticipating how things will look like when rendered by `godoc` (even where `godoc` doesn't render them right now because they are for unexported types or not a doc comment at all but just a normal code comment - consistency is queen!). * Re-enabled `TestQueryLog` and `TestEndopints` (they pass now, leaving them disabled was presumably an oversight). * Bucket iterator for histogram.Histogram is now created with a method. * HistogramChunk.iterator now allows iterator recycling. (I think @dieterbe only commented it out because he was confused by the question in the comment.) * HistogramAppender.Append panics now because we decided to treat staleness marker differently. Signed-off-by: beorn7 <beorn@grafana.com>
2021-10-09 06:57:07 -07:00
{Lower: math.Inf(-1), Upper: 0.7711054127039704, Count: 4, LowerInclusive: true, UpperInclusive: true, Index: -3},
{Lower: math.Inf(-1), Upper: 0.8408964152537144, Count: 4, LowerInclusive: true, UpperInclusive: true, Index: -2},
Style cleanup of all the changes in sparsehistogram so far A lot of this code was hacked together, literally during a hackathon. This commit intends not to change the code substantially, but just make the code obey the usual style practices. A (possibly incomplete) list of areas: * Generally address linter warnings. * The `pgk` directory is deprecated as per dev-summit. No new packages should be added to it. I moved the new `pkg/histogram` package to `model` anticipating what's proposed in #9478. * Make the naming of the Sparse Histogram more consistent. Including abbreviations, there were just too many names for it: SparseHistogram, Histogram, Histo, hist, his, shs, h. The idea is to call it "Histogram" in general. Only add "Sparse" if it is needed to avoid confusion with conventional Histograms (which is rare because the TSDB really has no notion of conventional Histograms). Use abbreviations only in local scope, and then really abbreviate (not just removing three out of seven letters like in "Histo"). This is in the spirit of https://github.com/golang/go/wiki/CodeReviewComments#variable-names * Several other minor name changes. * A lot of formatting of doc comments. For one, following https://github.com/golang/go/wiki/CodeReviewComments#comment-sentences , but also layout question, anticipating how things will look like when rendered by `godoc` (even where `godoc` doesn't render them right now because they are for unexported types or not a doc comment at all but just a normal code comment - consistency is queen!). * Re-enabled `TestQueryLog` and `TestEndopints` (they pass now, leaving them disabled was presumably an oversight). * Bucket iterator for histogram.Histogram is now created with a method. * HistogramChunk.iterator now allows iterator recycling. (I think @dieterbe only commented it out because he was confused by the question in the comment.) * HistogramAppender.Append panics now because we decided to treat staleness marker differently. Signed-off-by: beorn7 <beorn@grafana.com>
2021-10-09 06:57:07 -07:00
{Lower: math.Inf(-1), Upper: 0.9170040432046711, Count: 5, LowerInclusive: true, UpperInclusive: true, Index: -1},
{Lower: math.Inf(-1), Upper: 1, Count: 7, LowerInclusive: true, UpperInclusive: true, Index: 0},
{Lower: math.Inf(-1), Upper: 1.0905077326652577, Count: 8, LowerInclusive: true, UpperInclusive: true, Index: 1},
Style cleanup of all the changes in sparsehistogram so far A lot of this code was hacked together, literally during a hackathon. This commit intends not to change the code substantially, but just make the code obey the usual style practices. A (possibly incomplete) list of areas: * Generally address linter warnings. * The `pgk` directory is deprecated as per dev-summit. No new packages should be added to it. I moved the new `pkg/histogram` package to `model` anticipating what's proposed in #9478. * Make the naming of the Sparse Histogram more consistent. Including abbreviations, there were just too many names for it: SparseHistogram, Histogram, Histo, hist, his, shs, h. The idea is to call it "Histogram" in general. Only add "Sparse" if it is needed to avoid confusion with conventional Histograms (which is rare because the TSDB really has no notion of conventional Histograms). Use abbreviations only in local scope, and then really abbreviate (not just removing three out of seven letters like in "Histo"). This is in the spirit of https://github.com/golang/go/wiki/CodeReviewComments#variable-names * Several other minor name changes. * A lot of formatting of doc comments. For one, following https://github.com/golang/go/wiki/CodeReviewComments#comment-sentences , but also layout question, anticipating how things will look like when rendered by `godoc` (even where `godoc` doesn't render them right now because they are for unexported types or not a doc comment at all but just a normal code comment - consistency is queen!). * Re-enabled `TestQueryLog` and `TestEndopints` (they pass now, leaving them disabled was presumably an oversight). * Bucket iterator for histogram.Histogram is now created with a method. * HistogramChunk.iterator now allows iterator recycling. (I think @dieterbe only commented it out because he was confused by the question in the comment.) * HistogramAppender.Append panics now because we decided to treat staleness marker differently. Signed-off-by: beorn7 <beorn@grafana.com>
2021-10-09 06:57:07 -07:00
{Lower: math.Inf(-1), Upper: 1.189207115002721, Count: 8, LowerInclusive: true, UpperInclusive: true, Index: 2},
