SD Managers take over responsibility for SD metrics registration
---------
Signed-off-by: Paulin Todev <paulin.todev@gmail.com>
Signed-off-by: Björn Rabenstein <github@rabenste.in>
Co-authored-by: Björn Rabenstein <github@rabenste.in>
Wiser coders than myself have come to the conclusion that a `switch`
statement is almost always superior to a statement that includes any
`else if`.
The exceptions that I have found in our codebase are just these two:
* The `if else` is followed by an additional statement before the next
condition (separated by a `;`).
* The whole thing is within a `for` loop and `break` statements are
used. In this case, using `switch` would require tagging the `for`
loop, which probably tips the balance.
Why are `switch` statements more readable?
For one, fewer curly braces. But more importantly, the conditions all
have the same alignment, so the whole thing follows the natural flow
of going down a list of conditions. With `else if`, in contrast, all
conditions but the first are "hidden" behind `} else if `, harder to
spot and (for no good reason) presented differently from the first
condition.
I'm sure the aforemention wise coders can list even more reasons.
In any case, I like it so much that I have found myself recommending
it in code reviews. I would like to make it a habit in our code base,
without making it a hard requirement that we would test on the CI. But
for that, there has to be a role model, so this commit eliminates all
`if else` occurrences, unless it is autogenerated code or fits one of
the exceptions above.
Signed-off-by: beorn7 <beorn@grafana.com>
* refactor: move from io/ioutil to io and os packages
* use fs.DirEntry instead of os.FileInfo after os.ReadDir
Signed-off-by: MOREL Matthieu <matthieu.morel@cnp.fr>
We are re-enabling HTTP 2 again. There has been a few bugfixes upstream
in go, and we have also enabled ReadIdleTimeout.
Fix#7588Fix#9068
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* Fix: Use json.Unmarshal() instead of json.Decoder
See https://ahmet.im/blog/golang-json-decoder-pitfalls/
json.Decoder is for JSON streams, not single JSON objects / bodies.
Signed-off-by: Julius Volz <julius.volz@gmail.com>
* Revert modifications to targetgroup parsing
Signed-off-by: Julius Volz <julius.volz@gmail.com>
This PR introduces support for follow_redirect, to enable users to
disable following HTTP redirects.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
This also fixes a bug in query_log_file, which now is relative to the config file like all other paths.
Signed-off-by: Andy Bursavich <abursavich@gmail.com>
* Update go.mod dependencies before release
Signed-off-by: Julius Volz <julius.volz@gmail.com>
* Add issue for showing query warnings in promtool
Signed-off-by: Julius Volz <julius.volz@gmail.com>
* Revert json-iterator back to 1.1.6
It produced errors when marshaling Point values with special float
values.
Signed-off-by: Julius Volz <julius.volz@gmail.com>
* Fix expected step values in promtool tests after client_golang update
Signed-off-by: Julius Volz <julius.volz@gmail.com>
* Update generated protobuf code after proto dep updates
Signed-off-by: Julius Volz <julius.volz@gmail.com>
From the documentation:
> The default HTTP client's Transport may not
> reuse HTTP/1.x "keep-alive" TCP connections if the Body is
> not read to completion and closed.
This effectively enable keep-alive for the fixed requests.
Signed-off-by: Romain Baugue <romain.baugue@elwinar.com>
i) Uses the more idiomatic Wrap and Wrapf methods for creating nested errors.
ii) Fixes some incorrect usages of fmt.Errorf where the error messages don't have any formatting directives.
iii) Does away with the use of fmt package for errors in favour of pkg/errors
Signed-off-by: tariqibrahim <tariq181290@gmail.com>
* discovery: factorize for SD based on refresh
Signed-off-by: Simon Pasquier <spasquie@redhat.com>
* discovery: use common metrics for refresh
Signed-off-by: Simon Pasquier <spasquie@redhat.com>
* *: use latest release of staticcheck
It also fixes a couple of things in the code flagged by the additional
checks.
Signed-off-by: Simon Pasquier <spasquie@redhat.com>
* Use official release of staticcheck
Also run 'go list' before staticcheck to avoid failures when downloading packages.
