prometheus/storage/fanout.go

234 lines
6.5 KiB
Go
Raw Normal View History

2017-05-10 02:44:13 -07:00
// Copyright 2017 The Prometheus Authors
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
2017-05-10 02:44:13 -07:00
package storage
import (
"context"
2017-05-10 02:44:13 -07:00
"github.com/go-kit/log"
"github.com/go-kit/log/level"
"github.com/prometheus/common/model"
"github.com/prometheus/prometheus/model/exemplar"
Style cleanup of all the changes in sparsehistogram so far A lot of this code was hacked together, literally during a hackathon. This commit intends not to change the code substantially, but just make the code obey the usual style practices. A (possibly incomplete) list of areas: * Generally address linter warnings. * The `pgk` directory is deprecated as per dev-summit. No new packages should be added to it. I moved the new `pkg/histogram` package to `model` anticipating what's proposed in #9478. * Make the naming of the Sparse Histogram more consistent. Including abbreviations, there were just too many names for it: SparseHistogram, Histogram, Histo, hist, his, shs, h. The idea is to call it "Histogram" in general. Only add "Sparse" if it is needed to avoid confusion with conventional Histograms (which is rare because the TSDB really has no notion of conventional Histograms). Use abbreviations only in local scope, and then really abbreviate (not just removing three out of seven letters like in "Histo"). This is in the spirit of https://github.com/golang/go/wiki/CodeReviewComments#variable-names * Several other minor name changes. * A lot of formatting of doc comments. For one, following https://github.com/golang/go/wiki/CodeReviewComments#comment-sentences , but also layout question, anticipating how things will look like when rendered by `godoc` (even where `godoc` doesn't render them right now because they are for unexported types or not a doc comment at all but just a normal code comment - consistency is queen!). * Re-enabled `TestQueryLog` and `TestEndopints` (they pass now, leaving them disabled was presumably an oversight). * Bucket iterator for histogram.Histogram is now created with a method. * HistogramChunk.iterator now allows iterator recycling. (I think @dieterbe only commented it out because he was confused by the question in the comment.) * HistogramAppender.Append panics now because we decided to treat staleness marker differently. Signed-off-by: beorn7 <beorn@grafana.com>
2021-10-09 06:57:07 -07:00
"github.com/prometheus/prometheus/model/histogram"
"github.com/prometheus/prometheus/model/labels"
Introduce TSDB changes for appending metadata to the WAL (#10972) * Append metadata to the WAL Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Remove extra whitespace; Reword some docstrings and comments Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Use RLock() for hasNewMetadata check Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Use single byte for metric type in RefMetadata Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Update proposed WAL format for single-byte type metadata Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Implementa MetadataAppender interface for the Agent Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Address first round of review comments Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Amend description of metadata in wal.md Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Correct key used to retrieve metadata from cache When we're setting metadata entries in the scrapeCace, we're using the p.Help(), p.Unit(), p.Type() helpers, which retrieve the series name and use it as the cache key. When checking for cache entries though, we used p.Series() as the key, which included the metric name _with_ its labels. That meant that we were never actually hitting the cache. We're fixing this by utiling the __name__ internal label for correctly getting the cache entries after they've been set by setHelp(), setType() or setUnit(). Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Put feature behind a feature flag Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix AppendMetadata docstring Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Reorder WAL format document Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Change error message of AppendMetadata; Fix access of s.meta in AppendMetadata Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Reuse temporary buffer in Metadata encoder Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Only keep latest metadata for each refID during checkpointing Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix test that's referencing decoding metadata Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Avoid creating metadata block if no new metadata are present Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Add tests for corrupt metadata block and relevant record type Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix CR comments Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Extract logic about changing metadata in an anonymous function Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Implement new proposed WAL format and amend relevant tests Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Use 'const' for metadata field names Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Apply metadata to head memSeries in Commit, not in AppendMetadata Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Add docstring and rename extracted helper in scrape.go Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Add tests for tsdb-related cases Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix linter issues vol1 Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix linter issues vol2 Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix Windows test by closing WAL reader files Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Use switch instead of two if statements in metadata decoding Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix review comments around TestMetadata* tests Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Add code for replaying WAL; test correctness of in-memory data after a replay Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Remove