{Lower: math.Inf(-1), Upper: 1.2968395546510096, Count: 8, LowerInclusive: true, UpperInclusive: true, Index: 3},
Style cleanup of all the changes in sparsehistogram so far A lot of this code was hacked together, literally during a hackathon. This commit intends not to change the code substantially, but just make the code obey the usual style practices. A (possibly incomplete) list of areas: * Generally address linter warnings. * The `pgk` directory is deprecated as per dev-summit. No new packages should be added to it. I moved the new `pkg/histogram` package to `model` anticipating what's proposed in #9478. * Make the naming of the Sparse Histogram more consistent. Including abbreviations, there were just too many names for it: SparseHistogram, Histogram, Histo, hist, his, shs, h. The idea is to call it "Histogram" in general. Only add "Sparse" if it is needed to avoid confusion with conventional Histograms (which is rare because the TSDB really has no notion of conventional Histograms). Use abbreviations only in local scope, and then really abbreviate (not just removing three out of seven letters like in "Histo"). This is in the spirit of https://github.com/golang/go/wiki/CodeReviewComments#variable-names * Several other minor name changes. * A lot of formatting of doc comments. For one, following https://github.com/golang/go/wiki/CodeReviewComments#comment-sentences , but also layout question, anticipating how things will look like when rendered by `godoc` (even where `godoc` doesn't render them right now because they are for unexported types or not a doc comment at all but just a normal code comment - consistency is queen!). * Re-enabled `TestQueryLog` and `TestEndopints` (they pass now, leaving them disabled was presumably an oversight). * Bucket iterator for histogram.Histogram is now created with a method. * HistogramChunk.iterator now allows iterator recycling. (I think @dieterbe only commented it out because he was confused by the question in the comment.) * HistogramAppender.Append panics now because we decided to treat staleness marker differently. Signed-off-by: beorn7 <beorn@grafana.com>
2021-10-09 06:57:07 -07:00
{Lower: math.Inf(-1), Upper: 1.414213562373095, Count: 9, LowerInclusive: true, UpperInclusive: true, Index: 4},
{Lower: math.Inf(-1), Upper: 1.5422108254079407, Count: 13, LowerInclusive: true, UpperInclusive: true, Index: 5},
Style cleanup of all the changes in sparsehistogram so far A lot of this code was hacked together, literally during a hackathon. This commit intends not to change the code substantially, but just make the code obey the usual style practices. A (possibly incomplete) list of areas: * Generally address linter warnings. * The `pgk` directory is deprecated as per dev-summit. No new packages should be added to it. I moved the new `pkg/histogram` package to `model` anticipating what's proposed in #9478. * Make the naming of the Sparse Histogram more consistent. Including abbreviations, there were just too many names for it: SparseHistogram, Histogram, Histo, hist, his, shs, h. The idea is to call it "Histogram" in general. Only add "Sparse" if it is needed to avoid confusion with conventional Histograms (which is rare because the TSDB really has no notion of conventional Histograms). Use abbreviations only in local scope, and then really abbreviate (not just removing three out of seven letters like in "Histo"). This is in the spirit of https://github.com/golang/go/wiki/CodeReviewComments#variable-names * Several other minor name changes. * A lot of formatting of doc comments. For one, following https://github.com/golang/go/wiki/CodeReviewComments#comment-sentences , but also layout question, anticipating how things will look like when rendered by `godoc` (even where `godoc` doesn't render them right now because they are for unexported types or not a doc comment at all but just a normal code comment - consistency is queen!). * Re-enabled `TestQueryLog` and `TestEndopints` (they pass now, leaving them disabled was presumably an oversight). * Bucket iterator for histogram.Histogram is now created with a method. * HistogramChunk.iterator now allows iterator recycling. (I think @dieterbe only commented it out because he was confused by the question in the comment.) * HistogramAppender.Append panics now because we decided to treat staleness marker differently. Signed-off-by: beorn7 <beorn@grafana.com>
2021-10-09 06:57:07 -07:00
},
},
{
histogram: Histogram{
Schema: -2,
PositiveSpans: []Span{
{Offset: -2, Length: 4}, // -2 -1 0 1
{Offset: 2, Length: 2}, // 4 5
},
PositiveBuckets: []int64{1, 2, -2, 1, -1, 0},
},
expectedBuckets: []Bucket[uint64]{
{Lower: math.Inf(-1), Upper: 0.00390625, Count: 1, LowerInclusive: true, UpperInclusive: true, Index: -2},
{Lower: math.Inf(-1), Upper: 0.0625, Count: 4, LowerInclusive: true, UpperInclusive: true, Index: -1},
{Lower: math.Inf(-1), Upper: 1, Count: 5, LowerInclusive: true, UpperInclusive: true, Index: 0},
{Lower: math.Inf(-1), Upper: 16, Count: 7, LowerInclusive: true, UpperInclusive: true, Index: 1},
