SD Managers take over responsibility for SD metrics registration
---------
Signed-off-by: Paulin Todev <paulin.todev@gmail.com>
Signed-off-by: Björn Rabenstein <github@rabenste.in>
Co-authored-by: Björn Rabenstein <github@rabenste.in>
* Testify: move to require
Moving testify to require to fail tests early in case of errors.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* More moves
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* Refactor test assertions
This pull request gets rid of assert.True where possible to use
fine-grained assertions.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* Implement go leak test for promql
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* Implement go leak test for Consul SD
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* Implement go leak test in discovery manager
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
use ?wait=10m will give results as fast as usual when data is changing
but will perform far less requests when services do not change.
On large infrastructure, this will reduce quite a lot the number of
qps on Consul servers while having the same performance for freshness
of results.
Signed-off-by: Pierre Souchay <p.souchay@criteo.com>
* adding additional unit tests for getDataCenter() in consul
Signed-off-by: Jean-Baptiste Le Duigou <jb.leduigou@gmail.com>
* Consult Tests : update comments to start with uppercase and end with point
Signed-off-by: Jean-Baptiste Le Duigou <jb.leduigou@gmail.com>
* Consult Test : using table-driven tests
Signed-off-by: Jean-Baptiste Le Duigou <jb.leduigou@gmail.com>
* Consul Test : cleaner syntax
Signed-off-by: Jean-Baptiste Le Duigou <jb.leduigou@gmail.com>
* Consul Test : even cleaner syntax
Signed-off-by: Jean-Baptiste Le Duigou <jb.leduigou@gmail.com>
* Consul Test : update comments
Signed-off-by: Jean-Baptiste Le Duigou <jb.leduigou@gmail.com>
* Fixing naming convention by removing underscore in function name
Signed-off-by: Jean-Baptiste Le Duigou <jb.leduigou@gmail.com>
* Removing duplicated test case for getDatacenter()
Signed-off-by: Jean-Baptiste Le Duigou <jb.leduigou@gmail.com>
See,
$ codespell -S './vendor/*,./.git*,./web/ui/static/vendor*' --ignore-words-list="uint,dur,ue,iff,te,wan"
Signed-off-by: Mario Trangoni <mjtrangoni@gmail.com>
* promql: Rewrote tests with testutil for functions_test
Signed-off-by: Elif T. Kuş <elifkus@gmail.com>
* pkg/relabel: Rewrote tests with testutil for relabel_test
Signed-off-by: Elif T. Kuş <elifkus@gmail.com>
* discovery/consul: Rewrote tests with testutil for consul_test
Signed-off-by: Elif T. Kuş <elifkus@gmail.com>
* scrape: Rewrote tests with testutil for manager_test
Signed-off-by: Elif T. Kuş <elifkus@gmail.com>
* consul: improve consul service discovery
Related to #3711
- Add the ability to filter by tag and node-meta in an efficient way (`/catalog/services`
allow filtering by node-meta, and returns a `map[string]string` or `service`->`tags`).
Tags and nore-meta are also used in `/catalog/service` requests.
- Do not require a call to the catalog if services are specified by name. This is important
because on large cluster `/catalog/services` changes all the time.
- Add `allow_stale` configuration option to do stale reads. Non-stale
reads can be costly, even more when you are doing them to a remote
datacenter with 10k+ targets over WAN (which is common for federation).
- Add `refresh_interval` to minimize the strain on the catalog and on the
service endpoint. This is needed because of that kind of behavior from
consul: https://github.com/hashicorp/consul/issues/3712 and because a catalog
on a large cluster would basically change *all* the time. No need to discover
targets in 1sec if we scrape them every minute.
- Added plenty of unit tests.
