Instead of a 2-bit write followed by a 14-bit write, do two 8-bit
writes, which goes much faster since it avoids looping.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Benchmarks must do the same work N times.
Run 3 cases, where the values are constant, vary a bit, and vary a lot.
Also aim for 120 samples same as TSDB default.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Shortcut for `.*` matches newlines as well.
Add preamble change ^(?s:
Add test
dotAll flag por al regex
Add and fix regex tests
Signed-off-by: Mario Fernandez <mariofer@redhat.com>
Several regexps were coded like `"^.*$"`, which is an unnatural
formulation nobody is likely to use. Inside `NewMatcher`, `^` and `$`
are added anyway, which makes the form in the benchmark redundant.
It even printed it out in the expected way.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* tsdb: mmapCurrentOOOHeadChunk prepare for multiple ooo chunks
Currently float samples can only create a single ooo head chunk, but
native histograms can result in multiple due to counter resets, etc.
Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com>
* tsdb: getOOOSeriesChunks prepare for multiple ooo chunks
Currently float samples can only create a single ooo head chunk, but
native histograms can result in multiple due to counter resets, etc.
Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com>
---------
Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com>
Check if headQuerier is nil before trying to use it.
* TestQueryOOOHeadDuringTruncate: unit test to check query during truncate
Regression test for #14822
* Simulate race between query and Compact()
Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com>
promql, tsdb (histograms): Do not re-use spans between histograms
When multiple points exist with the same native histogram schemas they
share their spans.
This causes a problem when a native histogram (NH) schema is modified (for example, during
a Sum) then the other NH's with the same spans are also modified. As such,
we should create a new Span for each NH. This will ensure NH's interfaces
are safe to use without considering the effect on other histograms.
At the moment this doesn't present itself as a problem because in all
aggregations and functions operating on native histograms they are copied
by the promql query engine first.
Signed-off-by: Joshua Hesketh <josh@nitrotech.org>
---------
Signed-off-by: Joshua Hesketh <josh@nitrotech.org>
This was part of #14525 which was reverted.
I still think that having this benchmark committed in to the repo is
useful.
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
Starts its index from 0 , but users call Next() before first sample
so it needs to start from -1
Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com>
`getOOOSeriesChunks` was already finding sets of overlapping chunks; we
store those in a `multiMeta` struct so that `ChunkOrIterable` can
reconstruct an `Iterable` easily and predictably.
We no longer need a `MergeOOO` flag to indicate that this Meta should
be merged with other ones; this is explicit in the `multiMeta` structure.
We also no longer need `chunkMetaAndChunkDiskMapperRef`.
Add `wrapOOOHeadChunk` to defeat `chunkenc.Pool` - chunks are reset
during compaction, but if we wrap them (like `safeHeadChunk` was doing
then this is skipped) .
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Case 1: OOO in-memory head chunk overlaps with first mmaped in-order chunk.
Query: |----------------------------------------------------------------|
InO: |------mmap---------------||---------mem----------------------|
OOO: |-----mem-----------|
This triggers ChunkOrIterableWithCopy not including OOO head chunks bug.
Similar to #14693 however testing the end of the interval doesn't
trigger the problem because there the in-order head chunk will be
trimmed with a tombstone, causing the code to switch to ChunkOrIterable
which was fixed.
See a36d1a8a92/tsdb/querier.go (L646)
where len(p.bufIter.Intervals) will be non zero, because it includes the
tombstone to trim the result to the query max time.
Thus a new test is added to check the overlap at the beginning of the
interval that has a separate chunk, which does not need trimming.
Note: same test doesn't fail for sample querier in Test_Querier_OOOQuery
as that doesn't use copy, that is copyHeadChunk is false in the if
condition above.
Case 2:
OOO mmaped head chunk overlaps with first mmaped in-order chunk.
Query: |----------------------------------------------------------------|
InO: |------mmap---------------||---------mem----------------------|
OOO: |-----mmap-----------| |--mem--|
In this case the meta contains the reference of the in-order chunk and
no indication that a merge is needed with the OOO mmaped chunk.
Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com>
Several things done here:
- Set `max-issues-per-linter` to 0 so that we actually see all linter
warnings and not just 50 per linter. (As we also set
`max-same-issues` to 0, I assume this was the intention from the
beginning.)
- Stop using the golangci-lint default excludes (by setting
`exclude-use-default: false`. Those are too generous and don't match
our style conventions. (I have re-added some of the excludes
explicitly in this commit. See below.)
- Re-add the `errcheck` exclusion we have used so far via the
defaults.
- Exclude the signature requirement `govet` has for `Seek` methods
because we use non-standard `Seek` methods a lot. (But we keep other
requirements, while the default excludes completely disabled the
check for common method segnatures.)
- Exclude warnings about missing doc comments on exported symbols. (We
used to be pretty adamant about doc comments, but stopped that at
some point in the past. By now, we have about 500 missing doc
comments. We may consider reintroducing this check, but that's
outside of the scope of this commit. The default excludes of
golangci-lint essentially ignore doc comments completely.)
- By stop using the default excludes, we now get warnings back on
malformed doc comments. That's the most impactful change in this
commit. It does not enforce doc comments (again), but _if_ there is
a doc comment, it has to have the recommended form. (Most of the
changes in this commit are fixing this form.)
- Improve wording/spelling of some comments in .golangci.yml, and
remove an outdated comment.
- Leave `package-comments` inactive, but add a TODO asking if we
should change that.
- Add a new sub-linter `comment-spacings` (and fix corresponding
comments), which avoids missing spaces after the leading `//`.
Signed-off-by: beorn7 <beorn@grafana.com>
* tsdb: Unit test query overlapping in order and ooo head
Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com>
* TSDB: Merge overlapping head chunk
The basic idea is that getOOOSeriesChunks can populate Meta.Chunk, but since
it only returns one Meta per overlapping time-slot, that pointer may end up in a
Meta with a head-chunk ID. So we need HeadAndOOOChunkReader.ChunkOrIterable()
to call mergedChunks in that case.
Previously, mergedChunks was checking that meta.Ref was a valid OOO chunk reference,
but it never actually uses that reference; it just finds all chunks overlapping in time.
So we can delete that code.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Co-authored-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com>
In `mmapCurrentOOOHeadChunk`, check if the number is at the maximum and
drop the data with an error log. This is not expected to happen as the
maximum is over 8 million; that's 8 years of 1 sample every second.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Re-enable check in `createHeadWithOOOSamples` which wasn't really broken.
* Move code making `Block` into a `Queryable` into test file.
* Make `getSeriesChunks` return a slice (renamed `appendSeriesChunks`).
* Rename `oooMergedChunks` to `mergedChunks`.
* Improve comment on `ChunkOrIterableWithCopy`.
* Name return values from unpackHeadChunkRef.
Co-authored-by: Oleg Zaytsev <mail@olegzaytsev.com>
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Use headIndexReader instead.
OOOCompactionHeadIndexReader needs to be expanded slightly, because it previously delegated to OOOHeadIndexReader.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Just query via `HeadAndOOOQuerier`, which will skip series where no
in-order chunks are in range.
Now we don't need `OOORangeHead`.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