Style cleanup of all the changes in sparsehistogram so far A lot of this code was hacked together, literally during a hackathon. This commit intends not to change the code substantially, but just make the code obey the usual style practices. A (possibly incomplete) list of areas: * Generally address linter warnings. * The `pgk` directory is deprecated as per dev-summit. No new packages should be added to it. I moved the new `pkg/histogram` package to `model` anticipating what's proposed in #9478. * Make the naming of the Sparse Histogram more consistent. Including abbreviations, there were just too many names for it: SparseHistogram, Histogram, Histo, hist, his, shs, h. The idea is to call it "Histogram" in general. Only add "Sparse" if it is needed to avoid confusion with conventional Histograms (which is rare because the TSDB really has no notion of conventional Histograms). Use abbreviations only in local scope, and then really abbreviate (not just removing three out of seven letters like in "Histo"). This is in the spirit of https://github.com/golang/go/wiki/CodeReviewComments#variable-names * Several other minor name changes. * A lot of formatting of doc comments. For one, following https://github.com/golang/go/wiki/CodeReviewComments#comment-sentences , but also layout question, anticipating how things will look like when rendered by `godoc` (even where `godoc` doesn't render them right now because they are for unexported types or not a doc comment at all but just a normal code comment - consistency is queen!). * Re-enabled `TestQueryLog` and `TestEndopints` (they pass now, leaving them disabled was presumably an oversight). * Bucket iterator for histogram.Histogram is now created with a method. * HistogramChunk.iterator now allows iterator recycling. (I think @dieterbe only commented it out because he was confused by the question in the comment.) * HistogramAppender.Append panics now because we decided to treat staleness marker differently. Signed-off-by: beorn7 <beorn@grafana.com>
2021-10-09 06:57:07 -07:00
{Lower: math.Inf(-1), Upper: 256, Count: 7, LowerInclusive: true, UpperInclusive: true, Index: 2},
{Lower: math.Inf(-1), Upper: 4096, Count: 7, LowerInclusive: true, UpperInclusive: true, Index: 3},
Style cleanup of all the changes in sparsehistogram so far A lot of this code was hacked together, literally during a hackathon. This commit intends not to change the code substantially, but just make the code obey the usual style practices. A (possibly incomplete) list of areas: * Generally address linter warnings. * The `pgk` directory is deprecated as per dev-summit. No new packages should be added to it. I moved the new `pkg/histogram` package to `model` anticipating what's proposed in #9478. * Make the naming of the Sparse Histogram more consistent. Including abbreviations, there were just too many names for it: SparseHistogram, Histogram, Histo, hist, his, shs, h. The idea is to call it "Histogram" in general. Only add "Sparse" if it is needed to avoid confusion with conventional Histograms (which is rare because the TSDB really has no notion of conventional Histograms). Use abbreviations only in local scope, and then really abbreviate (not just removing three out of seven letters like in "Histo"). This is in the spirit of https://github.com/golang/go/wiki/CodeReviewComments#variable-names * Several other minor name changes. * A lot of formatting of doc comments. For one, following https://github.com/golang/go/wiki/CodeReviewComments#comment-sentences , but also layout question, anticipating how things will look like when rendered by `godoc` (even where `godoc` doesn't render them right now because they are for unexported types or not a doc comment at all but just a normal code comment - consistency is queen!). * Re-enabled `TestQueryLog` and `TestEndopints` (they pass now, leaving them disabled was presumably an oversight). * Bucket iterator for histogram.Histogram is now created with a method. * HistogramChunk.iterator now allows iterator recycling. (I think @dieterbe only commented it out because he was confused by the question in the comment.) * HistogramAppender.Append panics now because we decided to treat staleness marker differently. Signed-off-by: beorn7 <beorn@grafana.com>
2021-10-09 06:57:07 -07:00
{Lower: math.Inf(-1), Upper: 65536, Count: 8, LowerInclusive: true, UpperInclusive: true, Index: 4},
{Lower: math.Inf(-1), Upper: 1048576, Count: 9, LowerInclusive: true, UpperInclusive: true, Index: 5},
Style cleanup of all the changes in sparsehistogram so far A lot of this code was hacked together, literally during a hackathon. This commit intends not to change the code substantially, but just make the code obey the usual style practices. A (possibly incomplete) list of areas: * Generally address linter warnings. * The `pgk` directory is deprecated as per dev-summit. No new packages should be added to it. I moved the new `pkg/histogram` package to `model` anticipating what's proposed in #9478. * Make the naming of the Sparse Histogram more consistent. Including abbreviations, there were just too many names for it: SparseHistogram, Histogram, Histo, hist, his, shs, h. The idea is to call it "Histogram" in general. Only add "Sparse" if it is needed to avoid confusion with conventional Histograms (which is rare because the TSDB really has no notion of conventional Histograms). Use abbreviations only in local scope, and then really abbreviate (not just removing three out of seven letters like in "Histo"). This is in the spirit of https://github.com/golang/go/wiki/CodeReviewComments#variable-names * Several other minor name changes. * A lot of formatting of doc comments. For one, following https://github.com/golang/go/wiki/CodeReviewComments#comment-sentences , but also layout question, anticipating how things will look like when rendered by `godoc` (even where `godoc` doesn't render them right now because they are for unexported types or not a doc comment at all but just a normal code comment - consistency is queen!). * Re-enabled `TestQueryLog` and `TestEndopints` (they pass now, leaving them disabled was presumably an oversight). * Bucket iterator for histogram.Histogram is now created with a method. * HistogramChunk.iterator now allows iterator recycling. (I think @dieterbe only commented it out because he was confused by the question in the comment.) * HistogramAppender.Append panics now because we decided to treat staleness marker differently. Signed-off-by: beorn7 <beorn@grafana.com>
