The `info` function is an experiment to improve UX
around including labels from info metrics.
`info` has to be enabled via the feature flag `--enable-feature=promql-experimental-functions`.
This MVP of info simplifies the implementation by assuming:
* Only support for the target_info metric
* That target_info's identifying labels are job and instance
Also:
* Encode info samples' original timestamp as sample value
* Deduce info series select hints from top-most VectorSelector
---------
Signed-off-by: Arve Knudsen <arve.knudsen@gmail.com>
Co-authored-by: Ying WANG <ying.wang@grafana.com>
Co-authored-by: Augustin Husson <augustin.husson@amadeus.com>
Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com>
Co-authored-by: Björn Rabenstein <github@rabenste.in>
Co-authored-by: Bryan Boreham <bjboreham@gmail.com>
These functions operate on whole series, not on samples, so they do not
fit into the table of functions that return a Vector. Remove the stub
entries that were left to help downstream users of the code identify
what changed.
We cannot remove the entries from the `FunctionCalls` map without
breaking `TestFunctionList`, so put some nils in to keep it happy.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Go's sorting functions can re-order equal elements, so the strategy of
sorting by the fallback ordering first does not always work.
Pulling the fallback into the main comparison function is more reliable
and more efficient.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Shortcut for `.*` matches newlines as well.
Add preamble change ^(?s:
Add test
dotAll flag por al regex
Add and fix regex tests
Signed-off-by: Mario Fernandez <mariofer@redhat.com>
PromQL engine: Delay deletion of __name__ label to the end of the query evaluation
- This change allows optionally preserving the `__name__` label via the `label_replace` and `label_join` functions, and helps prevent the dreaded "vector cannot contain metrics with the same labelset" error.
- The implementation extends the `Series` and `Sample` structs with a boolean flag indicating whether the `__name__` label should be deleted at the end of the query evaluation.
- The `label_replace` and `label_join` functions can still access the value of the `__name__` label, even if it has been previously marked for deletion. If `__name__` is used as target label, it won't be dropped at the end of the query evaluation.
- Fixes https://github.com/prometheus/prometheus/issues/11397
- See https://github.com/jcreixell/prometheus/pull/2 for previous discussion, including the decision to create this PR and benchmark it before considering other alternatives (like refactoring `labels.Labels`).
- See https://github.com/jcreixell/prometheus/pull/1 for an alternative implementation using a special label instead of boolean flags.
- Note: a feature flag `promql-delayed-name-removal` has been added as it changes the behavior of some "weird" queries (see https://github.com/prometheus/prometheus/issues/11397#issuecomment-1451998792)
Example (this always fails, as `__name__` is being dropped by `count_over_time`):
```
count_over_time({__name__!=""}[1m])
=> Error executing query: vector cannot contain metrics with the same labelset
```
Before:
```
label_replace(count_over_time({__name__!=""}[1m]), "__name__", "count_$1", "__name__", "(.+)")
=> Error executing query: vector cannot contain metrics with the same labelset
```
After:
```
label_replace(count_over_time({__name__!=""}[1m]), "__name__", "count_$1", "__name__", "(.+)")
=>
count_go_gc_cycles_automatic_gc_cycles_total{instance="localhost:9090", job="prometheus"} 1
count_go_gc_cycles_forced_gc_cycles_total{instance="localhost:9090", job="prometheus"} 1
...
```
Signed-off-by: Jorge Creixell <jcreixell@gmail.com>
---------
Signed-off-by: Jorge Creixell <jcreixell@gmail.com>
Signed-off-by: Björn Rabenstein <github@rabenste.in>
Same idea as for the avg aggregator before: Most of the time, there is
no overflow, so we don't have to revert to the more expensive and less
precise incremental calculation of the mean value.
Signed-off-by: beorn7 <beorn@grafana.com>
The calculation of the mean value in avg_over_time is performed in an
incremental fashion. This introduces additional numerical errors that
even Kahan summation cannot compensate, but at least we can use the
Kahan-corrected mean value when we use the intermediate mean value in
the calculation.
Signed-off-by: beorn7 <beorn@grafana.com>
This is a bit tough to explain, but I'll try:
`rate` & friends have a sophisticated extrapolation algorithm.
Usually, we extrapolate the result to the total interval specified in
the range selector. However, if the first sample within the range is
too far away from the beginning of the interval, or if the last sample
within the range is too far away from the end of the interval, we
assume the series has just started half a sampling interval before the
first sample or after the last sample, respectively, and shorten the
extrapolation interval correspondingly. We calculate the sampling
interval by looking at the average time between samples within the
range, and we define "too far away" as "more than 110% of that
sampling interval".
However, if this algorithm leads to an extrapolated starting value
that is negative, we limit the start of the extrapolation interval to
the point where the extrapolated starting value is zero.
At least that was the intention.
What we actually implemented is the following: If extrapolating all
the way to the beginning of the total interval would lead to an
extrapolated negative value, we would only extrapolate to the zero
point as above, even if the algorithm above would have selected a
starting point that is just half a sampling interval before the first
sample and that starting point would not have an extrapolated negative
value. In other word: What was meant as a _limitation_ of the
extrapolation interval yielded a _longer_ extrapolation interval in
this case.
There is an exception to the case just described: If the increase of
the extrapolation interval is more than 110% of the sampling interval,
we suddenly drop back to only extrapolate to half a sampling interval.
This behavior can be nicely seen in the testcounter_zero_cutoff test,
where the rate goes up all the way to 0.7 and then jumps back to 0.6.
This commit changes the behavior to what was (presumably) intended
from the beginning: The extension of the extrapolation interval is
only limited if actually needed to prevent extrapolation to negative
values, but the "limitation" never leads to _more_ extrapolation
anymore.
The difference is subtle, and probably it never bothered anyone.
However, if you calculate a rate of a classic histograms, the old
behavior might create non-monotonic histograms as a result (because of
the jumps you can see nicely in the old version of the
testcounter_zero_cutoff test). With this fix, that doesn't happen
anymore.
Signed-off-by: beorn7 <beorn@grafana.com>
* add custom buckets to native histogram model
* simple copy for custom bounds
* return errors for unsupported add/sub operations
* add test cases for string and update appendhistogram in scrape to account for new schema
* check fields which are supposed to be unused but may affect results in equals
* allow appending custom buckets histograms regardless of max schema
Signed-off-by: Jeanette Tan <jeanette.tan@grafana.com>
These functions act on the labels only, so don't need to go step by step
over the samples in a range query.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
The last_over_time retains a histogram sample without making a copy.
This sample is now coming from the buffered iterator used for windowing functions,
and can be reused for reading subsequent samples as the iterator progresses.
I would propose copying the sample in the last_over_time function, similar to
how it is done for rate, sum_over_time and others.
Signed-off-by: Filip Petkovski <filip.petkovsky@gmail.com>
This function is called very frequently when executing PromQL functions,
and we can do it much more efficiently inside Labels.
In the common case that `__name__` comes first in the labels, we simply
re-point to start at the next label, which is nearly free.
`DropMetricName` is now so cheap I removed the cache - benchmarks show
everything still goes faster.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
