* Send target and metadata cache in context (again)
The previous attempt was rolled back in #10590 due to memory issues.
`sl.parentCtx` and `sl.ctx` both had a copy of the cache and target info
in the previous attempt and it was hard to pin-point where the context
was being retained causing the memory increase.
I've experimented a bunch in #10627 to figure out that this approach doesn't
cause memory increase. Beyond that, just using this info in _any_ other context
is causing a memory increase.
The change fixed a bunch of long-standing in the OTel Collector that the
community was waiting on and release is blocked on a few downstream distrubutions
of OTel Collector waiting on a fix. I propose to merge this change in while
I investigate what is happening.
Signed-off-by: Goutham Veeramachaneni <gouthamve@gmail.com>
* Gate the change behind a manager option
Signed-off-by: Goutham Veeramachaneni <gouthamve@gmail.com>
* refactor: move from io/ioutil to io and os packages
* use fs.DirEntry instead of os.FileInfo after os.ReadDir
Signed-off-by: MOREL Matthieu <matthieu.morel@cnp.fr>
OTel Collector prints the following error when a target disappears:
```
2022-04-13T14:20:24.932-0400 warn scrape/scrape.go:1408 Stale append failed {"kind": "receiver", "name": "prometheus", "scrape_pool": "beep-boop", "target": "http://localhost:9090/metrics", "error": "transaction aborted"}
```
This `transaction aborted` error is returned by the custom appender that is
used by the collector when the context of the appender is cancelled:
b7bf11174e/receiver/prometheusreceiver/internal/otlp_transaction.go (L81-L82)
We call `endOfRunStaleness` after `sl.stop()` which cancels `sl.ctx`.
The other `.Appender()` calls use `parentCtx` for the same reason.
This hasn't come up so far because Prometheus' Appender implementation just
ignores the context passed.
Signed-off-by: Goutham Veeramachaneni <gouthamve@gmail.com>
Storing the scrape cache and the target (which also contains that cache)
is apparently causing hige memory increase. I think me might not control
the lifespan of the context enough, therefore old objects keep living in
memory for longer than needed.
Let's unblock the release and look for an alternative so that downstream
consumers can get access to that data.
Signed-off-by: Julien Pivotto <roidelapluie@o11y.eu>
* discovery: expose HTTP client options to discoverers
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* discovery/http: use HTTP client options for created client
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* scrape: use a list of HTTP client options instead of just dial context
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* discovery: rephrase comment
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* scrape: allow providing a custom Dialer for scraping
This commit extends config.ScrapeConfig with an optional field to
override how HTTP connections to targets are created. This field is not
set directly in Prometheus, and is only added for the convenience of
downstream importers.
Closes#9706
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* scrape: move custom dial function to scrape.Options
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
If reporting metrics fails due to reaching the limit, this makes the
target appear as UP in the UI, but the metrics are missing.
This commit bypasses that limit for report metrics.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
This creates a new `model` directory and moves all data-model related
packages over there:
exemplar labels relabel rulefmt textparse timestamp value
All the others are more or less utilities and have been moved to `util`:
gate logging modetimevfs pool runtime
Signed-off-by: beorn7 <beorn@grafana.com>
* TSDB: demistify seriesRefs and ChunkRefs
The TSDB package contains many types of series and chunk references,
all shrouded in uint types. Often the same uint value may
actually mean one of different types, in non-obvious ways.
This PR aims to clarify the code and help navigating to relevant docs,
usage, etc much quicker.
Concretely:
* Use appropriately named types and document their semantics and
relations.
* Make multiplexing and demuxing of types explicit
(on the boundaries between concrete implementations and generic
interfaces).
* Casting between different types should be free. None of the changes
should have any impact on how the code runs.
TODO: Implement BlockSeriesRef where appropriate (for a future PR)
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* feedback
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
* agent: demistify seriesRefs and ChunkRefs
Signed-off-by: Dieter Plaetinck <dieter@grafana.com>
We are re-enabling HTTP 2 again. There has been a few bugfixes upstream
in go, and we have also enabled ReadIdleTimeout.
Fix#7588Fix#9068
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* Allow to tune the scrape tolerance
In most of the classic monitoring use cases, a few milliseconds
difference can be omitted.
In Prometheus, a few millisecond difference can however make a big
difference.
Currently, Prometheus will ignore up to 2 ms difference in the
alignments.
It turns out that for users who can afford a 10ms difference, there is a
lot of resources and disk space to win, as shown in this graph, which
shows the bytes / samples over a production Prometheus server. You can
clearly see the switch from 2ms to 10ms tolerance.