2021-10-09 06:57:07 -07:00
},
},
{
histogram: Histogram{
Schema: -1,
PositiveSpans: []Span{
{Offset: -2, Length: 5}, // -2 -1 0 1 2
},
PositiveBuckets: []int64{1, 2, -2, 1, -1},
},
expectedBuckets: []Bucket[uint64]{
{Lower: math.Inf(-1), Upper: 0.0625, Count: 1, LowerInclusive: true, UpperInclusive: true, Index: -2},
{Lower: math.Inf(-1), Upper: 0.25, Count: 4, LowerInclusive: true, UpperInclusive: true, Index: -1},
{Lower: math.Inf(-1), Upper: 1, Count: 5, LowerInclusive: true, UpperInclusive: true, Index: 0},
{Lower: math.Inf(-1), Upper: 4, Count: 7, LowerInclusive: true, UpperInclusive: true, Index: 1},
{Lower: math.Inf(-1), Upper: 16, Count: 8, LowerInclusive: true, UpperInclusive: true, Index: 2},
Style cleanup of all the changes in sparsehistogram so far A lot of this code was hacked together, literally during a hackathon. This commit intends not to change the code substantially, but just make the code obey the usual style practices. A (possibly incomplete) list of areas: * Generally address linter warnings. * The `pgk` directory is deprecated as per dev-summit. No new packages should be added to it. I moved the new `pkg/histogram` package to `model` anticipating what's proposed in #9478. * Make the naming of the Sparse Histogram more consistent. Including abbreviations, there were just too many names for it: SparseHistogram, Histogram, Histo, hist, his, shs, h. The idea is to call it "Histogram" in general. Only add "Sparse" if it is needed to avoid confusion with conventional Histograms (which is rare because the TSDB really has no notion of conventional Histograms). Use abbreviations only in local scope, and then really abbreviate (not just removing three out of seven letters like in "Histo"). This is in the spirit of https://github.com/golang/go/wiki/CodeReviewComments#variable-names * Several other minor name changes. * A lot of formatting of doc comments. For one, following https://github.com/golang/go/wiki/CodeReviewComments#comment-sentences , but also layout question, anticipating how things will look like when rendered by `godoc` (even where `godoc` doesn't render them right now because they are for unexported types or not a doc comment at all but just a normal code comment - consistency is queen!). * Re-enabled `TestQueryLog` and `TestEndopints` (they pass now, leaving them disabled was presumably an oversight). * Bucket iterator for histogram.Histogram is now created with a method. * HistogramChunk.iterator now allows iterator recycling. (I think @dieterbe only commented it out because he was confused by the question in the comment.) * HistogramAppender.Append panics now because we decided to treat staleness marker differently. Signed-off-by: beorn7 <beorn@grafana.com>
2021-10-09 06:57:07 -07:00
},
},
}
for i, c := range cases {
t.Run(fmt.Sprintf("%d", i), func(t *testing.T) {
it := c.histogram.CumulativeBucketIterator()
actualBuckets := make([]Bucket[uint64], 0, len(c.expectedBuckets))
Style cleanup of all the changes in sparsehistogram so far A lot of this code was hacked together, literally during a hackathon. This commit intends not to change the code substantially, but just make the code obey the usual style practices. A (possibly incomplete) list of areas: * Generally address linter warnings. * The `pgk` directory is deprecated as per dev-summit. No new packages should be added to it. I moved the new `pkg/histogram` package to `model` anticipating what's proposed in #9478. * Make the naming of the Sparse Histogram more consistent. Including abbreviations, there were just too many names for it: SparseHistogram, Histogram, Histo, hist, his, shs, h. The idea is to call it "Histogram" in general. Only add "Sparse" if it is needed to avoid confusion with conventional Histograms (which is rare because the TSDB really has no notion of conventional Histograms). Use abbreviations only in local scope, and then really abbreviate (not just removing three out of seven letters like in "Histo"). This is in the spirit of https://github.com/golang/go/wiki/CodeReviewComments#variable-names * Several other minor name changes. * A lot of formatting of doc comments. For one, following https://github.com/golang/go/wiki/CodeReviewComments#comment-sentences , but also layout question, anticipating how things will look like when rendered by `godoc` (even where `godoc` doesn't render them right now because they are for unexported types or not a doc comment at all but just a normal code comment - consistency is queen!). * Re-enabled `TestQueryLog` and `TestEndopints` (they pass now, leaving them disabled was presumably an oversight). * Bucket iterator for histogram.Histogram is now created with a method. * HistogramChunk.iterator now allows iterator recycling. (I think @dieterbe only commented it out because he was confused by the question in the comment.) * HistogramAppender.Append panics now because we decided to treat staleness marker differently. Signed-off-by: beorn7 <beorn@grafana.com>
2021-10-09 06:57:07 -07:00
for it.Next() {
actualBuckets = append(actualBuckets, it.At())
}
require.Equal(t, c.expectedBuckets, actualBuckets)
})
}
}
func TestRegularBucketIterator(t *testing.T) {