scrape-loop related code from PR Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Address first round of comments Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Simplify tests by sorting slices before comparison Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix test to use separate transactions Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Empty out buffer and record slices after encoding latest metadata Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix linting issue Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Update calculation for DroppedMetadata metric Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Rename MetadataAppender interface and AppendMetadata method to MetadataUpdater/UpdateMetadata Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Reuse buffer when encoding latest metadata for each series Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix review comments; Check all returned error values using two helpers Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Simplify use of helpers Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Satisfy linter Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
2022-07-19 01:58:52 -07:00
"github.com/prometheus/prometheus/model/metadata"
storage: Added Chunks{Queryable/Querier/SeriesSet/Series/Iteratable. Added generic Merge{SeriesSet/Querier} implementation. (#7005) * storage: Added Chunks{Queryable/Querier/SeriesSet/Series/Iteratable. Added generic Merge{SeriesSet/Querier} implementation. ## Rationales: In many places (e.g. chunk Remote read, Thanos Receive fetching chunk from TSDB), we operate on encoded chunks not samples. This means that we unnecessary decode/encode, wasting CPU, time and memory. This PR adds chunk iterator interfaces and makes the merge code to be reused between both seriesSets I will make the use of it in following PR inside tsdb itself. For now fanout implements it and mergers. All merges now also allows passing series mergers. This opens doors for custom deduplications other than TSDB vertical ones (e.g. offline one we have in Thanos). ## Changes * Added Chunk versions of all iterating methods. It all starts in Querier/ChunkQuerier. The plan is that Storage will implement both chunked and samples. * Added Seek to chunks.Iterator interface for iterating over chunks. * NewMergeChunkQuerier was added; Both this and NewMergeQuerier are now using generigMergeQuerier to share the code. Generic code was added. * Improved tests. * Added some TODO for further simplifications in next PRs. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Addressed Brian's comments. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Moved s/Labeled/SeriesLabels as per Krasi suggestion. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Addressed Krasi's comments. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Second iteration of Krasi comments. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Another round of comments. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
2020-03-24 13:15:47 -07:00
tsdb_errors "github.com/prometheus/prometheus/tsdb/errors"
2017-05-10 02:44:13 -07:00
)
type fanout struct {
2017-08-11 11:45:52 -07:00
logger log.Logger
primary Storage
secondaries []Storage
2017-05-10 02:44:13 -07:00
}
*: Consistent Error/Warning handling for SeriesSet iterator: Allowing Async Select (#7251) * Add errors and Warnings to SeriesSet Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Change Querier interface and refactor accordingly Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Refactor promql/engine to propagate warnings at eval stage Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Address review issues Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Make sure all the series from all Selects are pre-advanced Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Address review issues Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Separate merge series sets Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Clean Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Refactor merge querier failure handling Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Refactored and simplified fanout with improvements from incoming chunk iterator PRs. * Secondary logic is hidden, instead of weird failed series set logic we had. * Fanout is well commented * Fanout closing record all errors * MergeQuerier improved API (clearer) * deferredGenericMergeSeriesSet is not needed as we return no samples anyway for failed series sets (next = false). Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Fix formatting Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Fix CI issues Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Added final tests for error handling. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Addressed Brian's comments. * Moved hints in populate to be allocated only when needed. * Used sync.Once in secondary Querier to achieve all-or-nothing partial response logic. * Select after first Next is done will panic. NOTE: in lazySeriesSet in theory we could just panic, I think however we can totally just return error, it will panic in expand anyway. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Utilize errWithWarnings Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Fix recently introduced expansion issue Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Add tests for secondary querier error handling Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Implement lazy merge Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Add name to test cases Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Reorganize Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Address review comments Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Address review comments Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Remove redundant warnings Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Fix rebase mistake Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com>
2020-06-09 09:57:31 -07:00
// NewFanout returns a new fanout Storage, which proxies reads and writes
2017-05-10 02:44:13 -07:00
// through to multiple underlying storages.
