Case 1: OOO in-memory head chunk overlaps with first mmaped in-order chunk.
Query: |----------------------------------------------------------------|
InO: |------mmap---------------||---------mem----------------------|
OOO: |-----mem-----------|
This triggers ChunkOrIterableWithCopy not including OOO head chunks bug.
Similar to #14693 however testing the end of the interval doesn't
trigger the problem because there the in-order head chunk will be
trimmed with a tombstone, causing the code to switch to ChunkOrIterable
which was fixed.
See a36d1a8a92/tsdb/querier.go (L646)
where len(p.bufIter.Intervals) will be non zero, because it includes the
tombstone to trim the result to the query max time.
Thus a new test is added to check the overlap at the beginning of the
interval that has a separate chunk, which does not need trimming.
Note: same test doesn't fail for sample querier in Test_Querier_OOOQuery
as that doesn't use copy, that is copyHeadChunk is false in the if
condition above.
Case 2:
OOO mmaped head chunk overlaps with first mmaped in-order chunk.
Query: |----------------------------------------------------------------|
InO: |------mmap---------------||---------mem----------------------|
OOO: |-----mmap-----------| |--mem--|
In this case the meta contains the reference of the in-order chunk and
no indication that a merge is needed with the OOO mmaped chunk.
Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com>
* tsdb: Unit test query overlapping in order and ooo head
Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com>
* TSDB: Merge overlapping head chunk
The basic idea is that getOOOSeriesChunks can populate Meta.Chunk, but since
it only returns one Meta per overlapping time-slot, that pointer may end up in a
Meta with a head-chunk ID. So we need HeadAndOOOChunkReader.ChunkOrIterable()
to call mergedChunks in that case.
Previously, mergedChunks was checking that meta.Ref was a valid OOO chunk reference,
but it never actually uses that reference; it just finds all chunks overlapping in time.
So we can delete that code.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Co-authored-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com>
avoid simultaneous compactions and reduce stress on shared resources.
This is enabled via `--enable-feature=delayed-compaction`.
Signed-off-by: machine424 <ayoubmrini424@gmail.com>
* expose hook for block querier
Signed-off-by: Ben Ye <benye@amazon.com>
* update comment
Signed-off-by: Ben Ye <benye@amazon.com>
* use defined type
Signed-off-by: Ben Ye <benye@amazon.com>
---------
Signed-off-by: Ben Ye <benye@amazon.com>
* add hook to allow head compaction to create multiple output blocks
Signed-off-by: Ben Ye <benye@amazon.com>
* change Compact interface; remove BlockPopulator changes
Signed-off-by: Ben Ye <benye@amazon.com>
* rebase main
Signed-off-by: Ben Ye <benye@amazon.com>
* fix lint
Signed-off-by: Ben Ye <benye@amazon.com>
* fix unit test
Signed-off-by: Ben Ye <benye@amazon.com>
* address feedbacks; add unit test
Signed-off-by: Ben Ye <benye@amazon.com>
* Apply suggestions from code review
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Update tsdb/compact_test.go
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
---------
Signed-off-by: Ben Ye <benye@amazon.com>
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>
* expose hook in tsdb to allow customizing compactor
Signed-off-by: Ben Ye <benye@amazon.com>
* address comment
Signed-off-by: Ben Ye <benye@amazon.com>
---------
Signed-off-by: Ben Ye <benye@amazon.com>
Now the error will include the timestamp and the existing and new values.
When you are trying to track down the source of this error, it can be
useful to see that the values are close, or alternating, or something
else.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
use it in loadDataAsQueryable to make sure the RO Head doesn't truncate or cut new chunks in data/chunks_head/.
add a -sandbox-dir-root flag to "promtool tsdb dump/dump-openmetrics" to control the root of that sandbox dirrectory.
Signed-off-by: machine424 <ayoubmrini424@gmail.com>
Signed-off-by: Jonathan Halterman <jonathan@grafana.com>
Signed-off-by: Jonathan Halterman <jhalterman@gmail.com>
Co-authored-by: Jesus Vazquez <jesusvazquez@users.noreply.github.com>
* Stop compactions if there's a block to write
db.Compact() checks if there's a block to write with HEAD chunks before calling db.compactBlocks().
This is to ensure that if we need to write a block then it happens ASAP, otherwise memory usage might keep growing.
But what can also happen is that we don't need to write any block, we start db.compactBlocks(),
compaction takes hours, and in the meantime HEAD needs to write out chunks to a block.
This can be especially problematic if, for example, you run Thanos sidecar that's uploading block,
which requires that compactions are disabled. Then you disable Thanos sidecar and re-enable compactions.
When db.compactBlocks() is finally called it might have a huge number of blocks to compact, which might
take a very long time, during which HEAD cannot write out chunks to a new block.
In such case memory usage will keep growing until either:
- compactions are finally finished and HEAD can write a block
- we run out of memory and Prometheus gets OOM-killed
This change adds a check for pending HEAD block writes inside db.compactBlocks(), so that
we bail out early if there are still compactions to run, but we also need to write a new
block.
Also add a test for compactBlocks.