cases := []struct {
histogram Histogram
expectedPositiveBuckets []Bucket[uint64]
expectedNegativeBuckets []Bucket[uint64]
}{
{
histogram: Histogram{
Schema: 0,
},
expectedPositiveBuckets: []Bucket[uint64]{},
expectedNegativeBuckets: []Bucket[uint64]{},
},
{
histogram: Histogram{
Schema: 0,
PositiveSpans: []Span{
{Offset: 0, Length: 2},
{Offset: 1, Length: 2},
},
PositiveBuckets: []int64{1, 1, -1, 0},
},
expectedPositiveBuckets: []Bucket[uint64]{
{Lower: 0.5, Upper: 1, Count: 1, LowerInclusive: false, UpperInclusive: true, Index: 0},
{Lower: 1, Upper: 2, Count: 2, LowerInclusive: false, UpperInclusive: true, Index: 1},
{Lower: 4, Upper: 8, Count: 1, LowerInclusive: false, UpperInclusive: true, Index: 3},
{Lower: 8, Upper: 16, Count: 1, LowerInclusive: false, UpperInclusive: true, Index: 4},
},
expectedNegativeBuckets: []Bucket[uint64]{},
},
{
histogram: Histogram{
Schema: 0,
NegativeSpans: []Span{
{Offset: 0, Length: 5},
{Offset: 1, Length: 1},
},
NegativeBuckets: []int64{1, 2, -2, 1, -1, 0},
},
expectedPositiveBuckets: []Bucket[uint64]{},
expectedNegativeBuckets: []Bucket[uint64]{
{Lower: -1, Upper: -0.5, Count: 1, LowerInclusive: true, UpperInclusive: false, Index: 0},
{Lower: -2, Upper: -1, Count: 3, LowerInclusive: true, UpperInclusive: false, Index: 1},
{Lower: -4, Upper: -2, Count: 1, LowerInclusive: true, UpperInclusive: false, Index: 2},
{Lower: -8, Upper: -4, Count: 2, LowerInclusive: true, UpperInclusive: false, Index: 3},
{Lower: -16, Upper: -8, Count: 1, LowerInclusive: true, UpperInclusive: false, Index: 4},
{Lower: -64, Upper: -32, Count: 1, LowerInclusive: true, UpperInclusive: false, Index: 6},
},
},
{
histogram: Histogram{
Schema: 0,
PositiveSpans: []Span{
{Offset: 0, Length: 4},
{Offset: 0, Length: 0},
{Offset: 0, Length: 3},
},
PositiveBuckets: []int64{1, 2, -2, 1, -1, 0, 0},
NegativeSpans: []Span{
{Offset: 0, Length: 5},
{Offset: 1, Length: 0},
{Offset: 0, Length: 1},
},
NegativeBuckets: []int64{1, 2, -2, 1, -1, 0},
},
expectedPositiveBuckets: []Bucket[uint64]{
{Lower: 0.5, Upper: 1, Count: 1, LowerInclusive: false, UpperInclusive: true, Index: 0},
{Lower: 1, Upper: 2, Count: 3, LowerInclusive: false, UpperInclusive: true, Index: 1},
{Lower: 2, Upper: 4, Count: 1, LowerInclusive: false, UpperInclusive: true, Index: 2},
{Lower: 4, Upper: 8, Count: 2, LowerInclusive: false, UpperInclusive: true, Index: 3},
{Lower: 8, Upper: 16, Count: 1, LowerInclusive: false, UpperInclusive: true, Index: 4},
{Lower: 16, Upper: 32, Count: 1, LowerInclusive: false, UpperInclusive: true, Index: 5},
{Lower: 32, Upper: 64, Count: 1, LowerInclusive: false, UpperInclusive: true, Index: 6},
},
expectedNegativeBuckets: []Bucket[uint64]{
{Lower: -1, Upper: -0.5, Count: 1, LowerInclusive: true, UpperInclusive: false, Index: 0},
{Lower: -2, Upper: -1, Count: 3, LowerInclusive: true, UpperInclusive: false, Index: 1},
{Lower: -4, Upper: -2, Count: 1, LowerInclusive: true, UpperInclusive: false, Index: 2},
{Lower: -8, Upper: -4, Count: 2, LowerInclusive: true, UpperInclusive: false, Index: 3},
{Lower: -16, Upper: -8, Count: 1, LowerInclusive: true, UpperInclusive: false, Index: 4},
{Lower: -64, Upper: -32, Count: 1, LowerInclusive: true, UpperInclusive: false, Index: 6},
},
},
{
histogram: Histogram{
Schema: 3,
PositiveSpans: []Span{
{Offset: -5, Length: 2}, // -5 -4
{Offset: 2, Length: 3}, // -1 0 1
{Offset: 2, Length: 2}, // 4 5
},
PositiveBuckets: []int64{1, 2, -2, 1, -1, 0, 3},
},
expectedPositiveBuckets: []Bucket[uint64]{
{Lower: 0.5946035575013605, Upper: 0.6484197773255048, Count: 1, LowerInclusive: false, UpperInclusive: true, Index: -5},
{Lower: 0.6484197773255048, Upper: 0.7071067811865475, Count: 3, LowerInclusive: false, UpperInclusive: true, Index: -4},
{Lower: 0.8408964152537144, Upper: 0.9170040432046711, Count: 1, LowerInclusive: false, UpperInclusive: true, Index: -1},
{Lower: 0.9170040432046711, Upper: 1, Count: 2, LowerInclusive: false, UpperInclusive: true, Index: 0},
{Lower: 1, Upper: 1.0905077326652577, Count: 1, LowerInclusive: false, UpperInclusive: true, Index: 1},
{Lower: 1.2968395546510096, Upper: 1.414213562373095, Count: 1, LowerInclusive: false, UpperInclusive: true, Index: 4},
{Lower: 1.414213562373095, Upper: 1.5422108254079407, Count: 4, LowerInclusive: false, UpperInclusive: true, Index: 5},
},
expectedNegativeBuckets: []Bucket[uint64]{},
},
{
histogram: Histogram{
Schema: -2,
PositiveSpans: []Span{
{Offset: -2, Length: 4}, // -2 -1 0 1
{Offset: 2, Length: 2}, // 4 5
},
PositiveBuckets: []int64{1, 2, -2, 1, -1, 0},
},
expectedPositiveBuckets: []Bucket[uint64]{
{Lower: 0.000244140625, Upper: 0.00390625, Count: 1, LowerInclusive: false, UpperInclusive: true, Index: -2},
{Lower: 0.00390625, Upper: 0.0625, Count: 3, LowerInclusive: false, UpperInclusive: true, Index: -1},
{Lower: 0.0625, Upper: 1, Count: 1, LowerInclusive: false, UpperInclusive: true, Index: 0},
{Lower: 1, Upper: 16, Count: 2, LowerInclusive: false, UpperInclusive: true, Index: 1},
{Lower: 4096, Upper: 65536, Count: 1, LowerInclusive: false, UpperInclusive: true, Index: 4},
{Lower: 65536, Upper: 1048576, Count: 1, LowerInclusive: false, UpperInclusive: true, Index: 5},
},
expectedNegativeBuckets: []Bucket[uint64]{},
},
{
histogram: Histogram{
Schema: -1,
PositiveSpans: []Span{
{Offset: -2, Length: 5}, // -2 -1 0 1 2
},
PositiveBuckets: []int64{1, 2, -2, 1, -1},
},
expectedPositiveBuckets: []Bucket[uint64]{
{Lower: 0.015625, Upper: 0.0625, Count: 1, LowerInclusive: false, UpperInclusive: true, Index: -2},
{Lower: 0.0625, Upper: 0.25, Count: 3, LowerInclusive: false, UpperInclusive: true, Index: -1},
