- Unmarshall external_labels config as labels.Labels, add tests.
- Convert some more uses of model.LabelSet to labels.Labels.
- Remove old relabel pkg (fixes#3647).
- Validate external label names.
Signed-off-by: Tom Wilkie <tom.wilkie@gmail.com>
* discovery/kubernetes: fix support for password_file
Signed-off-by: Simon Pasquier <spasquie@redhat.com>
* Create and pass custom RoundTripper to Kubernetes client
Signed-off-by: Simon Pasquier <spasquie@redhat.com>
* Use inline HTTPClientConfig
Signed-off-by: Simon Pasquier <spasquie@redhat.com>
This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down.
We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes.
Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases.
As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s).
This changes also includes the following optimisations:
- only marshal the proto request once, not once per retry
- maintain a single copy of the labels for given series to reduce GC pressure
Other minor tweaks:
- only reshard if we've also successfully sent recently
- add pending samples, latest sent timestamp, WAL events processed metrics
Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype)
Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes)
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* config: set target group source index during unmarshalling
Fixes issue #4214 where the scrape pool is unnecessarily reloaded for a
config reload where the config hasn't changed. Previously, the discovery
manager changed the static config after loading which caused the in-memory
config to differ from a freshly reloaded config.
Signed-off-by: Paul Gier <pgier@redhat.com>
* [issue #4214] Test that static targets are not modified by discovery manager
Signed-off-by: Paul Gier <pgier@redhat.com>
This adds support for basic authentication which closes#3090
The support for specifying the client timeout was removed as discussed in https://github.com/prometheus/common/pull/123. Marathon was the only sd mechanism doing this and configuring the timeout is done through `Context`.
DC/OS uses a custom `Authorization` header for authenticating. This adds 2 new configuration properties to reflect this.
Existing configuration files that use the bearer token will no longer work. More work is required to make this backwards compatible.
* refactor: move targetGroup struct and CheckOverflow() to their own package
* refactor: move auth and security related structs to a utility package, fix import error in utility package
* refactor: Azure SD, remove SD struct from config
* refactor: DNS SD, remove SD struct from config into dns package
* refactor: ec2 SD, move SD struct from config into the ec2 package
* refactor: file SD, move SD struct from config to file discovery package
* refactor: gce, move SD struct from config to gce discovery package
* refactor: move HTTPClientConfig and URL into util/config, fix import error in httputil
* refactor: consul, move SD struct from config into consul discovery package
* refactor: marathon, move SD struct from config into marathon discovery package
* refactor: triton, move SD struct from config to triton discovery package, fix test
* refactor: zookeeper, move SD structs from config to zookeeper discovery package
* refactor: openstack, remove SD struct from config, move into openstack discovery package
* refactor: kubernetes, move SD struct from config into kubernetes discovery package
* refactor: notifier, use targetgroup package instead of config
* refactor: tests for file, marathon, triton SD - use targetgroup package instead of config.TargetGroup
* refactor: retrieval, use targetgroup package instead of config.TargetGroup
* refactor: storage, use config util package
* refactor: discovery manager, use targetgroup package instead of config.TargetGroup
* refactor: use HTTPClient and TLS config from configUtil instead of config
* refactor: tests, use targetgroup package instead of config.TargetGroup
* refactor: fix tagetgroup.Group pointers that were removed by mistake
* refactor: openstack, kubernetes: drop prefixes
* refactor: remove import aliases forced due to vscode bug
* refactor: move main SD struct out of config into discovery/config
* refactor: rename configUtil to config_util
* refactor: rename yamlUtil to yaml_config
* refactor: kubernetes, remove prefixes
* refactor: move the TargetGroup package to discovery/
* refactor: fix order of imports
For special remote read endpoints which have only data for specific
queries, it is desired to limit the number of queries sent to the
configured remote read endpoint to reduce latency and performance
overhead.
Currently all read queries are simply pushed to remote read clients.
This is fine, except for remote storage for wich it unefficient and
make query slower even if remote read is unnecessary.
So we need instead to compare the oldest timestamp in primary/local
storage with the query range lower boundary. If the oldest timestamp
is older than the mint parameter, then there is no need for remote read.
This is an optionnal behavior per remote read client.
