By default same value that was hardcoded is used, but with the
new flag added the number of scrapes can be increased to any value.
Signed-off-by: Pau Freixes <pfreixes@gmail.com>
This moves the label lookup into TSDB, whilst still keeping the cached-ref optimisation for repeated Appends.
This makes the API easier to consume and implement. In particular this change is motivated by the scrape-time-aggregation work, which I don't think is possible to implement without it as it needs access to label values.
Signed-off-by: Tom Wilkie <tom.wilkie@gmail.com>
Accepting alert_rule_test without alertname is confusing as it will
always pass with empty exp_alerts, and never with non-empty exp_alerts.
Signed-off-by: Raphael Bauduin <raphael.bauduin@tessares.net>
- Remove unrelated changes
- Refactor code out of the API module - that is already getting pretty crowded.
- Don't track reference for AddFast in remote write. This has the potential to consume unlimited server-side memory if a malicious client pushes a different label set for every series. For now, its easier and safer to always use the 'slow' path.
- Return 400 on out of order samples.
- Use remote.DecodeWriteRequest in the remote write adapters.
- Put this behing the 'remote-write-server' feature flag
- Add some (very) basic docs.
- Used named return & add test for commit error propagation
Signed-off-by: Tom Wilkie <tom.wilkie@gmail.com>
When printing the error, we still need access to the mmapped byte array
of the file. Therefore, we make sure that we run it before closing the
file.
I could have done something more complex like a defer, or not closing
the file, knowing that we would exit the program anyway. However, I
think that in case we extend this in the future, or this is copy/paster
elsewhere, we should continue closing the file. As it is small enough, I
went for the solution to call the function 3 times instead of playing
with a defer.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
This commit adds `@ <timestamp>` modifier as per this design doc: https://docs.google.com/document/d/1uSbD3T2beM-iX4-Hp7V074bzBRiRNlqUdcWP6JTDQSs/edit.
An example query:
```
rate(process_cpu_seconds_total[1m])
and
topk(7, rate(process_cpu_seconds_total[1h] @ 1234))
```
which ranks based on last 1h rate and w.r.t. unix timestamp 1234 but actually plots the 1m rate.
Signed-off-by: Ganesh Vernekar <cs15btech11018@iith.ac.in>
* Backfilling: optimize for non-consecutive blocks
When you have missing data for > 2 hours, you spend a lot of time
re-reading the complete file. It is not optimal.
This introduces a fastpath for this scenario.
Next, we do parse the metric even when we know we will not use it, based
on its timestamp. This only computes the metric when we know its
timestamp is right.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
I initially thought I could somehow rescue the current column layout
by recycling the tabwriter, but flushing completely blanks
it. However, by setting a minimum width of 13, we get a slightly
broader DURATION column but otherwise nice formatting, unless numbers
get really big, but that's OK, I guess.
Before:
```
BLOCK ULID MIN TIME MAX TIME DURATION NUM SAMPLES NUM CHUNKS NUM SERIES SIZE
01ETN0KGNP5WWK9T5QMQGBG9F1 2020-11-19 07:39:17 +0000 UTC 2020-11-19 07:44:17 +0000 UTC 5m0.001s 8 2 2 624B
01ETN0KGQSFF0AB2QDZVQG3CWC 2020-11-19 10:25:57 +0000 UTC 2020-11-19 10:30:57 +0000 UTC 5m0.001s 8 2 2 622B
01ETN0KGSW8KYP3YPG4X20P60Z 2020-11-19 13:12:37 +0000 UTC 2020-11-19 13:17:37 +0000 UTC 5m0.001s 8 2 2 625B
```
After:
```
BLOCK ULID MIN TIME MAX TIME DURATION NUM SAMPLES NUM CHUNKS NUM SERIES SIZE
01ETN0R72SXN9A1FG732P7KFFN 2020-11-19 07:39:17 +0000 UTC 2020-11-19 07:44:17 +0000 UTC 5m0.001s 8 2 2 624B
01ETN0R74Y9AG1A1MKN4MZK7WM 2020-11-19 10:25:57 +0000 UTC 2020-11-19 10:30:57 +0000 UTC 5m0.001s 8 2 2 622B
01ETN0R76KXZ5VQECMDNES49J6 2020-11-19 13:12:37 +0000 UTC 2020-11-19 13:17:37 +0000 UTC 5m0.001s 8 2 2 625B
```
After without the `-r` flag:
```
BLOCK ULID MIN TIME MAX TIME DURATION NUM SAMPLES NUM CHUNKS NUM SERIES SIZE
01ETN0RFFJ42274NWR1GH0RTV6 1605771557000 1605771857001 5m0.001s 8 2 2 624
01ETN0RFJ1MZCHHS2SBZS8XC27 1605781557000 1605781857001 5m0.001s 8 2 2 622
01ETN0RFM98N3V4KD2DZXFGHGN 1605791557000 1605791857001 5m0.001s 8 2 2 625
```
Signed-off-by: beorn7 <beorn@grafana.com>
* Testify: move to require
Moving testify to require to fail tests early in case of errors.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* More moves
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* MultiError: Refactored MultiError for more concise and safe usage.
* Less lines
* Goland IDE was marking every usage of old MultiError "potential nil" error
* It was easy to forgot using Err() when error was returned, now it's safely assured on compile time.