*: Consistent Error/Warning handling for SeriesSet iterator: Allowing Async Select (#7251) * Add errors and Warnings to SeriesSet Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Change Querier interface and refactor accordingly Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Refactor promql/engine to propagate warnings at eval stage Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Address review issues Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Make sure all the series from all Selects are pre-advanced Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Address review issues Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Separate merge series sets Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Clean Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Refactor merge querier failure handling Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Refactored and simplified fanout with improvements from incoming chunk iterator PRs. * Secondary logic is hidden, instead of weird failed series set logic we had. * Fanout is well commented * Fanout closing record all errors * MergeQuerier improved API (clearer) * deferredGenericMergeSeriesSet is not needed as we return no samples anyway for failed series sets (next = false). Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Fix formatting Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Fix CI issues Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Added final tests for error handling. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Addressed Brian's comments. * Moved hints in populate to be allocated only when needed. * Used sync.Once in secondary Querier to achieve all-or-nothing partial response logic. * Select after first Next is done will panic. NOTE: in lazySeriesSet in theory we could just panic, I think however we can totally just return error, it will panic in expand anyway. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Utilize errWithWarnings Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Fix recently introduced expansion issue Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Add tests for secondary querier error handling Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Implement lazy merge Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Add name to test cases Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Reorganize Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Address review comments Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Address review comments Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Remove redundant warnings Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Fix rebase mistake Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com>
2020-06-09 09:57:31 -07:00
//
// The difference between primary and secondary Storage is only for read (Querier) path and it goes as follows:
// * If the primary querier returns an error, then any of the Querier operations will fail.
// * If any secondary querier returns an error the result from that queries is discarded. The overall operation will succeed,
// and the error from the secondary querier will be returned as a warning.
//
// NOTE: In the case of Prometheus, it treats all remote storages as secondary / best effort.
2017-08-11 11:45:52 -07:00
func NewFanout(logger log.Logger, primary Storage, secondaries ...Storage) Storage {
2017-05-10 02:44:13 -07:00
return &fanout{
2017-08-11 11:45:52 -07:00
logger: logger,
primary: primary,
secondaries: secondaries,
2017-05-10 02:44:13 -07:00
}
}
// StartTime implements the Storage interface.
func (f *fanout) StartTime() (int64, error) {
// StartTime of a fanout should be the earliest StartTime of all its storages,
// both primary and secondaries.
firstTime, err := f.primary.StartTime()
if err != nil {
return int64(model.Latest), err
}
*: Consistent Error/Warning handling for SeriesSet iterator: Allowing Async Select (#7251) * Add errors and Warnings to SeriesSet Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Change Querier interface and refactor accordingly Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Refactor promql/engine to propagate warnings at eval stage Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Address review issues Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Make sure all the series from all Selects are pre-advanced Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Address review issues Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Separate merge series sets Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Clean Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Refactor merge querier failure handling Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Refactored and simplified fanout with improvements from incoming chunk iterator PRs. * Secondary logic is hidden, instead of weird failed series set logic we had. * Fanout is well commented * Fanout closing record all errors * MergeQuerier improved API (clearer) * deferredGenericMergeSeriesSet is not needed as we return no samples anyway for failed series sets (next = false). Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Fix formatting Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Fix CI issues Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Added final tests for error handling. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Addressed Brian's comments. * Moved hints in populate to be allocated only when needed. * Used sync.Once in secondary Querier to achieve all-or-nothing partial response logic. * Select after first Next is done will panic. NOTE: in lazySeriesSet in theory we could just panic, I think however we can totally just return error, it will panic in expand anyway. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Utilize errWithWarnings Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Fix recently introduced expansion issue Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Add tests for secondary querier error handling Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Implement lazy merge Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Add name to test cases Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Reorganize Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Address review comments Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Address review comments Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Remove redundant warnings Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Fix rebase mistake Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com>
2020-06-09 09:57:31 -07:00
for _, s := range f.secondaries {
t, err := s.StartTime()
if err != nil {
return int64(model.Latest), err
}
if t < firstTime {
firstTime = t
}
}
return firstTime, nil
}
func (f *fanout) Querier(mint, maxt int64) (Querier, error) {
primary, err := f.primary.Querier(mint, maxt)
if err != nil {
return nil, err
}
