prometheus/storage/remote/write.go

277 lines
7.6 KiB
Go
Raw Normal View History

2017-05-10 02:44:13 -07:00
// Copyright 2017 The Prometheus Authors
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
package remote
import (
"context"
"fmt"
Initial draft of prometheus-agent (#8785) * Initial draft of prometheus-agent This commit introduces a new binary, prometheus-agent, based on the Grafana Agent code. It runs a WAL-only version of prometheus without the TSDB, alerting, or rule evaluations. It is intended to be used to remote_write to Prometheus or another remote_write receiver. By default, prometheus-agent will listen on port 9095 to not collide with the prometheus default of 9090. Truncation of the WAL cooperates on a best-effort case with Remote Write. Every time the WAL is truncated, the minimum timestamp of data to truncate is determined by the lowest sent timestamp of all samples across all remote_write endpoints. This gives loose guarantees that data from the WAL will not try to be removed until the maximum sample lifetime passes or remote_write starts functionining. Signed-off-by: Robert Fratto <robertfratto@gmail.com> * add tests for Prometheus agent (#22) * add tests for Prometheus agent * add tests for Prometheus agent * rearranged tests as per the review comments * update tests for Agent * changes as per code review comments Signed-off-by: SriKrishna Paparaju <paparaju@gmail.com> * incremental changes to prometheus agent Signed-off-by: SriKrishna Paparaju <paparaju@gmail.com> * changes as per code review comments Signed-off-by: SriKrishna Paparaju <paparaju@gmail.com> * Commit feedback from code review Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com> Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com> Signed-off-by: Robert Fratto <robertfratto@gmail.com> * Port over some comments from grafana/agent Signed-off-by: Robert Fratto <robertfratto@gmail.com> * Rename agent.Storage to agent.DB for tsdb consistency Signed-off-by: Robert Fratto <robertfratto@gmail.com> * Consolidate agentMode ifs in cmd/prometheus/main.go Signed-off-by: Robert Fratto <robertfratto@gmail.com> * Document PreAction usage requirements better for agent mode flags Signed-off-by: Robert Fratto <robertfratto@gmail.com> * remove unnecessary defaultListenAddr Signed-off-by: Robert Fratto <robertfratto@gmail.com> * `go fmt ./tsdb/agent` and fix lint errors Signed-off-by: Robert Fratto <robertfratto@gmail.com> Co-authored-by: SriKrishna Paparaju <paparaju@gmail.com>
2021-10-29 08:25:05 -07:00
"math"
"sync"
"time"
"github.com/go-kit/log"
"github.com/prometheus/client_golang/prometheus"
"github.com/prometheus/client_golang/prometheus/promauto"
"github.com/prometheus/prometheus/config"
"github.com/prometheus/prometheus/pkg/exemplar"
2017-05-10 02:44:13 -07:00
"github.com/prometheus/prometheus/pkg/labels"
"github.com/prometheus/prometheus/storage"
"github.com/prometheus/prometheus/tsdb/wal"
2017-05-10 02:44:13 -07:00
)
var (
samplesIn = promauto.NewCounter(prometheus.CounterOpts{
Namespace: namespace,
Subsystem: subsystem,
Name: "samples_in_total",
Help: "Samples in to remote storage, compare to samples out for queue managers.",
})
Add Exemplar Remote Write support (#8296) * Write exemplars to the WAL and send them over remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Update example for exemplars, print data in a more obvious format. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add metrics for remote write of exemplars. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Fix incorrect slices passed to send in remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * We need to unregister the new metrics. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address review comments Signed-off-by: Callum Styan <callumstyan@gmail.com> * Order of exemplar append vs write exemplar to WAL needs to change. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Several fixes to prevent sending uninitialized or incorrect samples with an exemplar. Fix dropping exemplar for missing series. Add tests for queue_manager sending exemplars Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Store both samples and exemplars in the same timeseries buffer to remove the alloc when building final request, keep sub-slices in separate buffers for re-use Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Condense sample/exemplar delivery tests to parameterized sub-tests Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Rename test methods for clarity now that they also handle exemplars Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Rename counter variable. Fix instances where metrics were not updated correctly Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Add exemplars to LoadWAL benchmark Signed-off-by: Callum Styan <callumstyan@gmail.com> * last exemplars timestamp metric needs to convert value to seconds with ms precision Signed-off-by: Callum Styan <callumstyan@gmail.com> * Process exemplar records in a separate go routine when loading the WAL. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address review comments related to clarifying comments and variable names. Also refactor sample/exemplar to enqueue prompb types. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Regenerate types proto with comments, update protoc version again. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Put remote write of exemplars behind a feature flag. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address some of Ganesh's review comments. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Move exemplar remote write feature flag to a config file field. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address Bartek's review comments. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Don't allocate exemplar buffers in queue_manager if we're not going to send exemplars over remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add ValidateExemplar function, validate exemplars when appending to head and log them all to WAL before adding them to exemplar storage. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address more reivew comments from Ganesh. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add exemplar total label length check. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address a few last review comments Signed-off-by: Callum Styan <callumstyan@gmail.com> Co-authored-by: Martin Disibio <mdisibio@gmail.com>
2021-05-06 13:53:52 -07:00
exemplarsIn = promauto.NewCounter(prometheus.CounterOpts{
Namespace: namespace,
Subsystem: subsystem,
Name: "exemplars_in_total",
Help: "Exemplars in to remote storage, compare to exemplars out for queue managers.",
})
)
// WriteStorage represents all the remote write storage.
type WriteStorage struct {
logger log.Logger
reg prometheus.Registerer
mtx sync.Mutex
watcherMetrics *wal.WatcherMetrics
liveReaderMetrics *wal.LiveReaderMetrics
externalLabels labels.Labels
walDir string
queues map[string]*QueueManager
samplesIn *ewmaRate
flushDeadline time.Duration
interner *pool
scraper ReadyScrapeManager
// For timestampTracker.
highestTimestamp *maxTimestamp
}
// NewWriteStorage creates and runs a WriteStorage.
func NewWriteStorage(logger log.Logger, reg prometheus.Registerer, walDir string, flushDeadline time.Duration, sm ReadyScrapeManager) *WriteStorage {
if logger == nil {
logger = log.NewNopLogger()
}
rws := &WriteStorage{
queues: make(map[string]*QueueManager),
watcherMetrics: wal.NewWatcherMetrics(reg),
liveReaderMetrics: wal.NewLiveReaderMetrics(reg),
logger: logger,
reg: reg,
flushDeadline: flushDeadline,
samplesIn: newEWMARate(ewmaWeight, shardUpdateDuration),
walDir: walDir,
interner: newPool(),
scraper: sm,
highestTimestamp: &maxTimestamp{
Gauge: prometheus.NewGauge(prometheus.GaugeOpts{
Namespace: namespace,
Subsystem: subsystem,
Name: "highest_timestamp_in_seconds",
Help: "Highest timestamp that has come into the remote storage via the Appender interface, in seconds since epoch.",
}),
},
}
if reg != nil {
reg.MustRegister(rws.highestTimestamp)
}
go rws.run()
return rws
}
func (rws *WriteStorage) run() {
ticker := time.NewTicker(shardUpdateDuration)
defer ticker.Stop()
for range ticker.C {
rws.samplesIn.tick()
}
}
// ApplyConfig updates the state as the new config requires.
// Only stop & create queues which have changes.
func (rws *WriteStorage) ApplyConfig(conf *config.Config) error {
rws.mtx.Lock()
defer rws.mtx.Unlock()
// Remote write queues only need to change if the remote write config or
// external labels change.
externalLabelUnchanged := labels.Equal(conf.GlobalConfig.ExternalLabels, rws.externalLabels)
rws.externalLabels = conf.GlobalConfig.ExternalLabels
newQueues := make(map[string]*QueueManager)
newHashes := []string{}
for _, rwConf := range conf.RemoteWriteConfigs {
hash, err := toHash(rwConf)
if err != nil {
return err
}
// Don't allow duplicate remote write configs.
