Wiser coders than myself have come to the conclusion that a `switch`
statement is almost always superior to a statement that includes any
`else if`.
The exceptions that I have found in our codebase are just these two:
* The `if else` is followed by an additional statement before the next
condition (separated by a `;`).
* The whole thing is within a `for` loop and `break` statements are
used. In this case, using `switch` would require tagging the `for`
loop, which probably tips the balance.
Why are `switch` statements more readable?
For one, fewer curly braces. But more importantly, the conditions all
have the same alignment, so the whole thing follows the natural flow
of going down a list of conditions. With `else if`, in contrast, all
conditions but the first are "hidden" behind `} else if `, harder to
spot and (for no good reason) presented differently from the first
condition.
I'm sure the aforemention wise coders can list even more reasons.
In any case, I like it so much that I have found myself recommending
it in code reviews. I would like to make it a habit in our code base,
without making it a hard requirement that we would test on the CI. But
for that, there has to be a role model, so this commit eliminates all
`if else` occurrences, unless it is autogenerated code or fits one of
the exceptions above.
Signed-off-by: beorn7 <beorn@grafana.com>
We haven't updated golint-ci in our CI yet, but this commit prepares
for that.
There are a lot of new warnings, and it is mostly because the "revive"
linter got updated. I agree with most of the new warnings, mostly
around not naming unused function parameters (although it is justified
in some cases for documentation purposes – while things like mocks are
a good example where not naming the parameter is clearer).
I'm pretty upset about the "empty block" warning to include `for`
loops. It's such a common pattern to do something in the head of the
`for` loop and then have an empty block. There is still an open issue
about this: https://github.com/mgechev/revive/issues/810 I have
disabled "revive" altogether in files where empty blocks are used
excessively, and I have made the effort to add individual
`// nolint:revive` where empty blocks are used just once or twice.
It's borderline noisy, though, but let's go with it for now.
I should mention that none of the "empty block" warnings for `for`
loop bodies were legitimate.
Signed-off-by: beorn7 <beorn@grafana.com>
In other words: Instead of having a “polymorphous” `Point` that can
either contain a float value or a histogram value, use an `FPoint` for
floats and an `HPoint` for histograms.
This seemingly small change has a _lot_ of repercussions throughout
the codebase.
The idea here is to avoid the increase in size of `Point` arrays that
happened after native histograms had been added.
The higher-level data structures (`Sample`, `Series`, etc.) are still
“polymorphous”. The same idea could be applied to them, but at each
step the trade-offs needed to be evaluated.
The idea with this change is to do the minimum necessary to get back
to pre-histogram performance for functions that do not touch
histograms. Here are comparisons for the `changes` function. The test
data doesn't include histograms yet. Ideally, there would be no change
in the benchmark result at all.
First runtime v2.39 compared to directly prior to this commit:
```
name old time/op new time/op delta
RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 542µs ± 1% +38.58% (p=0.000 n=9+8)
RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 617µs ± 2% +36.48% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.36ms ± 2% +21.58% (p=0.000 n=8+10)
RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 8.94ms ± 1% +14.21% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.30ms ± 1% +10.67% (p=0.000 n=9+10)
RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.10ms ± 1% +11.82% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 11.8ms ± 1% +12.50% (p=0.000 n=8+10)
RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 87.4ms ± 1% +12.63% (p=0.000 n=9+9)
RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 32.8ms ± 1% +8.01% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.6ms ± 2% +9.64% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 117ms ± 1% +11.69% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 876ms ± 1% +11.83% (p=0.000 n=9+10)
```
And then runtime v2.39 compared to after this commit:
```
name old time/op new time/op delta
RangeQuery/expr=changes(a_one[1d]),steps=1-16 391µs ± 2% 547µs ± 1% +39.84% (p=0.000 n=9+8)
RangeQuery/expr=changes(a_one[1d]),steps=10-16 452µs ± 2% 616µs ± 2% +36.15% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_one[1d]),steps=100-16 1.12ms ± 1% 1.26ms ± 1% +12.20% (p=0.000 n=8+10)
RangeQuery/expr=changes(a_one[1d]),steps=1000-16 7.83ms ± 1% 7.95ms ± 1% +1.59% (p=0.000 n=10+8)
RangeQuery/expr=changes(a_ten[1d]),steps=1-16 2.98ms ± 0% 3.38ms ± 2% +13.49% (p=0.000 n=9+10)
RangeQuery/expr=changes(a_ten[1d]),steps=10-16 3.66ms ± 1% 4.02ms ± 1% +9.80% (p=0.000 n=10+9)
RangeQuery/expr=changes(a_ten[1d]),steps=100-16 10.5ms ± 0% 10.8ms ± 1% +3.08% (p=0.000 n=8+10)
RangeQuery/expr=changes(a_ten[1d]),steps=1000-16 77.6ms ± 1% 78.1ms ± 1% +0.58% (p=0.035 n=9+10)
RangeQuery/expr=changes(a_hundred[1d]),steps=1-16 30.4ms ± 2% 33.5ms ± 4% +10.18% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_hundred[1d]),steps=10-16 37.1ms ± 2% 40.0ms ± 1% +7.98% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_hundred[1d]),steps=100-16 105ms ± 1% 107ms ± 1% +1.92% (p=0.000 n=10+10)
RangeQuery/expr=changes(a_hundred[1d]),steps=1000-16 783ms ± 3% 775ms ± 1% -1.02% (p=0.019 n=9+9)
```
In summary, the runtime doesn't really improve with this change for
queries with just a few steps. For queries with many steps, this
commit essentially reinstates the old performance. This is good
because the many-step queries are the one that matter most (longest
absolute runtime).