{Lower: 0.25, Upper: 1, Count: 1, LowerInclusive: false, UpperInclusive: true, Index: 0},
{Lower: 1, Upper: 4, Count: 2, LowerInclusive: false, UpperInclusive: true, Index: 1},
{Lower: 4, Upper: 16, Count: 1, LowerInclusive: false, UpperInclusive: true, Index: 2},
},
expectedNegativeBuckets: []Bucket[uint64]{},
},
}
for i, c := range cases {
t.Run(fmt.Sprintf("%d", i), func(t *testing.T) {
it := c.histogram.PositiveBucketIterator()
actualPositiveBuckets := make([]Bucket[uint64], 0, len(c.expectedPositiveBuckets))
for it.Next() {
actualPositiveBuckets = append(actualPositiveBuckets, it.At())
}
require.Equal(t, c.expectedPositiveBuckets, actualPositiveBuckets)
it = c.histogram.NegativeBucketIterator()
actualNegativeBuckets := make([]Bucket[uint64], 0, len(c.expectedNegativeBuckets))
for it.Next() {
actualNegativeBuckets = append(actualNegativeBuckets, it.At())
}
require.Equal(t, c.expectedNegativeBuckets, actualNegativeBuckets)
Style cleanup of all the changes in sparsehistogram so far A lot of this code was hacked together, literally during a hackathon. This commit intends not to change the code substantially, but just make the code obey the usual style practices. A (possibly incomplete) list of areas: * Generally address linter warnings. * The `pgk` directory is deprecated as per dev-summit. No new packages should be added to it. I moved the new `pkg/histogram` package to `model` anticipating what's proposed in #9478. * Make the naming of the Sparse Histogram more consistent. Including abbreviations, there were just too many names for it: SparseHistogram, Histogram, Histo, hist, his, shs, h. The idea is to call it "Histogram" in general. Only add "Sparse" if it is needed to avoid confusion with conventional Histograms (which is rare because the TSDB really has no notion of conventional Histograms). Use abbreviations only in local scope, and then really abbreviate (not just removing three out of seven letters like in "Histo"). This is in the spirit of https://github.com/golang/go/wiki/CodeReviewComments#variable-names * Several other minor name changes. * A lot of formatting of doc comments. For one, following https://github.com/golang/go/wiki/CodeReviewComments#comment-sentences , but also layout question, anticipating how things will look like when rendered by `godoc` (even where `godoc` doesn't render them right now because they are for unexported types or not a doc comment at all but just a normal code comment - consistency is queen!). * Re-enabled `TestQueryLog` and `TestEndopints` (they pass now, leaving them disabled was presumably an oversight). * Bucket iterator for histogram.Histogram is now created with a method. * HistogramChunk.iterator now allows iterator recycling. (I think @dieterbe only commented it out because he was confused by the question in the comment.) * HistogramAppender.Append panics now because we decided to treat staleness marker differently. Signed-off-by: beorn7 <beorn@grafana.com>
2021-10-09 06:57:07 -07:00
})
}
}
func TestHistogramToFloat(t *testing.T) {
h := Histogram{
Schema: 3,
Count: 61,
Sum: 2.7,
ZeroThreshold: 0.1,
ZeroCount: 42,
PositiveSpans: []Span{
{Offset: 0, Length: 4},
{Offset: 0, Length: 0},
{Offset: 0, Length: 3},
},
PositiveBuckets: []int64{1, 2, -2, 1, -1, 0, 0},
NegativeSpans: []Span{
{Offset: 0, Length: 5},
{Offset: 1, Length: 0},
{Offset: 0, Length: 1},
},
NegativeBuckets: []int64{1, 2, -2, 1, -1, 0},
}
fh := h.ToFloat()
require.Equal(t, h.String(), fh.String())
}
// TestHistogramMatches tests both Histogram and FloatHistogram.
func TestHistogramMatches(t *testing.T) {
h1 := Histogram{
Schema: 3,
Count: 61,
Sum: 2.7,
ZeroThreshold: 0.1,
ZeroCount: 42,
PositiveSpans: []Span{
{Offset: 0, Length: 4},
{Offset: 10, Length: 3},
},
PositiveBuckets: []int64{1, 2, -2, 1, -1, 0, 0},
NegativeSpans: []Span{
{Offset: 0, Length: 4},
{Offset: 10, Length: 3},
},
NegativeBuckets: []int64{1, 2, -2, 1, -1, 0, 0},
}
equals := func(h1, h2 Histogram) {
require.True(t, h1.Equals(&h2))
require.True(t, h2.Equals(&h1))
h1f, h2f := h1.ToFloat(), h2.ToFloat()
require.True(t, h1f.Equals(h2f))
require.True(t, h2f.Equals(h1f))
}
notEquals := func(h1, h2 Histogram) {
require.False(t, h1.Equals(&h2))
require.False(t, h2.Equals(&h1))
h1f, h2f := h1.ToFloat(), h2.ToFloat()
require.False(t, h1f.Equals(h2f))
require.False(t, h2f.Equals(h1f))
}
h2 := h1.Copy()
equals(h1, *h2)
// Changed spans but same layout.
h2.PositiveSpans = append(h2.PositiveSpans, Span{Offset: 5})
h2.NegativeSpans = append(h2.NegativeSpans, Span{Offset: 2})
equals(h1, *h2)
// Adding empty spans in between.
h2.PositiveSpans[1].Offset = 6
h2.PositiveSpans = []Span{
h2.PositiveSpans[0],
{Offset: 1},
{Offset: 3},
h2.PositiveSpans[1],
h2.PositiveSpans[2],
}
h2.NegativeSpans[1].Offset = 5
h2.NegativeSpans = []Span{
h2.NegativeSpans[0],
{Offset: 2},
{Offset: 3},
h2.NegativeSpans[1],
h2.NegativeSpans[2],
}
equals(h1, *h2)
// All mismatches.
notEquals(h1, Histogram{})
h2.Schema = 1
notEquals(h1, *h2)
h2 = h1.Copy()
h2.Count++
notEquals(h1, *h2)
h2 = h1.Copy()
h2.Sum++
notEquals(h1, *h2)
h2 = h1.Copy()
h2.ZeroThreshold++
notEquals(h1, *h2)
h2 = h1.Copy()
h2.ZeroCount++
notEquals(h1, *h2)
// Changing value of buckets.
h2 = h1.Copy()
h2.PositiveBuckets[len(h2.PositiveBuckets)-1]++
notEquals(h1, *h2)
h2 = h1.Copy()
h2.NegativeBuckets[len(h2.NegativeBuckets)-1]++
notEquals(h1, *h2)
// Changing bucket layout.
h2 = h1.Copy()
h2.PositiveSpans[1].Offset++
notEquals(h1, *h2)
h2 = h1.Copy()
h2.NegativeSpans[1].Offset++
notEquals(h1, *h2)
// Adding an empty bucket.