if _, ok := newQueues[hash]; ok {
return fmt.Errorf("duplicate remote write configs are not allowed, found duplicate for URL: %s", rwConf.URL)
}
// Set the queue name to the config hash if the user has not set
// a name in their remote write config so we can still differentiate
// between queues that have the same remote write endpoint.
name := hash[:6]
if rwConf.Name != "" {
name = rwConf.Name
}
c, err := NewWriteClient(name, &ClientConfig{
URL: rwConf.URL,
Timeout: rwConf.RemoteTimeout,
HTTPClientConfig: rwConf.HTTPClientConfig,
SigV4Config: rwConf.SigV4Config,
Headers: rwConf.Headers,
RetryOnRateLimit: rwConf.QueueConfig.RetryOnRateLimit,
})
if err != nil {
return err
}
queue, ok := rws.queues[hash]
if externalLabelUnchanged && ok {
// Update the client in case any secret configuration has changed.
queue.SetClient(c)
newQueues[hash] = queue
delete(rws.queues, hash)
continue
}
// Redacted to remove any passwords in the URL (that are
// technically accepted but not recommended) since this is
// only used for metric labels.
endpoint := rwConf.URL.Redacted()
newQueues[hash] = NewQueueManager(
newQueueManagerMetrics(rws.reg, name, endpoint),
rws.watcherMetrics,
rws.liveReaderMetrics,
rws.logger,
rws.walDir,
rws.samplesIn,
rwConf.QueueConfig,
rwConf.MetadataConfig,
conf.GlobalConfig.ExternalLabels,
rwConf.WriteRelabelConfigs,
c,
rws.flushDeadline,
rws.interner,
rws.highestTimestamp,
rws.scraper,
Add Exemplar Remote Write support (#8296) * Write exemplars to the WAL and send them over remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Update example for exemplars, print data in a more obvious format. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add metrics for remote write of exemplars. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Fix incorrect slices passed to send in remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * We need to unregister the new metrics. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address review comments Signed-off-by: Callum Styan <callumstyan@gmail.com> * Order of exemplar append vs write exemplar to WAL needs to change. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Several fixes to prevent sending uninitialized or incorrect samples with an exemplar. Fix dropping exemplar for missing series. Add tests for queue_manager sending exemplars Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Store both samples and exemplars in the same timeseries buffer to remove the alloc when building final request, keep sub-slices in separate buffers for re-use Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Condense sample/exemplar delivery tests to parameterized sub-tests Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Rename test methods for clarity now that they also handle exemplars Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Rename counter variable. Fix instances where metrics were not updated correctly Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Add exemplars to LoadWAL benchmark Signed-off-by: Callum Styan <callumstyan@gmail.com> * last exemplars timestamp metric needs to convert value to seconds with ms precision Signed-off-by: Callum Styan <callumstyan@gmail.com> * Process exemplar records in a separate go routine when loading the WAL. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address review comments related to clarifying comments and variable names. Also refactor sample/exemplar to enqueue prompb types. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Regenerate types proto with comments, update protoc version again. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Put remote write of exemplars behind a feature flag. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address some of Ganesh's review comments. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Move exemplar remote write feature flag to a config file field. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address Bartek's review comments. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Don't allocate exemplar buffers in queue_manager if we're not going to send exemplars over remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add ValidateExemplar function, validate exemplars when appending to head and log them all to WAL before adding them to exemplar storage. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address more reivew comments from Ganesh. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add exemplar total label length check. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address a few last review comments Signed-off-by: Callum Styan <callumstyan@gmail.com> Co-authored-by: Martin Disibio <mdisibio@gmail.com>
2021-05-06 13:53:52 -07:00
rwConf.SendExemplars,
)
// Keep track of which queues are new so we know which to start.
newHashes = append(newHashes, hash)
}
// Anything remaining in rws.queues is a queue who's config has
// changed or was removed from the overall remote write config.
for _, q := range rws.queues {
q.Stop()
}
for _, hash := range newHashes {
newQueues[hash].Start()
}
rws.queues = newQueues
return nil
}
// Appender implements storage.Storage.