This pull request enables the adjustment of the scrape timestamp
alignment tolerance.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* Fix golint
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* Refactor: extract function to make scrapeLoop for testing
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Add benchmarks for ScrapeLoopAppend
For Prometheus and OpenMetrics
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Create less garbage when parsing metrics
Exemplar escapes to heap due to being passed through text-parser
interface, but we can reduce the impact by hoisting it out of the loop
and resetting it after every use.
(Note the cost was paid on every line even when exemplars were disabled)
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Create less garbage when parsing OpenMetrics
After calling parseLVals() we always append the return value, so pass in
what we want to append it to and save garbage.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
This adds a new metric exposing per target scrape sample_limit value. Metrics are only exposed if extra-scrape-metrics feature flag is enabled.
scrape_sample_limit will make it easy to monitor and alert on targets getting close to configured sample_limit, which is important given than exceeding sample_limit results in the entire scrape results being rejected.
Signed-off-by: Łukasz Mierzwa <l.mierzwa@gmail.com>
Add a new built-in metric `scrape_timeout_seconds` to allow monitoring
of the ratio of scrape duration to the scrape timeout. Hide behind a
feature flag to avoid additional cardinality by default.
Signed-off-by: SuperQ <superq@gmail.com>
* Write exemplars to the WAL and send them over remote write.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Update example for exemplars, print data in a more obvious format.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Add metrics for remote write of exemplars.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Fix incorrect slices passed to send in remote write.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* We need to unregister the new metrics.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address review comments
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Order of exemplar append vs write exemplar to WAL needs to change.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Several fixes to prevent sending uninitialized or incorrect samples with an exemplar. Fix dropping exemplar for missing series. Add tests for queue_manager sending exemplars
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* Store both samples and exemplars in the same timeseries buffer to remove the alloc when building final request, keep sub-slices in separate buffers for re-use
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* Condense sample/exemplar delivery tests to parameterized sub-tests
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* Rename test methods for clarity now that they also handle exemplars
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* Rename counter variable. Fix instances where metrics were not updated correctly
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* Add exemplars to LoadWAL benchmark
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* last exemplars timestamp metric needs to convert value to seconds with
ms precision
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Process exemplar records in a separate go routine when loading the WAL.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address review comments related to clarifying comments and variable
names. Also refactor sample/exemplar to enqueue prompb types.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Regenerate types proto with comments, update protoc version again.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Put remote write of exemplars behind a feature flag.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address some of Ganesh's review comments.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Move exemplar remote write feature flag to a config file field.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address Bartek's review comments.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Don't allocate exemplar buffers in queue_manager if we're not going to
send exemplars over remote write.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Add ValidateExemplar function, validate exemplars when appending to head
and log them all to WAL before adding them to exemplar storage.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address more reivew comments from Ganesh.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Add exemplar total label length check.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address a few last review comments
Signed-off-by: Callum Styan <callumstyan@gmail.com>
Co-authored-by: Martin Disibio <mdisibio@gmail.com>
* scrape: add label limits per scrape
Add three new limits to the scrape configuration to provide some
mechanism to defend against unbound number of labels and excessive
label lengths. If any of these limits are broken by a sample from a
scrape, the whole scrape will fail. For all of these configuration
options, a zero value means no limit.
The `label_limit` configuration will provide a mechanism to bound the
number of labels per-scrape of a certain sample to a user defined limit.
This limit will be tested against the sample labels plus the discovery
labels, but it will exclude the __name__ from the count since it is a
mandatory Prometheus label to which applying constraints isn't
meaningful.
The `label_name_length_limit` and `label_value_length_limit` will
prevent having labels of excessive lengths. These limits also skip the
__name__ label for the same reasons as the `label_limit` option and will
also make the scrape fail if any sample has a label name/value length
that exceed the predefined limits.
Signed-off-by: Damien Grisonnet <dgrisonn@redhat.com>
* scrape: add metrics and alert to label limits
Add three gauge, one for each label limit to easily access the
limit set by a certain scrape target.
Also add a counter to count the number of targets that exceeded the
label limits and thus were dropped. This is useful for the
`PrometheusLabelLimitHit` alert that will notify the users that scraping
some targets failed because they had samples exceeding the label limits
defined in the scrape configuration.
Signed-off-by: Damien Grisonnet <dgrisonn@redhat.com>
* scrape: apply label limits to __name__ label
Apply limits to the __name__ label that was previously skipped and
truncate the label names and values in the error messages as they can be
very very long.
Signed-off-by: Damien Grisonnet <dgrisonn@redhat.com>
* scrape: remove label limits gauges and refactor
Remove `prometheus_target_scrape_pool_label_limit`,
`prometheus_target_scrape_pool_label_name_length_limit`, and
`prometheus_target_scrape_pool_label_value_length_limit` as they are not
really useful since we don't have the information on the labels in it.
Signed-off-by: Damien Grisonnet <dgrisonn@redhat.com>
