We are re-enabling HTTP 2 again. There has been a few bugfixes upstream
in go, and we have also enabled ReadIdleTimeout.
Fix#7588Fix#9068
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
This also fixes a bug in query_log_file, which now is relative to the config file like all other paths.
Signed-off-by: Andy Bursavich <abursavich@gmail.com>
use ?wait=10m will give results as fast as usual when data is changing
but will perform far less requests when services do not change.
On large infrastructure, this will reduce quite a lot the number of
qps on Consul servers while having the same performance for freshness
of results.
Signed-off-by: Pierre Souchay <p.souchay@criteo.com>
With the next release of client_golang, Summaries will not have
objectives by default. To not lose the objectives we have right now,
explicitly state the current default objectives.
Signed-off-by: beorn7 <beorn@grafana.com>
i) Uses the more idiomatic Wrap and Wrapf methods for creating nested errors.
ii) Fixes some incorrect usages of fmt.Errorf where the error messages don't have any formatting directives.
iii) Does away with the use of fmt package for errors in favour of pkg/errors
Signed-off-by: tariqibrahim <tariq181290@gmail.com>
* discovery: factorize for SD based on refresh
Signed-off-by: Simon Pasquier <spasquie@redhat.com>
* discovery: use common metrics for refresh
Signed-off-by: Simon Pasquier <spasquie@redhat.com>
* *: use latest release of staticcheck
It also fixes a couple of things in the code flagged by the additional
checks.
Signed-off-by: Simon Pasquier <spasquie@redhat.com>
* Use official release of staticcheck
Also run 'go list' before staticcheck to avoid failures when downloading packages.
Signed-off-by: Simon Pasquier <spasquie@redhat.com>
Especially for Kubernetes SD, this fixes a bug where the rendered
configuration says "api_server: null", which when read back is not
interpreted as an un-set API server (thus the default is not applied).
Signed-off-by: Julius Volz <julius.volz@gmail.com>
* consul: improve consul service discovery
Related to #3711
- Add the ability to filter by tag and node-meta in an efficient way (`/catalog/services`
allow filtering by node-meta, and returns a `map[string]string` or `service`->`tags`).
Tags and nore-meta are also used in `/catalog/service` requests.
- Do not require a call to the catalog if services are specified by name. This is important
because on large cluster `/catalog/services` changes all the time.
- Add `allow_stale` configuration option to do stale reads. Non-stale
reads can be costly, even more when you are doing them to a remote
datacenter with 10k+ targets over WAN (which is common for federation).
- Add `refresh_interval` to minimize the strain on the catalog and on the
service endpoint. This is needed because of that kind of behavior from
consul: https://github.com/hashicorp/consul/issues/3712 and because a catalog
on a large cluster would basically change *all* the time. No need to discover
targets in 1sec if we scrape them every minute.
- Added plenty of unit tests.
Benchmarks
----------
```yaml
scrape_configs:
- job_name: prometheus
scrape_interval: 60s
static_configs:
- targets: ["127.0.0.1:9090"]
- job_name: "observability-by-tag"
scrape_interval: "60s"
metrics_path: "/metrics"
consul_sd_configs:
- server: consul.service.par.consul.prod.crto.in:8500
tag: marathon-user-observability # Used in After
refresh_interval: 30s # Used in After+delay
relabel_configs:
- source_labels: [__meta_consul_tags]
regex: ^(.*,)?marathon-user-observability(,.*)?$
action: keep
- job_name: "observability-by-name"
scrape_interval: "60s"
metrics_path: "/metrics"
consul_sd_configs:
- server: consul.service.par.consul.prod.crto.in:8500
services:
- observability-cerebro
- observability-portal-web
- job_name: "fake-fake-fake"
scrape_interval: "15s"
metrics_path: "/metrics"
consul_sd_configs:
- server: consul.service.par.consul.prod.crto.in:8500
services:
- fake-fake-fake
```
Note: tested with ~1200 services, ~5000 nodes.
| Resource | Empty | Before | After | After + delay |
| -------- |:-----:|:------:|:-----:|:-------------:|
|/service-discovery size|5K|85MiB|27k|27k|27k|
|`go_memstats_heap_objects`|100k|1M|120k|110k|
|`go_memstats_heap_alloc_bytes`|24MB|150MB|28MB|27MB|
|`rate(go_memstats_alloc_bytes_total[5m])`|0.2MB/s|28MB/s|2MB/s|0.3MB/s|
|`rate(process_cpu_seconds_total[5m])`|0.1%|15%|2%|0.01%|
|`process_open_fds`|16|*1236*|22|22|
|`rate(prometheus_sd_consul_rpc_duration_seconds_count{call="services"}[5m])`|~0|1|1|*0.03*|
|`rate(prometheus_sd_consul_rpc_duration_seconds_count{call="service"}[5m])`|0.1|*80*|0.5|0.5|
|`prometheus_target_sync_length_seconds{quantile="0.9",scrape_job="observability-by-tag"}`|N/A|200ms|0.2ms|0.2ms|
|Network bandwidth|~10kbps|~2.8Mbps|~1.6Mbps|~10kbps|
Filtering by tag using relabel_configs uses **100kiB and 23kiB/s per service per job** and quite a lot of CPU. Also sends and additional *1Mbps* of traffic to consul.
Being a little bit smarter about this reduces the overhead quite a lot.
Limiting the number of `/catalog/services` queries per second almost removes the overhead of service discovery.
* consul: tweak `refresh_interval` behavior
`refresh_interval` now does what is advertised in the documentation,
there won't be more that one update per `refresh_interval`. It now
defaults to 30s (which was also the current waitTime in the consul query).
This also make sure we don't wait another 30s if we already waited 29s
in the blocking call by substracting the number of elapsed seconds.
Hopefully this will do what people expect it does and will be safer
for existing consul infrastructures.
* refactor: move targetGroup struct and CheckOverflow() to their own package
* refactor: move auth and security related structs to a utility package, fix import error in utility package
* refactor: Azure SD, remove SD struct from config
* refactor: DNS SD, remove SD struct from config into dns package
* refactor: ec2 SD, move SD struct from config into the ec2 package
* refactor: file SD, move SD struct from config to file discovery package
* refactor: gce, move SD struct from config to gce discovery package
* refactor: move HTTPClientConfig and URL into util/config, fix import error in httputil
* refactor: consul, move SD struct from config into consul discovery package
* refactor: marathon, move SD struct from config into marathon discovery package
* refactor: triton, move SD struct from config to triton discovery package, fix test
* refactor: zookeeper, move SD structs from config to zookeeper discovery package
* refactor: openstack, remove SD struct from config, move into openstack discovery package
* refactor: kubernetes, move SD struct from config into kubernetes discovery package
* refactor: notifier, use targetgroup package instead of config
* refactor: tests for file, marathon, triton SD - use targetgroup package instead of config.TargetGroup
* refactor: retrieval, use targetgroup package instead of config.TargetGroup
* refactor: storage, use config util package
* refactor: discovery manager, use targetgroup package instead of config.TargetGroup
* refactor: use HTTPClient and TLS config from configUtil instead of config
* refactor: tests, use targetgroup package instead of config.TargetGroup
* refactor: fix tagetgroup.Group pointers that were removed by mistake
* refactor: openstack, kubernetes: drop prefixes
* refactor: remove import aliases forced due to vscode bug
* refactor: move main SD struct out of config into discovery/config
* refactor: rename configUtil to config_util
* refactor: rename yamlUtil to yaml_config
* refactor: kubernetes, remove prefixes
* refactor: move the TargetGroup package to discovery/
* refactor: fix order of imports