func (rws *WriteStorage) Appender(_ context.Context) storage.Appender {
return &timestampTracker{
writeStorage: rws,
highestRecvTimestamp: rws.highestTimestamp,
}
}
Initial draft of prometheus-agent (#8785) * Initial draft of prometheus-agent This commit introduces a new binary, prometheus-agent, based on the Grafana Agent code. It runs a WAL-only version of prometheus without the TSDB, alerting, or rule evaluations. It is intended to be used to remote_write to Prometheus or another remote_write receiver. By default, prometheus-agent will listen on port 9095 to not collide with the prometheus default of 9090. Truncation of the WAL cooperates on a best-effort case with Remote Write. Every time the WAL is truncated, the minimum timestamp of data to truncate is determined by the lowest sent timestamp of all samples across all remote_write endpoints. This gives loose guarantees that data from the WAL will not try to be removed until the maximum sample lifetime passes or remote_write starts functionining. Signed-off-by: Robert Fratto <robertfratto@gmail.com> * add tests for Prometheus agent (#22) * add tests for Prometheus agent * add tests for Prometheus agent * rearranged tests as per the review comments * update tests for Agent * changes as per code review comments Signed-off-by: SriKrishna Paparaju <paparaju@gmail.com> * incremental changes to prometheus agent Signed-off-by: SriKrishna Paparaju <paparaju@gmail.com> * changes as per code review comments Signed-off-by: SriKrishna Paparaju <paparaju@gmail.com> * Commit feedback from code review Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com> Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com> Signed-off-by: Robert Fratto <robertfratto@gmail.com> * Port over some comments from grafana/agent Signed-off-by: Robert Fratto <robertfratto@gmail.com> * Rename agent.Storage to agent.DB for tsdb consistency Signed-off-by: Robert Fratto <robertfratto@gmail.com> * Consolidate agentMode ifs in cmd/prometheus/main.go Signed-off-by: Robert Fratto <robertfratto@gmail.com> * Document PreAction usage requirements better for agent mode flags Signed-off-by: Robert Fratto <robertfratto@gmail.com> * remove unnecessary defaultListenAddr Signed-off-by: Robert Fratto <robertfratto@gmail.com> * `go fmt ./tsdb/agent` and fix lint errors Signed-off-by: Robert Fratto <robertfratto@gmail.com> Co-authored-by: SriKrishna Paparaju <paparaju@gmail.com>
2021-10-29 08:25:05 -07:00
// LowestSentTimestamp returns the lowest sent timestamp across all queues.
func (rws *WriteStorage) LowestSentTimestamp() int64 {
rws.mtx.Lock()
defer rws.mtx.Unlock()
var lowestTs int64 = math.MaxInt64
for _, q := range rws.queues {
ts := int64(q.metrics.highestSentTimestamp.Get() * 1000)
if ts < lowestTs {
lowestTs = ts
}
}
if len(rws.queues) == 0 {
lowestTs = 0
}
return lowestTs
}
// Close closes the WriteStorage.
func (rws *WriteStorage) Close() error {
rws.mtx.Lock()
defer rws.mtx.Unlock()
for _, q := range rws.queues {
q.Stop()
}
return nil
}
type timestampTracker struct {
writeStorage *WriteStorage
samples int64
Add Exemplar Remote Write support (#8296) * Write exemplars to the WAL and send them over remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Update example for exemplars, print data in a more obvious format. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add metrics for remote write of exemplars. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Fix incorrect slices passed to send in remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * We need to unregister the new metrics. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address review comments Signed-off-by: Callum Styan <callumstyan@gmail.com> * Order of exemplar append vs write exemplar to WAL needs to change. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Several fixes to prevent sending uninitialized or incorrect samples with an exemplar. Fix dropping exemplar for missing series. Add tests for queue_manager sending exemplars Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Store both samples and exemplars in the same timeseries buffer to remove the alloc when building final request, keep sub-slices in separate buffers for re-use Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Condense sample/exemplar delivery tests to parameterized sub-tests Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Rename test methods for clarity now that they also handle exemplars Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Rename counter variable. Fix instances where metrics were not updated correctly Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Add exemplars to LoadWAL benchmark Signed-off-by: Callum Styan <callumstyan@gmail.com> * last exemplars timestamp metric needs to convert value to seconds with ms precision Signed-off-by: Callum Styan <callumstyan@gmail.com> * Process exemplar records in a separate go routine when loading the WAL. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address review comments related to clarifying comments and variable names. Also refactor sample/exemplar to enqueue prompb types. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Regenerate types proto with comments, update protoc version again. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Put remote write of exemplars behind a feature flag. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address some of Ganesh's review comments. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Move exemplar remote write feature flag to a config file field. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address Bartek's review comments. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Don't allocate exemplar buffers in queue_manager if we're not going to send exemplars over remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add ValidateExemplar function, validate exemplars when appending to head and log them all to WAL before adding them to exemplar storage. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address more reivew comments from Ganesh. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add exemplar total label length check. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address a few last review comments Signed-off-by: Callum Styan <callumstyan@gmail.com> Co-authored-by: Martin Disibio <mdisibio@gmail.com>
2021-05-06 13:53:52 -07:00
exemplars int64
highestTimestamp int64
highestRecvTimestamp *maxTimestamp
2017-05-10 02:44:13 -07:00
}
// Append implements storage.Appender.
