* Initial draft of prometheus-agent
This commit introduces a new binary, prometheus-agent, based on the
Grafana Agent code. It runs a WAL-only version of prometheus without the
TSDB, alerting, or rule evaluations. It is intended to be used to
remote_write to Prometheus or another remote_write receiver.
By default, prometheus-agent will listen on port 9095 to not collide
with the prometheus default of 9090.
Truncation of the WAL cooperates on a best-effort case with Remote
Write. Every time the WAL is truncated, the minimum timestamp of data to
truncate is determined by the lowest sent timestamp of all samples
across all remote_write endpoints. This gives loose guarantees that data
from the WAL will not try to be removed until the maximum sample
lifetime passes or remote_write starts functionining.
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* add tests for Prometheus agent (#22)
* add tests for Prometheus agent
* add tests for Prometheus agent
* rearranged tests as per the review comments
* update tests for Agent
* changes as per code review comments
Signed-off-by: SriKrishna Paparaju <paparaju@gmail.com>
* incremental changes to prometheus agent
Signed-off-by: SriKrishna Paparaju <paparaju@gmail.com>
* changes as per code review comments
Signed-off-by: SriKrishna Paparaju <paparaju@gmail.com>
* Commit feedback from code review
Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com>
Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* Port over some comments from grafana/agent
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* Rename agent.Storage to agent.DB for tsdb consistency
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* Consolidate agentMode ifs in cmd/prometheus/main.go
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* Document PreAction usage requirements better for agent mode flags
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* remove unnecessary defaultListenAddr
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* `go fmt ./tsdb/agent` and fix lint errors
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
Co-authored-by: SriKrishna Paparaju <paparaju@gmail.com>
* Push the matchers for LabelNames all the way into the index.
NB This doesn't actually implement it in the index, just plumbs it through for now...
Signed-off-by: Tom Wilkie <tom@grafana.com>
* Hack it up. Does not work.
Signed-off-by: Tom Wilkie <tom@grafana.com>
* Revert changes I don't understand
Can't see why do we need to hold a mutex on symbols, and the purpose of
the LabelNamesFor method.
Maybe I'll need to re-add this later.
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Implement LabelNamesFor
This method provides the label names that appear in the postings
provided. We do that deeper than the label values because we know
beforehand that most of the label names we'll be the same across
different postings, and we don't want to go down an up looking up the
same symbols for all different series.
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Mutex on symbols should be unlocked
However, I still don't understand why do we need a mutex here.
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Fix head.LabelNamesFor
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Implement mockIndex LabelNames with matchers
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Nitpick on slice initialisation
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Add tests for LabelNamesWithMatchers
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Fix the mutex mess on head.LabelValues/LabelNames
I still don't see why we need to grab that unrelated mutex, but at least
now we're grabbing it consistently
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Check error after iterating postings
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Use the error from posting when there was en error in postings
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Update storage/interface.go comment
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
* Update tsdb/index/index.go comment
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
* Update tsdb/index/index.go wrapped error msg
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
* Update tsdb/index/index.go wrapped error msg
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
* Update tsdb/index/index.go warpped error msg
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
* Remove unneeded comment
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Add testcases for LabelNames w/matchers in api.go
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Use t.Cleanup() instead of defer in tests
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
Co-authored-by: Tom Wilkie <tom@grafana.com>
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
* Added walreplay API endpoint
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Added starting page to react-ui
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Documented the new endpoint
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Fixed typos
Signed-off-by: Levi Harrison <git@leviharrison.dev>
Co-authored-by: Julius Volz <julius.volz@gmail.com>
* Removed logo
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Changed isResponding to isUnexpected
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Changed width of progress bar
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Changed width of progress bar
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Added DB stats object
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Updated starting page to work with new fields
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Passing nil
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Passing nil (pt. 2)
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Passing nil (pt. 3)
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Passing nil (and also implementing a method this time) (pt. 4)
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Passing nil (and also implementing a method this time) (pt. 5)
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Changed const to let
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Passing nil (pt. 6)
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Remove SetStats method
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Added comma
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Changed api
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Changed to triple equals
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Fixed data response types
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Don't return pointer
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Changed version
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Fixed interface issue
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Fixed pointer
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Fixed copying lock value error
Signed-off-by: Levi Harrison <git@leviharrison.dev>
Co-authored-by: Julius Volz <julius.volz@gmail.com>
* Move remote read handler to remote package.
This follows the pattern I started with the remote write handler. The api/v1 package is getting pretty cluttered. Moving code to other packages helps reduce this size and also makes it reusable - eg Cortex doesn't do streaming remote writes yet, and will very soon.
Signed-off-by: Tom Wilkie <tom.wilkie@gmail.com>
* Deal with a nil remoteReadHandler for tests.
Signed-off-by: Tom Wilkie <tom.wilkie@gmail.com>
* Remove the global metrics.