h2 = h1.Copy()
h2.PositiveSpans[0].Offset--
h2.PositiveSpans[0].Length++
h2.PositiveBuckets = append([]int64{0}, h2.PositiveBuckets...)
notEquals(h1, *h2)
h2 = h1.Copy()
h2.NegativeSpans[0].Offset--
h2.NegativeSpans[0].Length++
h2.NegativeBuckets = append([]int64{0}, h2.NegativeBuckets...)
notEquals(h1, *h2)
// Adding new bucket.
h2 = h1.Copy()
h2.PositiveSpans = append(h2.PositiveSpans, Span{
Offset: 1,
Length: 1,
})
h2.PositiveBuckets = append(h2.PositiveBuckets, 1)
notEquals(h1, *h2)
h2 = h1.Copy()
h2.NegativeSpans = append(h2.NegativeSpans, Span{
Offset: 1,
Length: 1,
})
h2.NegativeBuckets = append(h2.NegativeBuckets, 1)
notEquals(h1, *h2)
}
func TestHistogramCompact(t *testing.T) {
cases := []struct {
name string
in *Histogram
maxEmptyBuckets int
expected *Histogram
}{
{
"empty histogram",
&Histogram{},
0,
&Histogram{},
},
{
"nothing should happen",
&Histogram{
PositiveSpans: []Span{{-2, 1}, {2, 3}},
PositiveBuckets: []int64{1, 3, -3, 42},
NegativeSpans: []Span{{3, 2}, {3, 2}},
NegativeBuckets: []int64{5, 3, 1.234e5, 1000},
},
0,
&Histogram{
PositiveSpans: []Span{{-2, 1}, {2, 3}},
PositiveBuckets: []int64{1, 3, -3, 42},
NegativeSpans: []Span{{3, 2}, {3, 2}},
NegativeBuckets: []int64{5, 3, 1.234e5, 1000},
},
},
{
"eliminate zero offsets",
&Histogram{
PositiveSpans: []Span{{-2, 1}, {0, 3}, {0, 1}},
PositiveBuckets: []int64{1, 3, -3, 42, 3},
NegativeSpans: []Span{{0, 2}, {0, 2}, {2, 1}, {0, 1}},
NegativeBuckets: []int64{5, 3, 1.234e5, 1000, 3, 4},
},
0,
&Histogram{
PositiveSpans: []Span{{-2, 5}},
PositiveBuckets: []int64{1, 3, -3, 42, 3},
NegativeSpans: []Span{{0, 4}, {2, 2}},
NegativeBuckets: []int64{5, 3, 1.234e5, 1000, 3, 4},
},
},
{
"eliminate zero length",
&Histogram{
PositiveSpans: []Span{{-2, 2}, {2, 0}, {3, 3}},
PositiveBuckets: []int64{1, 3, -3, 42, 3},
NegativeSpans: []Span{{0, 2}, {0, 0}, {2, 0}, {1, 4}},
NegativeBuckets: []int64{5, 3, 1.234e5, 1000, 3, 4},
},
0,
&Histogram{
PositiveSpans: []Span{{-2, 2}, {5, 3}},
PositiveBuckets: []int64{1, 3, -3, 42, 3},
NegativeSpans: []Span{{0, 2}, {3, 4}},
NegativeBuckets: []int64{5, 3, 1.234e5, 1000, 3, 4},
},
},
{
"eliminate multiple zero length spans",
&Histogram{
PositiveSpans: []Span{{-2, 2}, {2, 0}, {2, 0}, {2, 0}, {3, 3}},
PositiveBuckets: []int64{1, 3, -3, 42, 3},
},
0,
&Histogram{
PositiveSpans: []Span{{-2, 2}, {9, 3}},
PositiveBuckets: []int64{1, 3, -3, 42, 3},
},
},
{
"cut empty buckets at start or end",
&Histogram{
PositiveSpans: []Span{{-4, 4}, {5, 3}},
PositiveBuckets: []int64{0, 0, 1, 3, -3, 42, 3},
NegativeSpans: []Span{{0, 2}, {3, 5}},
NegativeBuckets: []int64{5, 3, -4, -2, 3, 4, -9},
},
0,
&Histogram{
PositiveSpans: []Span{{-2, 2}, {5, 3}},
PositiveBuckets: []int64{1, 3, -3, 42, 3},
NegativeSpans: []Span{{0, 2}, {3, 4}},
NegativeBuckets: []int64{5, 3, -4, -2, 3, 4},
},
},
{
"cut empty buckets at start and end",
&Histogram{
PositiveSpans: []Span{{-4, 4}, {5, 6}},
PositiveBuckets: []int64{0, 0, 1, 3, -3, 42, 3, -46, 0, 0},
NegativeSpans: []Span{{-2, 4}, {3, 5}},
NegativeBuckets: []int64{0, 0, 5, 3, -4, -2, 3, 4, -9},
},
0,
&Histogram{
PositiveSpans: []Span{{-2, 2}, {5, 3}},
PositiveBuckets: []int64{1, 3, -3, 42, 3},
NegativeSpans: []Span{{0, 2}, {3, 4}},
NegativeBuckets: []int64{5, 3, -4, -2, 3, 4},
},
},
{
"cut empty buckets at start or end of spans, even in the middle",
&Histogram{
PositiveSpans: []Span{{-4, 6}, {3, 6}},
PositiveBuckets: []int64{0, 0, 1, 3, -4, 0, 1, 42, 3, -46, 0, 0},
NegativeSpans: []Span{{0, 2}, {2, 6}},
NegativeBuckets: []int64{5, 3, -8, 4, -2, 3, 4, -9},
},
0,
&Histogram{
PositiveSpans: []Span{{-2, 2}, {5, 3}},
PositiveBuckets: []int64{1, 3, -3, 42, 3},
NegativeSpans: []Span{{0, 2}, {3, 4}},
