The previous code was defective in that it never sorted groups within a
file due to doing a multi-key sort incorrectly.
Signed-off-by: David Symonds <dsymonds@gmail.com>
* *: use latest release of staticcheck
It also fixes a couple of things in the code flagged by the additional
checks.
Signed-off-by: Simon Pasquier <spasquie@redhat.com>
* Use official release of staticcheck
Also run 'go list' before staticcheck to avoid failures when downloading packages.
Signed-off-by: Simon Pasquier <spasquie@redhat.com>
* Add evaluationTimestamp (Last Evaluation) column to display on /rules
Signed-off-by: Will Hegedus <wbhegedus@liberty.edu>
* Add lastScrapeDuration ("Scrape Duration") to display on /targets
Signed-off-by: Will Hegedus <wbhegedus@liberty.edu>
* Updates based on Julius' feedback
Signed-off-by: Will Hegedus <wbhegedus@liberty.edu>
* Update to set timestamp to when eval started (after eval completes)
Signed-off-by: Will Hegedus <wbhegedus@liberty.edu>
* Update /rules to display time since last evaluation
Signed-off-by: Will Hegedus <wbhegedus@liberty.edu>
* Re-order Last Eval/Eval Time to be consistent with targets page
Signed-off-by: Will Hegedus <wbhegedus@liberty.edu>
There are many more (mostly finalizers like Close/Stop/etc.), but most of
the others seemed like one couldn't do much about them anyway.
Signed-off-by: Julius Volz <julius.volz@gmail.com>
* adding information about the health and errors for Rules
adding Health() and LastError() to the Rule interface. This will allow
us to easily surface information about rules.
Signed-off-by: noqcks <benny@noqcks.io>
* updating rules.html with fields for Rule errors and health state
Signed-off-by: noqcks <benny@noqcks.io>
* fix code comment grammar & access Rule health/error info using a mutex
Signed-off-by: noqcks <benny@noqcks.io>
* s/Errors/Error/ in rules.html to remain consistent with targets.html
Signed-off-by: noqcks <benny@noqcks.io>
* adding periods to code comments in reporting/alerting
Signed-off-by: noqcks <benny@noqcks.io>
* putting health/error below mutex in struct field
Signed-off-by: noqcks <benny@noqcks.io>
Previously it would set no preconditions and check no postconditions,
as the `groups` member was empty.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
This adds a parameter to the storage selection interface which allows
query engine(s) to pass information about the operations surrounding a
data selection.
This can for example be used by remote storage backends to infer the
correct downsampling aggregates that need to be provided.
* Use testutil in rules subpackage
* Fix manager test
* Use testutil in rules subpackage
* Fix manager test
* Fix rebase
* Change to testutil for applyConfig tests
* Re-add contexts to storage.Storage.Querier()
These are needed when replacing the storage by a multi-tenant
implementation where the tenant is stored in the context.
The 1.x query interfaces already had contexts, but they got lost in 2.x.
* Convert promql.Engine to use native contexts
Clicking on a rule, either the name or the expression, opens the rule
result (or the corresponding expression, repsectively) in the
expression browser. This should by default happen in the console tab,
as, more often than not, displaying it in the graph tab runs into a
timeout.
* Move fingerprint to Hash()
* Move away from tsdb.MultiError
* 0777 -> 0666 for files
* checkOverflow of extra fields
Signed-off-by: Goutham Veeramachaneni <cs14btech11014@iith.ac.in>
Usually rules don't more around, and if they do it's likely
that rules/alerts with the same name stay in the same order.
If rules/alerts with the same name are added/removed this
could cause a blip for one cycle, but this is unavoidable
without requiring rule and alert names to be unique - which we don't
want to do.
In case the execution of all rules takes longer than the configured rule
evaluation interval, one or more iterations will be skipped. This needs
to be visible to the opterator.
This is based on https://github.com/prometheus/prometheus/pull/1997.
This adds contexts to the relevant Storage methods and already passes
PromQL's new per-query context into the storage's query methods.
The immediate motivation supporting multi-tenancy in Frankenstein, but
this could also be used by Prometheus's normal local storage to support
cancellations and timeouts at some point.
For Weaveworks' Frankenstein, we need to support multitenancy. In
Frankenstein, we initially solved this without modifying the promql
package at all: we constructed a new promql.Engine for every
query and injected a storage implementation into that engine which would
be primed to only collect data for a given user.
This is problematic to upstream, however. Prometheus assumes that there
is only one engine: the query concurrency gate is part of the engine,
and the engine contains one central cancellable context to shut down all
queries. Also, creating a new engine for every query seems like overkill.
Thus, we want to be able to pass per-query contexts into a single engine.
This change gets rid of the promql.Engine's built-in base context and
allows passing in a per-query context instead. Central cancellation of
all queries is still possible by deriving all passed-in contexts from
one central one, but this is now the responsibility of the caller. The
central query context is now created in main() and passed into the
relevant components (web handler / API, rule manager).
In a next step, the per-query context would have to be passed to the
storage implementation, so that the storage can implement multi-tenancy
or other features based on the contextual information.
These tests have been added after the /graph changes and therefore
already test the new syntax.
This commit has to be reverted together with the previous one to get
back to the old new state. *sigh*
So far, out-of-order samples during rule evaluation were not logged,
and neither scrape health samples. The latter are unlikely to cause
any errors. That's why I'm logging them always now. (It's alway highly
irregular should it happen.) For rules, I have used the same plumbing
as for samples, just with a different wording in the message to mark
them as a result of rule evaluation.