*: Consistent Error/Warning handling for SeriesSet iterator: Allowing Async Select (#7251) * Add errors and Warnings to SeriesSet Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Change Querier interface and refactor accordingly Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Refactor promql/engine to propagate warnings at eval stage Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Address review issues Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Make sure all the series from all Selects are pre-advanced Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Address review issues Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Separate merge series sets Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Clean Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Refactor merge querier failure handling Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Refactored and simplified fanout with improvements from incoming chunk iterator PRs. * Secondary logic is hidden, instead of weird failed series set logic we had. * Fanout is well commented * Fanout closing record all errors * MergeQuerier improved API (clearer) * deferredGenericMergeSeriesSet is not needed as we return no samples anyway for failed series sets (next = false). Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Fix formatting Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Fix CI issues Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Added final tests for error handling. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Addressed Brian's comments. * Moved hints in populate to be allocated only when needed. * Used sync.Once in secondary Querier to achieve all-or-nothing partial response logic. * Select after first Next is done will panic. NOTE: in lazySeriesSet in theory we could just panic, I think however we can totally just return error, it will panic in expand anyway. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Utilize errWithWarnings Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Fix recently introduced expansion issue Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Add tests for secondary querier error handling Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Implement lazy merge Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Add name to test cases Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Reorganize Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Address review comments Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Address review comments Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Remove redundant warnings Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Fix rebase mistake Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com>
2020-06-09 09:57:31 -07:00
secondaries := make([]Querier, 0, len(f.secondaries))
for _, storage := range f.secondaries {
querier, err := storage.Querier(mint, maxt)
2017-05-10 02:44:13 -07:00
if err != nil {
*: Consistent Error/Warning handling for SeriesSet iterator: Allowing Async Select (#7251) * Add errors and Warnings to SeriesSet Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Change Querier interface and refactor accordingly Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Refactor promql/engine to propagate warnings at eval stage Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Address review issues Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Make sure all the series from all Selects are pre-advanced Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Address review issues Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Separate merge series sets Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Clean Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Refactor merge querier failure handling Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Refactored and simplified fanout with improvements from incoming chunk iterator PRs. * Secondary logic is hidden, instead of weird failed series set logic we had. * Fanout is well commented * Fanout closing record all errors * MergeQuerier improved API (clearer) * deferredGenericMergeSeriesSet is not needed as we return no samples anyway for failed series sets (next = false). Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Fix formatting Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Fix CI issues Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Added final tests for error handling. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Addressed Brian's comments. * Moved hints in populate to be allocated only when needed. * Used sync.Once in secondary Querier to achieve all-or-nothing partial response logic. * Select after first Next is done will panic. NOTE: in lazySeriesSet in theory we could just panic, I think however we can totally just return error, it will panic in expand anyway. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Utilize errWithWarnings Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Fix recently introduced expansion issue Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Add tests for secondary querier error handling Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Implement lazy merge Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Add name to test cases Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Reorganize Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Address review comments Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Address review comments Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Remove redundant warnings Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Fix rebase mistake Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com>
2020-06-09 09:57:31 -07:00
// Close already open Queriers, append potential errors to returned error.
errs := tsdb_errors.NewMulti(err, primary.Close())
*: Consistent Error/Warning handling for SeriesSet iterator: Allowing Async Select (#7251) * Add errors and Warnings to SeriesSet Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Change Querier interface and refactor accordingly Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Refactor promql/engine to propagate warnings at eval stage Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Address review issues Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Make sure all the series from all Selects are pre-advanced Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Address review issues Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Separate merge series sets Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Clean Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Refactor merge querier failure handling Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Refactored and simplified fanout with improvements from incoming chunk iterator PRs. * Secondary logic is hidden, instead of weird failed series set logic we had. * Fanout is well commented * Fanout closing record all errors * MergeQuerier improved API (clearer) * deferredGenericMergeSeriesSet is not needed as we return no samples anyway for failed series sets (next = false). Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Fix formatting Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Fix CI issues Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Added final tests for error handling. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Addressed Brian's comments. * Moved hints in populate to be allocated only when needed. * Used sync.Once in secondary Querier to achieve all-or-nothing partial response logic. * Select after first Next is done will panic. NOTE: in lazySeriesSet in theory we could just panic, I think however we can totally just return error, it will panic in expand anyway. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Utilize errWithWarnings Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Fix recently introduced expansion issue Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Add tests for secondary querier error handling Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Implement lazy merge Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Add name to test cases Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Reorganize Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Address review comments Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Address review comments Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Remove redundant warnings Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Fix rebase mistake Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com>
2020-06-09 09:57:31 -07:00
for _, q := range secondaries {
errs.Add(q.Close())
storage: Added Chunks{Queryable/Querier/SeriesSet/Series/Iteratable. Added generic Merge{SeriesSet/Querier} implementation. (#7005) * storage: Added Chunks{Queryable/Querier/SeriesSet/Series/Iteratable. Added generic Merge{SeriesSet/Querier} implementation. ## Rationales: In many places (e.g. chunk Remote read, Thanos Receive fetching chunk from TSDB), we operate on encoded chunks not samples. This means that we unnecessary decode/encode, wasting CPU, time and memory. This PR adds chunk iterator interfaces and makes the merge code to be reused between both seriesSets I will make the use of it in following PR inside tsdb itself. For now fanout implements it and mergers. All merges now also allows passing series mergers. This opens doors for custom deduplications other than TSDB vertical ones (e.g. offline one we have in Thanos). ## Changes * Added Chunk versions of all iterating methods. It all starts in Querier/ChunkQuerier. The plan is that Storage will implement both chunked and samples. * Added Seek to chunks.Iterator interface for iterating over chunks. * NewMergeChunkQuerier was added; Both this and NewMergeQuerier are now using generigMergeQuerier to share the code. Generic code was added. * Improved tests. * Added some TODO for further simplifications in next PRs. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Addressed Brian's comments. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Moved s/Labeled/SeriesLabels as per Krasi suggestion. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Addressed Krasi's comments. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Second iteration of Krasi comments. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Another round of comments. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
2020-03-24 13:15:47 -07:00
}
*: Consistent Error/Warning handling for SeriesSet iterator: Allowing Async Select (#7251) * Add errors and Warnings to SeriesSet Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Change Querier interface and refactor accordingly Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Refactor promql/engine to propagate warnings at eval stage Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Address review issues Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Make sure all the series from all Selects are pre-advanced Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Address review issues Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Separate merge series sets Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Clean Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Refactor merge querier failure handling Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Refactored and simplified fanout with improvements from incoming chunk iterator PRs. * Secondary logic is hidden, instead of weird failed series set logic we had. * Fanout is well commented * Fanout closing record all errors * MergeQuerier improved API (clearer) * deferredGenericMergeSeriesSet is not needed as we return no samples anyway for failed series sets (next = false). Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Fix formatting Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Fix CI issues Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Added final tests for error handling. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Addressed Brian's comments. * Moved hints in populate to be allocated only when needed. * Used sync.Once in secondary Querier to achieve all-or-nothing partial response logic. * Select after first Next is done will panic. NOTE: in lazySeriesSet in theory we could just panic, I think however we can totally just return error, it will panic in expand anyway. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Utilize errWithWarnings Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Fix recently introduced expansion issue Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Add tests for secondary querier error handling Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Implement lazy merge Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Add name to test cases Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Reorganize Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Address review comments Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Address review comments Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Remove redundant warnings Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Fix rebase mistake Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com>
2020-06-09 09:57:31 -07:00
return nil, errs.Err()
2017-05-10 02:44:13 -07:00
}
*: Consistent Error/Warning handling for SeriesSet iterator: Allowing Async Select (#7251) * Add errors and Warnings to SeriesSet Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Change Querier interface and refactor accordingly Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Refactor promql/engine to propagate warnings at eval stage Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Address review issues Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Make sure all the series from all Selects are pre-advanced Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Address review issues Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Separate merge series sets Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Clean Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Refactor merge querier failure handling Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Refactored and simplified fanout with improvements from incoming chunk iterator PRs. * Secondary logic is hidden, instead of weird failed series set logic we had. * Fanout is well commented * Fanout closing record all errors * MergeQuerier improved API (clearer) * deferredGenericMergeSeriesSet is not needed as we return no samples anyway for failed series sets (next = false). Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Fix formatting Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Fix CI issues Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Added final tests for error handling. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Addressed Brian's comments. * Moved hints in populate to be allocated only when needed. * Used sync.Once in secondary Querier to achieve all-or-nothing partial response logic. * Select after first Next is done will panic. NOTE: in lazySeriesSet in theory we could just panic, I think however we can totally just return error, it will panic in expand anyway. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Utilize errWithWarnings Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Fix recently introduced expansion issue Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Add tests for secondary querier error handling Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Implement lazy merge Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Add name to test cases Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Reorganize Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Address review comments Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Address review comments Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Remove redundant warnings Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Fix rebase mistake Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com>
2020-06-09 09:57:31 -07:00
secondaries = append(secondaries, querier)
}
tsdb: Added ChunkQueryable implementations to db; unified MergeSeriesSets and vertical to single struct. (#7069) * tsdb: Added ChunkQueryable implementations to db; unified compactor, querier and fanout block iterating. Chained to https://github.com/prometheus/prometheus/pull/7059 * NewMerge(Chunk)Querier now takies multiple primaries allowing tsdb DB code to use it. * Added single SeriesEntry / ChunkEntry for all series implementations. * Unified all vertical, and non vertical for compact and querying to single merge series / chunk sets by reusing VerticalSeriesMergeFunc for overlapping algorithm (same logic as before) * Added block (Base/Chunk/)Querier for block querying. We then use populateAndTomb(Base/Chunk/) to iterate over chunks or samples. * Refactored endpoint tests and querier tests to include subtests. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Addressed comments from Brian and Beorn. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Fixed snapshot test and added chunk iterator support for DBReadOnly. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Fixed race when iterating over Ats first. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Fixed tests. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Fixed populate block tests. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Fixed endpoints test. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Fixed test. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Added test & fixed case of head open chunk. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Fixed DBReadOnly tests and bug producing 1 sample chunks. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Added cases for partial block overlap for multiple full chunks. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Added extra tests for chunk meta after compaction. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Fixed small vertical merge bug and added more tests for that. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
2020-07-31 08:03:02 -07:00
return NewMergeQuerier([]Querier{primary}, secondaries, ChainedSeriesMerge), nil
2017-05-10 02:44:13 -07:00
}
func (f *fanout) ChunkQuerier(mint, maxt int64) (ChunkQuerier, error) {
primary, err := f.primary.ChunkQuerier(mint, maxt)
if err != nil {
return nil, err
}
secondaries := make([]ChunkQuerier, 0, len(f.secondaries))
for _, storage := range f.secondaries {
querier, err := storage.ChunkQuerier(mint, maxt)
if err != nil {
// Close already open Queriers, append potential errors to returned error.
errs := tsdb_errors.NewMulti(err, primary.Close())
for _, q := range secondaries {
errs.Add(q.Close())
}
return nil, errs.Err()
}
secondaries = append(secondaries, querier)
}
tsdb: Added ChunkQueryable implementations to db; unified MergeSeriesSets and vertical to single struct. (#7069) * tsdb: Added ChunkQueryable implementations to db; unified compactor, querier and fanout block iterating. Chained to https://github.com/prometheus/prometheus/pull/7059 * NewMerge(Chunk)Querier now takies multiple primaries allowing tsdb DB code to use it. * Added single SeriesEntry / ChunkEntry for all series implementations. * Unified all vertical, and non vertical for compact and querying to single merge series / chunk sets by reusing VerticalSeriesMergeFunc for overlapping algorithm (same logic as before) * Added block (Base/Chunk/)Querier for block querying. We then use populateAndTomb(Base/Chunk/) to iterate over chunks or samples. * Refactored endpoint tests and querier tests to include subtests. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Addressed comments from Brian and Beorn. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Fixed snapshot test and added chunk iterator support for DBReadOnly. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Fixed race when iterating over Ats first. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Fixed tests. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Fixed populate block tests. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Fixed endpoints test. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Fixed test. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Added test & fixed case of head open chunk. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Fixed DBReadOnly tests and bug producing 1 sample chunks. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Added cases for partial block overlap for multiple full chunks. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Added extra tests for chunk meta after compaction. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Fixed small vertical merge bug and added more tests for that. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
2020-07-31 08:03:02 -07:00
return NewMergeChunkQuerier([]ChunkQuerier{primary}, secondaries, NewCompactingChunkSeriesMerger(ChainedSeriesMerge)), nil
}
func (f *fanout) Appender(ctx context.Context) Appender {
primary := f.primary.Appender(ctx)
secondaries := make([]Appender, 0, len(f.secondaries))
for _, storage := range f.secondaries {
secondaries = append(secondaries, storage.Appender(ctx))
2017-05-10 02:44:13 -07:00
}
return &fanoutAppender{
2017-08-11 11:45:52 -07:00
logger: f.logger,
primary: primary,
secondaries: secondaries,
}
2017-05-10 02:44:13 -07:00
}
// Close closes the storage and all its underlying resources.