Signed-off-by: Simon Pasquier <spasquie@redhat.com>
Fixes#4855 - ServicePort was wrongly used to construct an address to endpoints
defined in portMappings. This was changed to HostPort. Support for obtaining
auto-generated host ports was also added.
Signed-off-by: Timo Beckers <timo@incline.eu>
* marathon-sd - change port gathering strategy, add support for container networking
- removed unnecessary error check on HTTPClientConfig.Validate()
- renamed PortDefinitions and PortMappings to PortDefinition and PortMapping respectively
- extended data model for extra parsed fields from Marathon json
- support container networking on Marathon 1.5+ (target Task.IPAddresses.x.Address)
- expanded test suite to cover all new cases
- test: cancel context when reading from doneCh before returning from function
- test: split test suite into Ports/PortMappings/PortDefinitions
Signed-off-by: Timo Beckers <timo@incline.eu>
This adds support for basic authentication which closes#3090
The support for specifying the client timeout was removed as discussed in https://github.com/prometheus/common/pull/123. Marathon was the only sd mechanism doing this and configuring the timeout is done through `Context`.
DC/OS uses a custom `Authorization` header for authenticating. This adds 2 new configuration properties to reflect this.
Existing configuration files that use the bearer token will no longer work. More work is required to make this backwards compatible.
* refactor: move targetGroup struct and CheckOverflow() to their own package
* refactor: move auth and security related structs to a utility package, fix import error in utility package
* refactor: Azure SD, remove SD struct from config
* refactor: DNS SD, remove SD struct from config into dns package
* refactor: ec2 SD, move SD struct from config into the ec2 package
* refactor: file SD, move SD struct from config to file discovery package
* refactor: gce, move SD struct from config to gce discovery package
* refactor: move HTTPClientConfig and URL into util/config, fix import error in httputil
* refactor: consul, move SD struct from config into consul discovery package
* refactor: marathon, move SD struct from config into marathon discovery package
* refactor: triton, move SD struct from config to triton discovery package, fix test
* refactor: zookeeper, move SD structs from config to zookeeper discovery package
* refactor: openstack, remove SD struct from config, move into openstack discovery package
* refactor: kubernetes, move SD struct from config into kubernetes discovery package
* refactor: notifier, use targetgroup package instead of config
* refactor: tests for file, marathon, triton SD - use targetgroup package instead of config.TargetGroup
* refactor: retrieval, use targetgroup package instead of config.TargetGroup
* refactor: storage, use config util package
* refactor: discovery manager, use targetgroup package instead of config.TargetGroup
* refactor: use HTTPClient and TLS config from configUtil instead of config
* refactor: tests, use targetgroup package instead of config.TargetGroup
* refactor: fix tagetgroup.Group pointers that were removed by mistake
* refactor: openstack, kubernetes: drop prefixes
* refactor: remove import aliases forced due to vscode bug
* refactor: move main SD struct out of config into discovery/config
* refactor: rename configUtil to config_util
* refactor: rename yamlUtil to yaml_config
* refactor: kubernetes, remove prefixes
* refactor: move the TargetGroup package to discovery/
* refactor: fix order of imports
The changes [1][] to Marathon service discovery to support multiple
ports mean that Prometheus now attempts to scrape all ports belonging to
a Marathon service.
You can use port definition or port mapping labels to filter out which
ports to scrape but that requires service owners to update their
Marathon configuration.
To allow for a smoother migration path, add a
`__meta_marathon_port_index` label, whose value is set to the port's
sequential index integer. For example, PORT0 has the value `0`, PORT1
has the value `1`, and so on.
This allows you to support scraping both the first available port (the
previous behaviour) in addition to ports with a `metrics` label.
For example, here's the relabel configuration we might use with
this patch:
- action: keep
source_labels: ['__meta_marathon_port_definition_label_metrics', '__meta_marathon_port_mapping_label_metrics', '__meta_marathon_port_index']
# Keep if port mapping or definition has a 'metrics' label with any
# non-empty value, or if no 'metrics' port label exists but this is the
# service's first available port
regex: ([^;]+;;[^;]+|;[^;]+;[^;]+|;;0)
This assumes that the Marathon API returns the ports in sorted order
(matching PORT0, PORT1, etc), which it appears that it does.
[1]: https://github.com/prometheus/prometheus/pull/2506
