Commit graph

4052 commits

Author SHA1 Message Date
Björn Rabenstein e1a84b6256 Merge pull request #2529 from prometheus/beorn7/storage3
storage: Use staleness delta as head chunk timeout
2017-03-27 14:25:08 +02:00
beorn7 96a303b348 storage: Use staleness delta as head chunk timeout
Currently, if a series stops to exist, its head chunk will be kept
open for an hour. That prevents it from being persisted. Which
prevents it from being evicted. Which prevents the series from being
archived.

Most of the time, once no sample has been added to a series within the
staleness limit, we can be pretty confident that this series will not
receive samples anymore. The whole chain as described above can be
started after 5m instead of 1h. In the relaxed case, this doesn't
change a lot as the head chunk timeout is only checked during series
maintenance, and usually, a series is only maintained every six
hours. However, there is the typical scenario where a large service is
deployed, the deoply turns out to be bad, and then it is deployed
again within minutes, and quite quickly the number of time series has
tripled. That's the point where the Prometheus server is stressed and
switches (rightfully) into rushed mode. In that mode, time series are
processed as quickly as possible, but all of that is in vein if all of
those recently ended time series cannot be persisted yet for another
hour. In that scenario, this change will help most, and it's exactly
the scenario where help is most desperately needed.
2017-03-26 23:44:50 +02:00
beorn7 04ccf84559 main.go: Set GOGC to 40 by default
Rationale: The default value for GOGC is 100, i.e. a garbage collected
is initialized once as many heap space has been allocated as was in
use after the last GC was done. This ratio doesn't make a lot of sense
in Prometheus, as typically about 60% of the heap is allocated for
long-lived memory chunks (most of which are around for many hours if
not days). Thus, short-lived heap objects are accumulated for quite
some time until they finally match the large amount of memory used by
bulk memory chunks and a gigantic GC cyle is invoked. With GOGC=40, we
are essentially reinstating "normal" GC behavior by acknowledging that
about 60% of the heap are used for long-term bulk storage.

The median Prometheus production server at SoundCloud runs a GC cycle
every 90 seconds. With GOGC=40, a GC cycle is run every 35 seconds
(which is still not very often). However, the effective RAM usage is
now reduced by about 30%. If settings are updated to utilize more RAM,
the time between GC cycles goes up again (as the heap size is larger
with more long-lived memory chunks, but the frequency of creating
short-lived heap objects does not change). On a quite busy large
Prometheus server, the timing changed from one GC run every 20s to one
GC run every 12s.

In the former case (just changing GOGC, leave everything else as it
is), the CPU usage increases by about 10% (on a mid-size referenc
server from 8.1 to 8.9). If settings are adjusted, the CPU
consumptions increases more drastically (from 8 cores to 13 cores on a
large reference server), despite GCs happening more rarely, presumably
because a 50% larger set of memory chunks is managed now. Having more
memory chunks is good in many regards, and most servers are running
out of memory long before they run out of CPU cycles, so the tradeoff
is overwhelmingly positive in most cases.

Power users can still set the GOGC environment variable as usual, as
the implementation in this commit honors an explicitly set variable.
2017-03-26 21:55:37 +02:00
Julius Volz 3f23aa2cc7 Add headers to indicate remote read/write version
Also add Content-Type header.
2017-03-24 17:39:51 +01:00
Fabian Reinartz a2e7b0b934 venodr: update tsdb and go-kit/log 2017-03-23 18:44:15 +01:00
Tobias Schmidt 6dbd779099 Merge pull request #2519 from prometheus/update-arch-diag-link
Update architecture diagram link
2017-03-23 14:18:38 +02:00
Julius Volz a20105ddb0 Update architecture diagram link 2017-03-23 13:16:54 +01:00
Julius Volz c34257d069 Merge pull request #2518 from prometheus/update-arch-diag
Remove PromDash from architecture diagram
2017-03-23 13:13:14 +01:00
Julius Volz 428e1ad42c Remove PromDash from architecture diagram 2017-03-23 13:11:05 +01:00
Björn Rabenstein ddcf04a768 Merge pull request #2515 from leitzler/leitzler-patch-1
Use go env to fetch GOPATH to support Go 1.8
2017-03-23 11:58:30 +01:00
Pontus Leitzler 4774d6736a Use go env to fetch GOPATH to support Go 1.8
Go 1.8 do not require env GOPATH to be set and make will fail if it isn't set.
2017-03-22 19:04:20 +01:00
Julius Volz 8fda83ea12 Make rules only read local data 2017-03-21 00:50:04 +01:00
Julius Volz 94acd3f1d8 Add fanin tests and fix uncovered bugs 2017-03-21 00:08:17 +01:00
Julius Volz 9b33cfc457 Fix/unify context-based remote storage timeouts 2017-03-20 14:17:06 +01:00
Julius Volz 815762a4ad Move retrieval.NewHTTPClient -> httputil.NewClientFromConfig 2017-03-20 14:17:04 +01:00
Fabian Reinartz 397f001ac5 Merge branch 'master' into dev-2.0 2017-03-20 14:12:11 +01:00
Fabian Reinartz fc2e56c13f vendor: update tsdb 2017-03-20 14:07:25 +01:00
Julius Volz eb14678a25 Make remote read/write use config.HTTPClientConfig 2017-03-20 13:37:50 +01:00
Julius Volz 406b65d0dc Rename remote.Storage to remote.Writer 2017-03-20 13:15:28 +01:00
Julius Volz 02395a224d [WIP] Remote Read 2017-03-20 13:13:44 +01:00
Julius Volz 40e41a4776 Merge pull request #2494 from tomwilkie/remote-write-sharding
Dynamically reshard the QueueManager based on observed load.
2017-03-20 12:45:17 +01:00
Julius Volz 525da88c35 Merge pull request #2479 from YKlausz/consul-tls
Adding consul capability to connect via tls
2017-03-20 11:40:18 +01:00
Fabian Reinartz 0958c83d5d Merge pull request #2511 from prometheus/fix-go-build
Only truncate buildVersion if it's set
2017-03-20 08:46:57 +01:00
Julius Volz 107c33545b Don't truncate build version 2017-03-19 18:37:23 +01:00
Goutham Veeramachaneni 5c89cec65c Stricter Relabel Config Checking for Labeldrop/keep (#2510)
* Minor code cleanup