func (t *timestampTracker) Append(_ uint64, _ labels.Labels, ts int64, _ float64) (uint64, error) {
t.samples++
if ts > t.highestTimestamp {
t.highestTimestamp = ts
2017-05-10 02:44:13 -07:00
}
return 0, nil
2017-05-10 02:44:13 -07:00
}
func (t *timestampTracker) AppendExemplar(_ uint64, _ labels.Labels, _ exemplar.Exemplar) (uint64, error) {
Add Exemplar Remote Write support (#8296) * Write exemplars to the WAL and send them over remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Update example for exemplars, print data in a more obvious format. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add metrics for remote write of exemplars. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Fix incorrect slices passed to send in remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * We need to unregister the new metrics. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address review comments Signed-off-by: Callum Styan <callumstyan@gmail.com> * Order of exemplar append vs write exemplar to WAL needs to change. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Several fixes to prevent sending uninitialized or incorrect samples with an exemplar. Fix dropping exemplar for missing series. Add tests for queue_manager sending exemplars Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Store both samples and exemplars in the same timeseries buffer to remove the alloc when building final request, keep sub-slices in separate buffers for re-use Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Condense sample/exemplar delivery tests to parameterized sub-tests Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Rename test methods for clarity now that they also handle exemplars Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Rename counter variable. Fix instances where metrics were not updated correctly Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Add exemplars to LoadWAL benchmark Signed-off-by: Callum Styan <callumstyan@gmail.com> * last exemplars timestamp metric needs to convert value to seconds with ms precision Signed-off-by: Callum Styan <callumstyan@gmail.com> * Process exemplar records in a separate go routine when loading the WAL. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address review comments related to clarifying comments and variable names. Also refactor sample/exemplar to enqueue prompb types. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Regenerate types proto with comments, update protoc version again. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Put remote write of exemplars behind a feature flag. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address some of Ganesh's review comments. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Move exemplar remote write feature flag to a config file field. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address Bartek's review comments. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Don't allocate exemplar buffers in queue_manager if we're not going to send exemplars over remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add ValidateExemplar function, validate exemplars when appending to head and log them all to WAL before adding them to exemplar storage. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address more reivew comments from Ganesh. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add exemplar total label length check. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address a few last review comments Signed-off-by: Callum Styan <callumstyan@gmail.com> Co-authored-by: Martin Disibio <mdisibio@gmail.com>
2021-05-06 13:53:52 -07:00
t.exemplars++
return 0, nil
}
// Commit implements storage.Appender.