Signed-off-by: Thibault Chataigner <t.chataigner@criteo.com>
* k8s: Support discovery of ingresses
* Move additional labels below allocation
This makes it more obvious why the additional elements are allocated.
Also fix allocation for node where we only set a single label.
* k8s: Remove port from ingress discovery
* k8s: Add comment to ingress discovery example
* Add openstack service discovery.
* Add gophercloud code for openstack service discovery.
* first changes for juliusv comments.
* add gophercloud code for floatingip.
* Add tests to openstack sd.
* Add testify suite vendor files.
* add copyright and make changes for code climate.
* Fixed typos in provider openstack.
* Renamed tenant to project in openstack sd.
* Change type of password to Secret in openstack sd.
Allow namespace discovery to be more easily extended in the future by using a struct rather than just a list.
Rename fields for kubernetes namespace discovery
Each remote write endpoint gets its own set of relabeling rules.
This is based on the (yet-to-be-merged)
https://github.com/prometheus/prometheus/pull/2419, which removes legacy
remote write implementations.
This imposes a hard limit on the number of samples ingested from the
target. This is counted after metric relabelling, to allow dropping of
problemtic metrics.
This is intended as a very blunt tool to prevent overload due to
misbehaving targets that suddenly jump in sample count (e.g. adding
a label containing email addresses).
Add metric to track how often this happens.
Fixes#2137
Introduce two new relabel actions. labeldrop, and labelkeep.
These can be used to filter the set of labels by matching regex
- labeldrop: drops all labels that match the regex
- labelkeep: drops all labels that do not match the regex
* Add config, HTTP Basic Auth and TLS support to the generic write path.
- Move generic write path configuration to the config file
- Factor out config.TLSConfig -> tlf.Config translation
- Support TLSConfig for generic remote storage
- Rename Run to Start, and make it non-blocking.
- Dedupe code in httputil for TLS config.
- Make remote queue metrics global.
This adds `role` field to the Kubernetes SD config, which indicates
which type of Kubernetes SD should be run.
This no longer allows discovering pods and nodes with the same SD
configuration for example.
This enables defining `blackbox_exporter` targets (which can be URLs,
because of relabeling) in a JSON file.
Not sure if this is the best approach, but current behaviour is
inconsistent (`UnmarshalYAML` does not have this check) and breaks
officially documented way to use `blackbox_exporter`.
This change deprecates the `target_groups` option in favor
of `static_configs`. The old configuration is still accepted
but prints a warning.
Configuration loading errors if both options are set.
It's actually happening in several places (and for flags, we use the
standard Go time.Duration...). This at least reduces all our
home-grown parsing to one place (in model).
nerve's registration format differs from serverset. With this commit
there is now a dedicated treecache file in util,
and two separate files for serverset and nerve.
Reference:
https://github.com/airbnb/nerve
With the blackbox exporter, the instance label will commonly
be used for things other than hostnames so remove this restriction.
https://example.com or https://example.com/probe/me are some examples.
To prevent user error, check that urls aren't provided as targets
when there's no relabelling that could potentically fix them.
Usernames are not generally considered to be secrets,
and treating them as secrets may lead to confusion
as to how secure they are. Obscuring them also makes
debugging harder.
* Support multiple masters with retries against each master as required.
* Scrape masters' metrics.
* Add role meta label for node/service/master to make it easier for relabeling.
This is with `golint -min_confidence=0.5`.
I left several lint warnings untouched because they were either
incorrect or I felt it was better not to change them at the moment.
The intended use case is where a user has tags/labels coming
from metadata in Kubernetes or EC2, and wants to make
some subset of them into target labels.
Allow scrape_configs to have an optional proxy_url option which specifies
a proxy to be used for all connections to hosts in that config.
Internally this modifies the various client functions to take a *url.URL pointer
which currently must point to an HTTP proxy (but has been left open-ended to
allow the url format to be extended to support others, such as maybe SOCKS if
needed).
This moves the concern of resolving the files relative to the config
file into the configuration loading itself.
It also fixes#921 which did not load the cert and token files relatively.
This takes the modulus of a hash of some labels.
Combined with a keep relabel action, this allows
for sharding of targets across multiple prometheus
servers.