func (f *fanout) Close() error {
errs := tsdb_errors.NewMulti(f.primary.Close())
*: Consistent Error/Warning handling for SeriesSet iterator: Allowing Async Select (#7251) * Add errors and Warnings to SeriesSet Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Change Querier interface and refactor accordingly Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Refactor promql/engine to propagate warnings at eval stage Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Address review issues Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Make sure all the series from all Selects are pre-advanced Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Address review issues Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Separate merge series sets Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Clean Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Refactor merge querier failure handling Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Refactored and simplified fanout with improvements from incoming chunk iterator PRs. * Secondary logic is hidden, instead of weird failed series set logic we had. * Fanout is well commented * Fanout closing record all errors * MergeQuerier improved API (clearer) * deferredGenericMergeSeriesSet is not needed as we return no samples anyway for failed series sets (next = false). Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Fix formatting Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Fix CI issues Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Added final tests for error handling. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Addressed Brian's comments. * Moved hints in populate to be allocated only when needed. * Used sync.Once in secondary Querier to achieve all-or-nothing partial response logic. * Select after first Next is done will panic. NOTE: in lazySeriesSet in theory we could just panic, I think however we can totally just return error, it will panic in expand anyway. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Utilize errWithWarnings Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Fix recently introduced expansion issue Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Add tests for secondary querier error handling Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Implement lazy merge Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Add name to test cases Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Reorganize Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Address review comments Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Address review comments Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Remove redundant warnings Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Fix rebase mistake Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com>
2020-06-09 09:57:31 -07:00
for _, s := range f.secondaries {
errs.Add(s.Close())
}
*: Consistent Error/Warning handling for SeriesSet iterator: Allowing Async Select (#7251) * Add errors and Warnings to SeriesSet Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Change Querier interface and refactor accordingly Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Refactor promql/engine to propagate warnings at eval stage Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Address review issues Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Make sure all the series from all Selects are pre-advanced Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Address review issues Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Separate merge series sets Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Clean Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Refactor merge querier failure handling Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Refactored and simplified fanout with improvements from incoming chunk iterator PRs. * Secondary logic is hidden, instead of weird failed series set logic we had. * Fanout is well commented * Fanout closing record all errors * MergeQuerier improved API (clearer) * deferredGenericMergeSeriesSet is not needed as we return no samples anyway for failed series sets (next = false). Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Fix formatting Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Fix CI issues Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Added final tests for error handling. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Addressed Brian's comments. * Moved hints in populate to be allocated only when needed. * Used sync.Once in secondary Querier to achieve all-or-nothing partial response logic. * Select after first Next is done will panic. NOTE: in lazySeriesSet in theory we could just panic, I think however we can totally just return error, it will panic in expand anyway. Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com> * Utilize errWithWarnings Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Fix recently introduced expansion issue Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Add tests for secondary querier error handling Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Implement lazy merge Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Add name to test cases Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Reorganize Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Address review comments Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Address review comments Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Remove redundant warnings Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> * Fix rebase mistake Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com> Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com>
2020-06-09 09:57:31 -07:00
return errs.Err()
2017-05-10 02:44:13 -07:00
}
// fanoutAppender implements Appender.