* Labeldrop/Labelkeep Now *Only* Support Regex

Ref promtheus/prometheus#2368
2017-03-18 22:32:08 +01:00
Robson Roberto Souza Peixoto cc3e859d9e Add support for multiple ports in Marathon (#2506)
- create a target for every port
- add meta labels for Marathon labels in portMappings and portDefinitions
2017-03-18 22:10:44 +02:00
yklausz 75880b594f Adding consul capability to connect via tls 2017-03-17 22:37:18 +01:00
Fabian Reinartz c389193b37 Merge branch 'master' into dev-2.0 2017-03-17 16:27:07 +01:00
Fabian Reinartz b586781283 *: update tsdb vendoring and add retention flag 2017-03-17 16:06:04 +01:00
Fabian Reinartz 0a7c8e9da1 Merge pull request #2504 from prometheus/grobie/fix-discovery-naming
Follow golang naming conventions in discovery packages
2017-03-17 08:01:48 +01:00
Tobias Schmidt 7bde44e98e Remove testing.T usage in goroutines
The staticcheck warns about testing.T usage in goroutines. Moving the
t.Fatal* calls to the main thread showed immediately that this is a good
practice, as one of the test setups didn't work.
2017-03-16 23:40:46 -03:00
Tobias Schmidt 58cd39aacd Follow golang naming conventions in discovery packages 2017-03-16 23:40:46 -03:00
Bplotka 1823ae8bc4 Fixed int64 overflow for timestamp in v1/api parseDuration and parseTime (#2501)
* Fixed int64 overflow for timestamp in v1/api parseDuration and parseTime

This led to unexpected results on wrong query with "(...)&start=148966367200.372&end=1489667272.372"
That query is wrong because of `start > end` but actually internal int64 overflow caused start to be something around MinInt64 (huge negative value) and was passing validation.

BTW: Not sure if negative timestamp makes sense even.. But model.Earliest is actually MinInt64, can someone explain me why?

Signed-off-by: Bartek Plotka <bwplotka@gmail.com>

* Added missing trailing periods on comments.

Signed-off-by: Bartek Plotka <bwplotka@gmail.com>

* MOved to only `<` and `>`. Removed equal.

Signed-off-by: Bartek Plotka <bwplotka@gmail.com>
2017-03-16 15:16:20 +01:00
beorn7 48d221c11e storage: Fix typo in comment 2017-03-16 11:49:41 +01:00
Robert Neumayer feb7670929 Add tests for consul service discovery (#2490)
* Add tests for consul service discovery

* Add license header

* Address comments

* inline variables
* check for extra error

* Fix error formatting
2017-03-15 09:33:53 +01:00
Fabian Reinartz 0ecd205794 promql: Use buffer pool for matrix allocations 2017-03-14 10:57:34 +01:00
Tom Wilkie 75bb0f3253 Review feedback 2017-03-13 21:24:49 +00:00
Tom Wilkie 77cce900b8 Fix tests 2017-03-13 15:21:59 +00:00
Tom Wilkie b48799a01e Add license stanza 2017-03-13 14:50:15 +00:00
Tom Wilkie 9d22f030cf Dynamically reshard the QueueManager based on observed load. 2017-03-13 14:41:16 +00:00
Wéber Gyula 5aa90c075b added docker run command to readme (#2491)
* added docker run command to readme

* updated codebox in readme
2017-03-13 11:37:25 +01:00
Fabian Reinartz de1e4322d7 Merge pull request #2474 from Gouthamve/custom-timeouts-1399
Support Custom Timeout for Queries
2017-03-12 14:20:59 +01:00
Fabian Reinartz b09b90a940 Correctly close querier on error, revendor tsdb 2017-03-09 15:40:52 +01:00
Fabian Reinartz 3abf54c660 Merge branch 'dev-2.0-compact' into dev-2.0 2017-03-08 17:01:32 +01:00
Fabian Reinartz f160c4eb20 vendor: integrate various tsdb fixes 2017-03-08 16:54:48 +01:00
Fabian Reinartz 5ec1efe622 retrieval: fix test 2017-03-08 15:37:12 +01:00
Fabian Reinartz 2677f3eaf2 Merge pull request #2462 from m-kraus/master
Allow the use of bearer_token or bearer_token_file for MarathonSD authorization
2017-03-08 10:33:26 +01:00
Julius Volz e22553edd2 Merge pull request #2468 from agaoglu/version-statics
Adding version to names of static files
2017-03-07 22:22:01 +01:00
Erdem Agaoglu 90625b0400 Use revision as cachebuster 2017-03-07 18:03:52 +03:00
Fabian Reinartz b416ccb650 vendor: add old inluxdb client 2017-03-07 12:04:15 +01:00