func (t *timestampTracker) Commit() error {
Add Exemplar Remote Write support (#8296) * Write exemplars to the WAL and send them over remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Update example for exemplars, print data in a more obvious format. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add metrics for remote write of exemplars. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Fix incorrect slices passed to send in remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * We need to unregister the new metrics. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address review comments Signed-off-by: Callum Styan <callumstyan@gmail.com> * Order of exemplar append vs write exemplar to WAL needs to change. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Several fixes to prevent sending uninitialized or incorrect samples with an exemplar. Fix dropping exemplar for missing series. Add tests for queue_manager sending exemplars Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Store both samples and exemplars in the same timeseries buffer to remove the alloc when building final request, keep sub-slices in separate buffers for re-use Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Condense sample/exemplar delivery tests to parameterized sub-tests Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Rename test methods for clarity now that they also handle exemplars Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Rename counter variable. Fix instances where metrics were not updated correctly Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Add exemplars to LoadWAL benchmark Signed-off-by: Callum Styan <callumstyan@gmail.com> * last exemplars timestamp metric needs to convert value to seconds with ms precision Signed-off-by: Callum Styan <callumstyan@gmail.com> * Process exemplar records in a separate go routine when loading the WAL. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address review comments related to clarifying comments and variable names. Also refactor sample/exemplar to enqueue prompb types. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Regenerate types proto with comments, update protoc version again. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Put remote write of exemplars behind a feature flag. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address some of Ganesh's review comments. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Move exemplar remote write feature flag to a config file field. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address Bartek's review comments. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Don't allocate exemplar buffers in queue_manager if we're not going to send exemplars over remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add ValidateExemplar function, validate exemplars when appending to head and log them all to WAL before adding them to exemplar storage. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address more reivew comments from Ganesh. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add exemplar total label length check. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address a few last review comments Signed-off-by: Callum Styan <callumstyan@gmail.com> Co-authored-by: Martin Disibio <mdisibio@gmail.com>
2021-05-06 13:53:52 -07:00
t.writeStorage.samplesIn.incr(t.samples + t.exemplars)
samplesIn.Add(float64(t.samples))
Add Exemplar Remote Write support (#8296) * Write exemplars to the WAL and send them over remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Update example for exemplars, print data in a more obvious format. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add metrics for remote write of exemplars. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Fix incorrect slices passed to send in remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * We need to unregister the new metrics. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address review comments Signed-off-by: Callum Styan <callumstyan@gmail.com> * Order of exemplar append vs write exemplar to WAL needs to change. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Several fixes to prevent sending uninitialized or incorrect samples with an exemplar. Fix dropping exemplar for missing series. Add tests for queue_manager sending exemplars Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Store both samples and exemplars in the same timeseries buffer to remove the alloc when building final request, keep sub-slices in separate buffers for re-use Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Condense sample/exemplar delivery tests to parameterized sub-tests Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Rename test methods for clarity now that they also handle exemplars Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Rename counter variable. Fix instances where metrics were not updated correctly Signed-off-by: Martin Disibio <mdisibio@gmail.com> * Add exemplars to LoadWAL benchmark Signed-off-by: Callum Styan <callumstyan@gmail.com> * last exemplars timestamp metric needs to convert value to seconds with ms precision Signed-off-by: Callum Styan <callumstyan@gmail.com> * Process exemplar records in a separate go routine when loading the WAL. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address review comments related to clarifying comments and variable names. Also refactor sample/exemplar to enqueue prompb types. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Regenerate types proto with comments, update protoc version again. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Put remote write of exemplars behind a feature flag. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address some of Ganesh's review comments. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Move exemplar remote write feature flag to a config file field. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address Bartek's review comments. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Don't allocate exemplar buffers in queue_manager if we're not going to send exemplars over remote write. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add ValidateExemplar function, validate exemplars when appending to head and log them all to WAL before adding them to exemplar storage. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address more reivew comments from Ganesh. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Add exemplar total label length check. Signed-off-by: Callum Styan <callumstyan@gmail.com> * Address a few last review comments Signed-off-by: Callum Styan <callumstyan@gmail.com> Co-authored-by: Martin Disibio <mdisibio@gmail.com>
2021-05-06 13:53:52 -07:00
exemplarsIn.Add(float64(t.exemplars))
t.highestRecvTimestamp.Set(float64(t.highestTimestamp / 1000))
2017-05-10 02:44:13 -07:00
return nil
}
// Rollback implements storage.Appender.
func (*timestampTracker) Rollback() error {
2017-05-10 02:44:13 -07:00
return nil
}