type fanoutAppender struct {
2017-08-11 11:45:52 -07:00
logger log.Logger
primary Appender
secondaries []Appender
2017-05-10 02:44:13 -07:00
}
func (f *fanoutAppender) Append(ref SeriesRef, l labels.Labels, t int64, v float64) (SeriesRef, error) {
ref, err := f.primary.Append(ref, l, t, v)
if err != nil {
return ref, err
}
for _, appender := range f.secondaries {
if _, err := appender.Append(ref, l, t, v); err != nil {
return 0, err
2017-05-10 02:44:13 -07:00
}
}
return ref, nil
2017-05-10 02:44:13 -07:00
}
func (f *fanoutAppender) AppendExemplar(ref SeriesRef, l labels.Labels, e exemplar.Exemplar) (SeriesRef, error) {
ref, err := f.primary.AppendExemplar(ref, l, e)
if err != nil {
return ref, err
}
for _, appender := range f.secondaries {
if _, err := appender.AppendExemplar(ref, l, e); err != nil {
return 0, err
}
}
return ref, nil
}
func (f *fanoutAppender) AppendHistogram(ref SeriesRef, l labels.Labels, t int64, h *histogram.Histogram, fh *histogram.FloatHistogram) (SeriesRef, error) {
ref, err := f.primary.AppendHistogram(ref, l, t, h, fh)
if err != nil {
return ref, err
}
for _, appender := range f.secondaries {
if _, err := appender.AppendHistogram(ref, l, t, h, fh); err != nil {
return 0, err
}
}
return ref, nil
}
Introduce TSDB changes for appending metadata to the WAL (#10972) * Append metadata to the WAL Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Remove extra whitespace; Reword some docstrings and comments Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Use RLock() for hasNewMetadata check Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Use single byte for metric type in RefMetadata Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Update proposed WAL format for single-byte type metadata Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Implementa MetadataAppender interface for the Agent Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Address first round of review comments Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Amend description of metadata in wal.md Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Correct key used to retrieve metadata from cache When we're setting metadata entries in the scrapeCace, we're using the p.Help(), p.Unit(), p.Type() helpers, which retrieve the series name and use it as the cache key. When checking for cache entries though, we used p.Series() as the key, which included the metric name _with_ its labels. That meant that we were never actually hitting the cache. We're fixing this by utiling the __name__ internal label for correctly getting the cache entries after they've been set by setHelp(), setType() or setUnit(). Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Put feature behind a feature flag Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix AppendMetadata docstring Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Reorder WAL format document Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Change error message of AppendMetadata; Fix access of s.meta in AppendMetadata Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Reuse temporary buffer in Metadata encoder Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Only keep latest metadata for each refID during checkpointing Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix test that's referencing decoding metadata Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Avoid creating metadata block if no new metadata are present Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Add tests for corrupt metadata block and relevant record type Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix CR comments Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Extract logic about changing metadata in an anonymous function Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Implement new proposed WAL format and amend relevant tests Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Use 'const' for metadata field names Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Apply metadata to head memSeries in Commit, not in AppendMetadata Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Add docstring and rename extracted helper in scrape.go Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Add tests for tsdb-related cases Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix linter issues vol1 Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix linter issues vol2 Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix Windows test by closing WAL reader files Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Use switch instead of two if statements in metadata decoding Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix review comments around TestMetadata* tests Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Add code for replaying WAL; test correctness of in-memory data after a replay Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Remove scrape-loop related code from PR Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Address first round of comments Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Simplify tests by sorting slices before comparison Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix test to use separate transactions Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Empty out buffer and record slices after encoding latest metadata Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix linting issue Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Update calculation for DroppedMetadata metric Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Rename MetadataAppender interface and AppendMetadata method to MetadataUpdater/UpdateMetadata Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Reuse buffer when encoding latest metadata for each series Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Fix review comments; Check all returned error values using two helpers Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Simplify use of helpers Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com> * Satisfy linter Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
2022-07-19 01:58:52 -07:00
func (f *fanoutAppender) UpdateMetadata(ref SeriesRef, l labels.Labels, m metadata.Metadata) (SeriesRef, error) {
ref, err := f.primary.UpdateMetadata(ref, l, m)
if err != nil {
return ref, err
}
for _, appender := range f.secondaries {
if _, err := appender.UpdateMetadata(ref, l, m); err != nil {
return 0, err
}
}
return ref, nil
}
func (f *fanoutAppender) Commit() (err error) {
err = f.primary.Commit()
for _, appender := range f.secondaries {
if err == nil {
err = appender.Commit()
} else {
if rollbackErr := appender.Rollback(); rollbackErr != nil {
2017-08-11 11:45:52 -07:00
level.Error(f.logger).Log("msg", "Squashed rollback error on commit", "err", rollbackErr)
}
2017-05-10 02:44:13 -07:00
}
}
return
2017-05-10 02:44:13 -07:00
}
func (f *fanoutAppender) Rollback() (err error) {
err = f.primary.Rollback()
for _, appender := range f.secondaries {
rollbackErr := appender.Rollback()
switch {
case err == nil:
err = rollbackErr
case rollbackErr != nil:
2017-08-11 11:45:52 -07:00
level.Error(f.logger).Log("msg", "Squashed rollback error on rollback", "err", rollbackErr)
2017-05-10 02:44:13 -07:00
}
}
return nil
}