Signed-off-by: Tom Wilkie <tom.wilkie@gmail.com>
* Fix test.
Signed-off-by: Tom Wilkie <tom.wilkie@gmail.com>
* Review feedback.
Signed-off-by: Tom Wilkie <tom.wilkie@gmail.com>
- Remove unrelated changes
- Refactor code out of the API module - that is already getting pretty crowded.
- Don't track reference for AddFast in remote write. This has the potential to consume unlimited server-side memory if a malicious client pushes a different label set for every series. For now, its easier and safer to always use the 'slow' path.
- Return 400 on out of order samples.
- Use remote.DecodeWriteRequest in the remote write adapters.
- Put this behing the 'remote-write-server' feature flag
- Add some (very) basic docs.
- Used named return & add test for commit error propagation
Signed-off-by: Tom Wilkie <tom.wilkie@gmail.com>
* API: Fix global URL when external address has no port
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* Update test
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* Handle IPv6 correctly.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* tsdb: Expose total number of label pairs in head
Signed-off-by: Nguyen Le Vu Long <vulongvn98@gmail.com>
* fix: add comment for NumLabelPairs
Signed-off-by: Nguyen Le Vu Long <vulongvn98@gmail.com>
* fix: remove comment
Signed-off-by: Nguyen Le Vu Long <vulongvn98@gmail.com>
* Small cleanup of API code.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Fixed typo spotted by Julien.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Testify: move to require
Moving testify to require to fail tests early in case of errors.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* More moves
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* cleanup tempfiles for web_test
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
* cleanup tempfiles for api_test
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
* cleanup tempfiles for file_test
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
* tsdb: Added ChunkQueryable implementations to db; unified compactor, querier and fanout block iterating.
Chained to https://github.com/prometheus/prometheus/pull/7059
* NewMerge(Chunk)Querier now takies multiple primaries allowing tsdb DB code to use it.
* Added single SeriesEntry / ChunkEntry for all series implementations.
* Unified all vertical, and non vertical for compact and querying to single
merge series / chunk sets by reusing VerticalSeriesMergeFunc for overlapping algorithm (same logic as before)
* Added block (Base/Chunk/)Querier for block querying. We then use populateAndTomb(Base/Chunk/) to iterate over chunks or samples.
* Refactored endpoint tests and querier tests to include subtests.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Addressed comments from Brian and Beorn.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Fixed snapshot test and added chunk iterator support for DBReadOnly.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Fixed race when iterating over Ats first.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Fixed tests.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Fixed populate block tests.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Fixed endpoints test.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Fixed test.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Added test & fixed case of head open chunk.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Fixed DBReadOnly tests and bug producing 1 sample chunks.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Added cases for partial block overlap for multiple full chunks.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Added extra tests for chunk meta after compaction.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Fixed small vertical merge bug and added more tests for that.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Fixed nits introduced by https://github.com/prometheus/prometheus/pull/7334
* Added ChunkQueryable implementation to fanout and readyStorage.
* Added more comments.
* Changed NewVerticalChunkSeriesMerger to CompactingChunkSeriesMerger, removed tiny interface by reusing VerticalSeriesMergeFunc for overlapping algorithm for
both chunks and series, for both querying and compacting (!) + made sure duplicates are merged.
* Added ErrChunkSeriesSet
* Added Samples interface for seamless []promb.Sample to []tsdbutil.Sample conversion.
* Deprecating non chunks serieset based StreamChunkedReadResponses, added chunk one.
* Improved tests.
* Split remote client into Write (old storage) and read.
* Queryable client is now SampleAndChunkQueryable. Since we cannot use nice QueryableFunc I moved
all config based options to sampleAndChunkQueryableClient to aboid boilerplate.
In next commit: Changes for TSDB.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Fixed returned API status code on error
Signed-off-by: Marco Pracucci <marco@pracucci.com>
* Fixed linter
Signed-off-by: Marco Pracucci <marco@pracucci.com>
* Simplified code
Signed-off-by: Marco Pracucci <marco@pracucci.com>
* Add errors and Warnings to SeriesSet
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Change Querier interface and refactor accordingly
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Refactor promql/engine to propagate warnings at eval stage
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Address review issues
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Make sure all the series from all Selects are pre-advanced
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Address review issues
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Separate merge series sets
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Clean
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Refactor merge querier failure handling
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Refactored and simplified fanout with improvements from incoming chunk iterator PRs.
* Secondary logic is hidden, instead of weird failed series set logic we had.
* Fanout is well commented
* Fanout closing record all errors
* MergeQuerier improved API (clearer)
* deferredGenericMergeSeriesSet is not needed as we return no samples anyway for failed series sets (next = false).
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Fix formatting
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Fix CI issues
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Added final tests for error handling.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Addressed Brian's comments.
* Moved hints in populate to be allocated only when needed.
* Used sync.Once in secondary Querier to achieve all-or-nothing partial response logic.