NOTE: Potentially I would rename package to merrors. (: In different PR.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Addressed review comments.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Addressed comments.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Fix after rebase.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Refactor test assertions
This pull request gets rid of assert.True where possible to use
fine-grained assertions.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* promtool: Calculate mint and maxt per test
Previously a single test that used a later eval time would make all
other tests in the file share the [mint, maxt] and potentially evaluate
far more samples than needed.
Fixes: #8019
Signed-off-by: David Leadbeater <dgl@dgl.cx>
In #7399, an early validity check of the config was introduced to
prevent the scenario where an invalid config is only detected after a
possibly very long startup procedure. However, the respective success
metrics are not updated after the initial validation so that the
success metrics suggest an invalid config. If the startup procedure,
like replaying the WAL, really takes very long, alerts about invalid
config will trigger.
This commit sets the succes metrics after initial validation. They
will be set again after the "real" config (re-)load, but that
shouldn't be a problem. The metric now truthfully represents whenever
the config was successfully loaded, no matter if the result was then
thrown away (because it was just for validation) or actually used.
Signed-off-by: beorn7 <beorn@grafana.com>
If an alert test had a failing test, then any other alert test interval
specified after that point would result in the test exiting early.
This made debugging some tests more difficult than needed.
Now only exit early for evaluation failures.
Signed-off-by: David Leadbeater <dgl@dgl.cx>
This also fixes a bug in query_log_file, which now is relative to the config file like all other paths.
Signed-off-by: Andy Bursavich <abursavich@gmail.com>
* storage: Replace usage of sync/atomic with uber-go/atomic
Signed-off-by: Javier Palomo <javier.palomo.almena@gmail.com>
* tsdb: Replace usage of sync/atomic with uber-go/atomic
Signed-off-by: Javier Palomo <javier.palomo.almena@gmail.com>
* web: Replace usage of sync/atomic with uber-go/atomic
Signed-off-by: Javier Palomo <javier.palomo.almena@gmail.com>
* notifier: Replace usage of sync/atomic with uber-go/atomic
Signed-off-by: Javier Palomo <javier.palomo.almena@gmail.com>
* cmd: Replace usage of sync/atomic with uber-go/atomic
Signed-off-by: Javier Palomo <javier.palomo.almena@gmail.com>
* scripts: Verify that we are not using restricted packages
It checks that we are not directly importing 'sync/atomic'.
Signed-off-by: Javier Palomo <javier.palomo.almena@gmail.com>
* Reorganise imports in blocks
Signed-off-by: Javier Palomo <javier.palomo.almena@gmail.com>
* notifier/test: Apply PR suggestions
Signed-off-by: Javier Palomo <javier.palomo.almena@gmail.com>
* storage/remote: avoid storing references on newEntry
Signed-off-by: Javier Palomo <javier.palomo.almena@gmail.com>
* Revert "scripts: Verify that we are not using restricted packages"
This reverts commit 278d32748e.
Signed-off-by: Javier Palomo <javier.palomo.almena@gmail.com>
* web: Group imports accordingly
Signed-off-by: Javier Palomo <javier.palomo.almena@gmail.com>
* promql: Removed global and add ability to have better interval for subqueries if not specified
## Changes
* Refactored tests for better hints testing
* Added various TODO in places to enhance.
* Moved DefaultEvalInterval global to opts with func(rangeMillis int64) int64 function instead
Motivation: At Thanos we would love to have better control over the subqueries step/interval.
This is important to choose proper resolution. I think having proper step also does not harm for
Prometheus and remote read users. Especially on stateless querier we do not know evaluation interval
and in fact putting global can be wrong to assume for Prometheus even.
I think ideally we could try to have at least 3 samples within the range, the same
way Prometheus UI and Grafana assumes.
Anyway this interfaces allows to decide on promQL user basis.
Open question: Is taking parent interval a smart move?
Motivation for removing global: I spent 1h fighting with:
=== RUN TestEvaluations
TestEvaluations: promql_test.go:31: unexpected error: error evaluating query "absent_over_time(rate(nonexistant[5m])[5m:])" (line 687): unexpected error: runtime error: integer divide by zero
--- FAIL: TestEvaluations (0.32s)
FAIL
At the end I found that this fails on most of the versions including this master if you run this test alone. If run together with many
other tests it passes. This is due to SetDefaultEvaluationInterval(1 * time.Minute)
in test that is ran before TestEvaluations. Thanks to globals (:
Let's fix it by dropping this global.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Added issue links for TODOs.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Removed irrelevant changes.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
To load ALERT_FOR_STATE only `storage.Queryable` interface is required,
so this patch uses this narrower interface for to perform this.
Signed-off-by: Frederic Branczyk <fbranczyk@gmail.com>
* Fixed nits introduced by https://github.com/prometheus/prometheus/pull/7334
* Added ChunkQueryable implementation to fanout and readyStorage.
* Added more comments.
* Changed NewVerticalChunkSeriesMerger to CompactingChunkSeriesMerger, removed tiny interface by reusing VerticalSeriesMergeFunc for overlapping algorithm for
both chunks and series, for both querying and compacting (!) + made sure duplicates are merged.
* Added ErrChunkSeriesSet
* Added Samples interface for seamless []promb.Sample to []tsdbutil.Sample conversion.
* Deprecating non chunks serieset based StreamChunkedReadResponses, added chunk one.
* Improved tests.
* Split remote client into Write (old storage) and read.
* Queryable client is now SampleAndChunkQueryable. Since we cannot use nice QueryableFunc I moved
all config based options to sampleAndChunkQueryableClient to aboid boilerplate.
In next commit: Changes for TSDB.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