The chunk encoding was hardcoded there because it mostly doesn't
matter what encoding is chosen in that test. Since type 1 is
battle-hardened enough, I'm switching to type 2 here so that we can
catch unexpected problems as a byproduct. My expectation is that the
chunk encoding doesn't matter anyway, as said, but then "unexpected
problems" contains the word "unexpected".
This considers static labels in the equality of alerts to
avoid falsely copying state from a different alert definition with
the same name across reloads.
To be safe, it also copies the state map rather than just its pointer
so that remaining collisions disappear after one evaluation interval.
This gives up on the idea to communicate throuh the Append() call (by
either not returning as it is now or returning an error as
suggested/explored elsewhere). Here I have added a Throttled() call,
which has the advantage that it can be called before a whole _batch_
of Append()'s. Scrapes will happen completely or not at all. Same for
rule group evaluations. That's a highly desired behavior (as discussed
elsewhere). The code is even simpler now as the whole ingestion buffer
could be removed.
Logging of throttled mode has been streamlined and will create at most
one message per minute.
It's actually happening in several places (and for flags, we use the
standard Go time.Duration...). This at least reduces all our
home-grown parsing to one place (in model).
When an evaluation group runs initially, it waits a deterministic
amount of time. During that time it also has to accept
a termination singnal so shutdown doesn't hang during the first
evaluation iteration after a configuration reload.
Fixes#1307
This is with `golint -min_confidence=0.5`.
I left several lint warnings untouched because they were either
incorrect or I felt it was better not to change them at the moment.
This moves the concern of resolving the files relative to the config
file into the configuration loading itself.
It also fixes#921 which did not load the cert and token files relatively.
Besides fixing https://github.com/prometheus/prometheus/issues/805 by
making the entire externally reachable server URL configurable, this
adds tests for the "globalURL" template function and makes it easier to
test other such functions in the future.
This breaks the `web.Hostname` flag (and introduces `web.external-url`).
This flag is likely only used by few users, so I hope that's
justifiable.
Fixes https://github.com/prometheus/prometheus/issues/805
Changes to the UI:
- "Active Since" timestamps are now human-readable.
- Alerting rules are now pretty-printed better.
- Labels are no longer just strings, but alert bubbles (like we do on
the status page for base labels).
- Alert states and target health states are now capitalized in the
presentation layer rather than at the source.
This change is conceptually very simple, although the diff is large. It
switches logging from "github.com/golang/glog" to
"github.com/prometheus/log", while not actually changing any log
messages. V(1)-style logging has been changed to be log.Debug*().
With this commit, sending SIGHUP to the Prometheus process will reload
and apply the configuration file. The different components attempt
to handle failing changes gracefully.
This commits renames the RuleManager to Manager as the package
name is 'rules' now. The unused layer of abstraction of the
RuleManager interface is removed.
The one central sample ingestion channel has caused a variety of
trouble. This commit removes it. Targets and rule evaluation call an
Append method directly now. To incorporate multiple storage backends
(like OpenTSDB), storage.Tee forks the Append into two different
appenders.
Note that the tsdb queue manager had its own queue anyway. It was a
queue after a queue... Much queue, so overhead...
Targets have their own little buffer (implemented as a channel) to
avoid stalling during an http scrape. But a new scrape will only be
started once the old one is fully ingested.
The contraption of three pipelined ingesters was removed. A Target is
an ingester itself now. Despite more logic in Target, things should be
less confusing now.
Also, remove lint and vet warnings in ast.go.
Unary expressions cause parsing errors if they are done in the lexer
by tokenizing them into the number.
This fix moves unary expressions to the parser.
This commits implements the OR operation between two vectors.
Vector matching using the ON clause is added to limit the set of
labels that define a match between two elements. Group modifiers
(GROUP_LEFT/GROUP_RIGHT) to request many-to-one matching are added.
This adds support for scientific notation in the expression language, as
well as for all possible literal forms of +Inf/-Inf/NaN.
TODO: Keep enough state in the parser/lexer to distinguish contexts in
which "Inf", "NaN", etc. should be parsed as a number vs. parsed as a
label name. Currently, foo{nan="bar"} would be a syntax error. However,
that is an existing bug for all our reserved words. E.g. foo{sum="bar"}
is a syntax error as well. This should be fixed separately.
Since we are now getting really deep into floating point calculation,
the tests had to take into account the precision loss. Since the rule
tests are based on direct line matching in the output, implementing
the "almost equal" semantics was pretty cumbersome, but here we are.
This allows changing the time offset for individual instant and range
vectors in a query.
For example, this returns the value of `foo` 5 minutes in the past
relative to the current query evaluation time:
foo offset 5m
Note that the `offset` modifier always needs to follow the selector
immediately. I.e. the following would be correct:
sum(foo offset 5m) // GOOD.
While the following would be *incorrect*:
sum(foo) offset 5m // INVALID.
The same works for range vectors. This returns the 5-minutes-rate that
`foo` had a week ago:
rate(foo[5m] offset 1w)
This change touches the following components:
* Lexer/parser: additions to correctly parse the new `offset`/`OFFSET`
keyword.
* AST: vector and matrix nodes now have an additional `offset` field.
This is used during their evaluation to adjust query and result times
appropriately.
* Query analyzer: now works on separate sets of ranges and instants per
offset. Isolating different offsets from each other completely in this
way keeps the preloading code relatively simple.
No storage engine changes were needed by this change.
The rules tests have been changed to not probe the internal
implementation details of the query analyzer anymore (how many instants
and ranges have been preloaded). This would also become too cumbersome
to test with the new model, and measuring the result of the query should
be sufficient.
This fixes https://github.com/prometheus/prometheus/issues/529
This fixed https://github.com/prometheus/promdash/issues/201