Benchmarks
----------
```yaml
scrape_configs:
- job_name: prometheus
scrape_interval: 60s
static_configs:
- targets: ["127.0.0.1:9090"]
- job_name: "observability-by-tag"
scrape_interval: "60s"
metrics_path: "/metrics"
consul_sd_configs:
- server: consul.service.par.consul.prod.crto.in:8500
tag: marathon-user-observability # Used in After
refresh_interval: 30s # Used in After+delay
relabel_configs:
- source_labels: [__meta_consul_tags]
regex: ^(.*,)?marathon-user-observability(,.*)?$
action: keep
- job_name: "observability-by-name"
scrape_interval: "60s"
metrics_path: "/metrics"
consul_sd_configs:
- server: consul.service.par.consul.prod.crto.in:8500
services:
- observability-cerebro
- observability-portal-web
- job_name: "fake-fake-fake"
scrape_interval: "15s"
metrics_path: "/metrics"
consul_sd_configs:
- server: consul.service.par.consul.prod.crto.in:8500
services:
- fake-fake-fake
```
Note: tested with ~1200 services, ~5000 nodes.
| Resource | Empty | Before | After | After + delay |
| -------- |:-----:|:------:|:-----:|:-------------:|
|/service-discovery size|5K|85MiB|27k|27k|27k|
|`go_memstats_heap_objects`|100k|1M|120k|110k|
|`go_memstats_heap_alloc_bytes`|24MB|150MB|28MB|27MB|
|`rate(go_memstats_alloc_bytes_total[5m])`|0.2MB/s|28MB/s|2MB/s|0.3MB/s|
|`rate(process_cpu_seconds_total[5m])`|0.1%|15%|2%|0.01%|
|`process_open_fds`|16|*1236*|22|22|
|`rate(prometheus_sd_consul_rpc_duration_seconds_count{call="services"}[5m])`|~0|1|1|*0.03*|
|`rate(prometheus_sd_consul_rpc_duration_seconds_count{call="service"}[5m])`|0.1|*80*|0.5|0.5|
|`prometheus_target_sync_length_seconds{quantile="0.9",scrape_job="observability-by-tag"}`|N/A|200ms|0.2ms|0.2ms|
|Network bandwidth|~10kbps|~2.8Mbps|~1.6Mbps|~10kbps|
Filtering by tag using relabel_configs uses **100kiB and 23kiB/s per service per job** and quite a lot of CPU. Also sends and additional *1Mbps* of traffic to consul.
Being a little bit smarter about this reduces the overhead quite a lot.
Limiting the number of `/catalog/services` queries per second almost removes the overhead of service discovery.
* consul: tweak `refresh_interval` behavior
`refresh_interval` now does what is advertised in the documentation,
there won't be more that one update per `refresh_interval`. It now
defaults to 30s (which was also the current waitTime in the consul query).
This also make sure we don't wait another 30s if we already waited 29s
in the blocking call by substracting the number of elapsed seconds.
Hopefully this will do what people expect it does and will be safer
for existing consul infrastructures.
* refactor: move targetGroup struct and CheckOverflow() to their own package
* refactor: move auth and security related structs to a utility package, fix import error in utility package
* refactor: Azure SD, remove SD struct from config
* refactor: DNS SD, remove SD struct from config into dns package
* refactor: ec2 SD, move SD struct from config into the ec2 package
* refactor: file SD, move SD struct from config to file discovery package
* refactor: gce, move SD struct from config to gce discovery package
* refactor: move HTTPClientConfig and URL into util/config, fix import error in httputil
* refactor: consul, move SD struct from config into consul discovery package
* refactor: marathon, move SD struct from config into marathon discovery package
* refactor: triton, move SD struct from config to triton discovery package, fix test
* refactor: zookeeper, move SD structs from config to zookeeper discovery package
* refactor: openstack, remove SD struct from config, move into openstack discovery package
* refactor: kubernetes, move SD struct from config into kubernetes discovery package
* refactor: notifier, use targetgroup package instead of config
* refactor: tests for file, marathon, triton SD - use targetgroup package instead of config.TargetGroup
* refactor: retrieval, use targetgroup package instead of config.TargetGroup
* refactor: storage, use config util package
* refactor: discovery manager, use targetgroup package instead of config.TargetGroup
* refactor: use HTTPClient and TLS config from configUtil instead of config
* refactor: tests, use targetgroup package instead of config.TargetGroup
* refactor: fix tagetgroup.Group pointers that were removed by mistake
* refactor: openstack, kubernetes: drop prefixes
* refactor: remove import aliases forced due to vscode bug
* refactor: move main SD struct out of config into discovery/config
* refactor: rename configUtil to config_util
* refactor: rename yamlUtil to yaml_config
* refactor: kubernetes, remove prefixes
* refactor: move the TargetGroup package to discovery/
* refactor: fix order of imports