NegativeBuckets: []int64{5, 3, -4, -2, 3, 4},
},
},
{
"cut empty buckets at start or end but merge spans due to maxEmptyBuckets",
&Histogram{
PositiveSpans: []Span{{-4, 4}, {5, 3}},
PositiveBuckets: []int64{0, 0, 1, 3, -3, 42, 3},
NegativeSpans: []Span{{0, 2}, {3, 5}},
NegativeBuckets: []int64{5, 3, -4, -2, 3, 4, -9},
},
10,
&Histogram{
PositiveSpans: []Span{{-2, 10}},
PositiveBuckets: []int64{1, 3, -4, 0, 0, 0, 0, 1, 42, 3},
NegativeSpans: []Span{{0, 9}},
NegativeBuckets: []int64{5, 3, -8, 0, 0, 4, -2, 3, 4},
},
},
{
"cut empty buckets from the middle of a span",
&Histogram{
PositiveSpans: []Span{{-4, 6}, {3, 3}},
PositiveBuckets: []int64{0, 0, 1, -1, 0, 3, -2, 42, 3},
NegativeSpans: []Span{{0, 2}, {3, 5}},
NegativeBuckets: []int64{5, 3, -4, -2, -2, 3, 4},
},
0,
&Histogram{
PositiveSpans: []Span{{-2, 1}, {2, 1}, {3, 3}},
PositiveBuckets: []int64{1, 2, -2, 42, 3},
NegativeSpans: []Span{{0, 2}, {3, 2}, {1, 2}},
NegativeBuckets: []int64{5, 3, -4, -2, 1, 4},
},
},
{
"cut out a span containing only empty buckets",
&Histogram{
PositiveSpans: []Span{{-4, 3}, {2, 2}, {3, 4}},
PositiveBuckets: []int64{0, 0, 1, -1, 0, 3, -2, 42, 3},
},
0,
&Histogram{
PositiveSpans: []Span{{-2, 1}, {7, 4}},
PositiveBuckets: []int64{1, 2, -2, 42, 3},
},
},
{
"cut empty buckets from the middle of a span, avoiding some due to maxEmptyBuckets",
&Histogram{
PositiveSpans: []Span{{-4, 6}, {3, 3}},
PositiveBuckets: []int64{0, 0, 1, -1, 0, 3, -2, 42, 3},
NegativeSpans: []Span{{0, 2}, {3, 5}},
NegativeBuckets: []int64{5, 3, -4, -2, -2, 3, 4},
},
1,
&Histogram{
PositiveSpans: []Span{{-2, 1}, {2, 1}, {3, 3}},
PositiveBuckets: []int64{1, 2, -2, 42, 3},
NegativeSpans: []Span{{0, 2}, {3, 5}},
NegativeBuckets: []int64{5, 3, -4, -2, -2, 3, 4},
},
},
{
"avoiding all cutting of empty buckets from the middle of a chunk due to maxEmptyBuckets",
&Histogram{
PositiveSpans: []Span{{-4, 6}, {3, 3}},
PositiveBuckets: []int64{0, 0, 1, -1, 0, 3, -2, 42, 3},
NegativeSpans: []Span{{0, 2}, {3, 5}},
NegativeBuckets: []int64{5, 3, -4, -2, -2, 3, 4},
},
2,
&Histogram{
PositiveSpans: []Span{{-2, 4}, {3, 3}},
PositiveBuckets: []int64{1, -1, 0, 3, -2, 42, 3},
NegativeSpans: []Span{{0, 2}, {3, 5}},
NegativeBuckets: []int64{5, 3, -4, -2, -2, 3, 4},
},
},
{
"everything merged into one span due to maxEmptyBuckets",
&Histogram{
PositiveSpans: []Span{{-4, 6}, {3, 3}},
PositiveBuckets: []int64{0, 0, 1, -1, 0, 3, -2, 42, 3},
NegativeSpans: []Span{{0, 2}, {3, 5}},
NegativeBuckets: []int64{5, 3, -4, -2, -2, 3, 4},
},
3,
&Histogram{
PositiveSpans: []Span{{-2, 10}},
PositiveBuckets: []int64{1, -1, 0, 3, -3, 0, 0, 1, 42, 3},
NegativeSpans: []Span{{0, 10}},
NegativeBuckets: []int64{5, 3, -8, 0, 0, 4, -2, -2, 3, 4},
},
},
{
"only empty buckets and maxEmptyBuckets greater zero",
&Histogram{
PositiveSpans: []Span{{-4, 6}, {3, 3}},
PositiveBuckets: []int64{0, 0, 0, 0, 0, 0, 0, 0, 0},
NegativeSpans: []Span{{0, 7}},
NegativeBuckets: []int64{0, 0, 0, 0, 0, 0, 0},
},
3,
&Histogram{
PositiveSpans: []Span{},
PositiveBuckets: []int64{},
NegativeSpans: []Span{},
NegativeBuckets: []int64{},
},
},
{
"multiple spans of only empty buckets",
&Histogram{
PositiveSpans: []Span{{-10, 2}, {2, 1}, {3, 3}},
PositiveBuckets: []int64{0, 0, 0, 0, 2, 3},
NegativeSpans: []Span{{-10, 2}, {2, 1}, {3, 3}},
NegativeBuckets: []int64{2, 3, -5, 0, 0, 0},
},
0,
&Histogram{
PositiveSpans: []Span{{-1, 2}},
PositiveBuckets: []int64{2, 3},
NegativeSpans: []Span{{-10, 2}},
NegativeBuckets: []int64{2, 3},
},
},
}
for _, c := range cases {
t.Run(c.name, func(t *testing.T) {
require.Equal(t, c.expected, c.in.Compact(c.maxEmptyBuckets))
// Compact has happened in-place, too.
require.Equal(t, c.expected, c.in)
})
}
}