* Select after first Next is done will panic.
NOTE: in lazySeriesSet in theory we could just panic, I think however we can
totally just return error, it will panic in expand anyway.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Utilize errWithWarnings
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Fix recently introduced expansion issue
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Add tests for secondary querier error handling
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Implement lazy merge
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Add name to test cases
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Reorganize
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Address review comments
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Address review comments
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Remove redundant warnings
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Fix rebase mistake
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com>
* add time range params to labelNames api
Signed-off-by: jessicagreben <Jessica.greben1+github@gmail.com>
* evaluate min/max time range when reading labels from the head
Signed-off-by: jessicagreben <Jessica.greben1+github@gmail.com>
* add time range params to labelValues api
Signed-off-by: jessicagreben <Jessica.greben1+github@gmail.com>
* fix test, add docs
Signed-off-by: jessicagreben <Jessica.greben1+github@gmail.com>
* add a test for head min max range
Signed-off-by: jessicagreben <Jessica.greben1+github@gmail.com>
* fix test to match comment
Signed-off-by: jessicagreben <Jessica.greben1+github@gmail.com>
* address CR comments
Signed-off-by: jessicagreben <Jessica.greben1+github@gmail.com>
* combine vars only used once
Signed-off-by: jessicagreben <Jessica.greben1+github@gmail.com>
* add time range params to labelNames api
Signed-off-by: jessicagreben <Jessica.greben1+github@gmail.com>
* evaluate min/max time range when reading labels from the head
Signed-off-by: jessicagreben <Jessica.greben1+github@gmail.com>
* add time range params to labelValues api
Signed-off-by: jessicagreben <Jessica.greben1+github@gmail.com>
* fix test, add docs
Signed-off-by: jessicagreben <Jessica.greben1+github@gmail.com>
* add a test for head min max range
Signed-off-by: jessicagreben <Jessica.greben1+github@gmail.com>
* fix test to match comment
Signed-off-by: jessicagreben <Jessica.greben1+github@gmail.com>
* address CR comments
Signed-off-by: jessicagreben <Jessica.greben1+github@gmail.com>
* combine vars only used once
Signed-off-by: jessicagreben <Jessica.greben1+github@gmail.com>
* fix test
Signed-off-by: jessicagreben <Jessica.greben1+github@gmail.com>
* restart ci
Signed-off-by: jessicagreben <Jessica.greben1+github@gmail.com>
* use range expectedLabelNames instead of range actualLabelNames in test
Signed-off-by: jessicagreben <Jessica.greben1+github@gmail.com>
* Callbacks for lifecycle of series in TSDB
Signed-off-by: Ganesh Vernekar <cs15btech11018@iith.ac.in>
* Add more comments
Signed-off-by: Ganesh Vernekar <cs15btech11018@iith.ac.in>
* API: Allow AlertmanagerRetriever and RulesRetriever to receive a
Context
Signed-off-by: gotjosh <josue@grafana.com>
* Use single line functions where possible
Signed-off-by: gotjosh <josue@grafana.com>
When appending to the head and a chunk is full it is flushed to the disk and m-mapped (memory mapped) to free up memory
Prom startup now happens in these stages
- Iterate the m-maped chunks from disk and keep a map of series reference to its slice of mmapped chunks.
- Iterate the WAL as usual. Whenever we create a new series, look for it's mmapped chunks in the map created before and add it to that series.
If a head chunk is corrupted the currpted one and all chunks after that are deleted and the data after the corruption is recovered from the existing WAL which means that a corruption in m-mapped files results in NO data loss.
[Mmaped chunks format](https://github.com/prometheus/prometheus/blob/master/tsdb/docs/format/head_chunks.md) - main difference is that the chunk for mmaping now also includes series reference because there is no index for mapping series to chunks.
[The block chunks](https://github.com/prometheus/prometheus/blob/master/tsdb/docs/format/chunks.md) are accessed from the index which includes the offsets for the chunks in the chunks file - example - chunks of series ID have offsets 200, 500 etc in the chunk files.
In case of mmaped chunks, the offsets are stored in memory and accessed from that. During WAL replay, these offsets are restored by iterating all m-mapped chunks as stated above by matching the series id present in the chunk header and offset of that chunk in that file.
**Prombench results**
_WAL Replay_
1h Wal reply time
30% less wal reply time - 4m31 vs 3m36
2h Wal reply time
20% less wal reply time - 8m16 vs 7m
_Memory During WAL Replay_
High Churn:
10-15% less RAM - 32gb vs 28gb
20% less RAM after compaction 34gb vs 27gb
No Churn:
20-30% less RAM - 23gb vs 18gb
40% less RAM after compaction 32.5gb vs 20gb
Screenshots are in [this comment](https://github.com/prometheus/prometheus/pull/6679#issuecomment-621678932)
Signed-off-by: Ganesh Vernekar <cs15btech11018@iith.ac.in>