---------
Signed-off-by: Łukasz Mierzwa <l.mierzwa@gmail.com>
Signed-off-by: Lukasz Mierzwa <lukasz@cloudflare.com>
* TSDB: Don't compact the head block when empty
Don't compact the Head block if there have not yet been any samples
appended.
Previously, the logic for determining if the head should be compacted
relied on the default values for min and max time and integer overflow
when they were checked in `Head.compactable()`. The check in
`Head.compactable()` effectively did `math.MinInt64 - math.MaxInt64`
which overflowed and wrapped to `1`. Since `1` is less than `1.5`
times the chunk range, compaction did not happen. This was the correct
behavior but relying on overflow wrapping is surprising.
This change add a method for checking if the min and max time for the
head is unset and uses it to short-circuit compaction in that case.
It also replaces several explicit checks for the default value to
determine if the head has not yet had any samples added.
Signed-off-by: Nick Pillitteri <nick.pillitteri@grafana.com>
For instance `require.NoError` will print the unexpected error; we don't
need to include it in the message.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Optimize histogram iterators
Histogram iterators allocate new objects in the AtHistogram and
AtFloatHistogram methods, which makes calculating rates over long
ranges expensive.
In #13215 we allowed an existing object to be reused
when converting an integer histogram to a float histogram. This commit follows
the same idea and allows injecting an existing object in the AtHistogram and
AtFloatHistogram methods. When the injected value is nil, iterators allocate
new histograms, otherwise they populate and return the injected object.
The commit also adds a CopyTo method to Histogram and FloatHistogram which
is used in the BufferedIterator to overwrite items in the ring instead of making
new copies.
Note that a specialized HPoint pool is needed for all of this to work
(`matrixSelectorHPool`).
---------
Signed-off-by: Filip Petkovski <filip.petkovsky@gmail.com>
Co-authored-by: George Krajcsovits <krajorama@users.noreply.github.com>
Digging around the TSDB code and I've found that this flag is unused so
let's remove it.
Signed-off-by: Giedrius Statkevičius <giedrius.statkevicius@vinted.com>
The 'ToFloat' method on integer histograms currently allocates new memory
each time it is called.
This commit adds an optional *FloatHistogram parameter that can be used
to reuse span and bucket slices. It is up to the caller to make sure the
input float histogram is not used anymore after the call.
Signed-off-by: Filip Petkovski <filip.petkovsky@gmail.com>
The ChunkReader interface's Chunk() has been changed to ChunkOrIterable().
This is a precursor to OOO native histogram support - with OOO native histograms, the chunks.Meta passed to Chunk() can result in multiple chunks being returned rather than just a single chunk (e.g. if oooMergedChunk has a counter reset in the middle).
To support this, ChunkOrIterable() requires either a single chunk or an iterable to be returned. If an iterable is returned, the caller has the responsibility of converting the samples from the iterable into possibly multiple chunks. The OOOHeadChunkReader now returns an iterable rather than a chunk to prepare for the native histograms case. Also as a beneficial side effect, oooMergedChunk and boundedChunk has been simplified as they only need to implement the Iterable interface now, not the full Chunk interface.
---------
Signed-off-by: Fiona Liao <fiona.y.liao@gmail.com>
Co-authored-by: George Krajcsovits <krajorama@users.noreply.github.com>
* Add failing test.
Signed-off-by: Charles Korn <charles.korn@grafana.com>
* Don't run OOO head garbage collection while reads are running.
Signed-off-by: Charles Korn <charles.korn@grafana.com>
* Add further test cases for different order of operations.
Signed-off-by: Charles Korn <charles.korn@grafana.com>
* Ensure all queriers are closed if `DB.blockChunkQuerierForRange()` fails.
Signed-off-by: Charles Korn <charles.korn@grafana.com>
* Ensure all queriers are closed if `DB.Querier()` fails.
Signed-off-by: Charles Korn <charles.korn@grafana.com>
* Invert error handling in `DB.Querier()` and `DB.blockChunkQuerierForRange()` to make it clearer
Signed-off-by: Charles Korn <charles.korn@grafana.com>
* Ensure that queries that touch OOO data can't block OOO head garbage collection forever.
Signed-off-by: Charles Korn <charles.korn@grafana.com>
* Address PR feedback: fix parameter name in comment
Co-authored-by: Jesus Vazquez <jesusvazquez@users.noreply.github.com>
Signed-off-by: Charles Korn <charleskorn@users.noreply.github.com>
* Address PR feedback: use `lastGarbageCollectedMmapRef`
Signed-off-by: Charles Korn <charles.korn@grafana.com>
* Address PR feedback: ensure pending reads are cleaned up if creating an OOO querier fails
Signed-off-by: Charles Korn <charles.korn@grafana.com>
---------
Signed-off-by: Charles Korn <charles.korn@grafana.com>
Signed-off-by: Charles Korn <charleskorn@users.noreply.github.com>
Co-authored-by: Jesus Vazquez <jesusvazquez@users.noreply.github.com>
* Remove NewPossibleNonCounterInfo until it can be made more efficient, and avoid creating empty annotations as much as possible
Signed-off-by: Jeanette Tan <jeanette.tan@grafana.com>