In terms of allocations, though, this commit doesn't make a dent at
all (numbers not shown). The reason is that most of the allocations
happen in the sampleRingIterator (in the storage package), which has
to be addressed in a separate commit.
Signed-off-by: beorn7 <beorn@grafana.com>
This makes it more consistent with other command like import rules. We
don't have stricts rules and uniformity accross promtool unfortunately,
but I think it's better to only have the http config on relevant check
commands to avoid thinking Prometheus can e.g. check the config over the
wire.
Signed-off-by: Julien Pivotto <roidelapluie@o11y.eu>
There are a few tests that will run prometheus command.
This can test if there's already something listening on port :9090 since --web.listen-address defaults to 0.0.0.0:9090.
To fix that we can tell prometheus to use a random port on loopback interface.
Signed-off-by: Łukasz Mierzwa <l.mierzwa@gmail.com>
It took a `Labels` where the memory could be re-used, but in practice
this hardly ever benefitted. Especially after converting `relabel.Process`
to `relabel.ProcessBuilder`.
Comparing the parameter to `nil` was a bug; `EmptyLabels` is not `nil`
so the slice was reallocated multiple times by `append`.
Lastly `Builder.Labels()` now estimates that the final size will depend
on labels added and deleted.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Scraping targets are synced by creating the full set, then adding/removing any which have changed.
This PR speeds up the process of creating the full set.
I added a benchmark for `TargetsFromGroup`; it uses configuration from a typical Kubernetes SD.
The crux of the change is to do relabeling inside labels.Builder instead of converting to labels.Labels and back again for every rule. The change is broken into several commits for easier review.
This is a breaking change to `scrape.PopulateLabels()`, but `relabel.Process` is left as-is, with a new `relabel.ProcessBuilder` option.
Common service discovery mechanisms such as Kubernetes can generate a
lot of target groups, so this function was allocating a lot of memory
which then immediately became garbage. Re-using the structures across
an entire Sync saves effort.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Save work converting to `Labels` then to `Builder`.
`PopulateLabels()` now takes as Builder as input.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Dumping without any limit on the data being dumped will generate
a large amount of data. Also, sometimes it is necessary to dump
only a part of the data in order to change or transfer it.
This change allows to specify a part of the data to dump and
by default works same as before. (no public API change)
Signed-off-by: Amin Borjian <borjianamin98@outlook.com>
Extends Appender.AppendHistogram function to accept the FloatHistogram. TSDB supports appending, querying, WAL replay, for this new type of histogram.
Signed-off-by: Marc Tudurí <marctc@protonmail.com>
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>
Instead of passing in a `ScratchBuilder` and `Labels`, just pass the
builder and the caller can extract labels from it. In many cases the
caller didn't use the Labels value anyway.
Now in `Labels.ScratchBuilder` we need a slightly different API: one
to assign what will be the result, instead of overwriting some other
`Labels`. This is safer and easier to reason about.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
This necessitates a change to the `tsdb.IndexReader` interface:
`index.Reader` is used from multiple goroutines concurrently, so we
can't have state in it.
We do retain a `ScratchBuilder` in `blockBaseSeriesSet` which is
iterator-like.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Patterned after `Chunk.Iterator()`: pass the old iterator in so it
can be re-used to avoid allocating a new object.
(This commit does not do any re-use; it is just changing all the method
signatures so re-use is possible in later commits.)
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Introduce out-of-order TSDB support
This implementation is based on this design doc:
https://docs.google.com/document/d/1Kppm7qL9C-BJB1j6yb6-9ObG3AbdZnFUBYPNNWwDBYM/edit?usp=sharing
This commit adds support to accept out-of-order ("OOO") sample into the TSDB
up to a configurable time allowance. If OOO is enabled, overlapping querying
are automatically enabled.
Most of the additions have been borrowed from
https://github.com/grafana/mimir-prometheus/
Here is the list ist of the original commits cherry picked
from mimir-prometheus into this branch:
- 4b2198d7ec
- 2836e5513f
- 00b379c3a5
- ff0dc75758
- a632c73352
- c6f3d4ab33
- 5e8406a1d4
- abde1e0ba1
- e70e769889
- df59320886
Co-authored-by: Jesus Vazquez <jesus.vazquez@grafana.com>
Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>
Co-authored-by: Dieter Plaetinck <dieter@grafana.com>
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* gofumpt files
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Add license header to missing files
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Fix OOO tests due to existing chunk disk mapper implementation
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Fix truncate int overflow
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Add Sync method to the WAL and update tests
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* remove useless sync
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Update minOOOTime after truncating Head
* Update minOOOTime after truncating Head
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Fix lint
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Add a unit test
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Load OutOfOrderTimeWindow only once per appender
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Fix OOO Head LabelValues and PostingsForMatchers
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Fix replay of OOO mmap chunks
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Remove unnecessary err check
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Prevent panic with ApplyConfig
Signed-off-by: Ganesh Vernekar 15064823+codesome@users.noreply.github.com
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Run OOO compaction after restart if there is OOO data from WBL
Signed-off-by: Ganesh Vernekar 15064823+codesome@users.noreply.github.com
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Apply Bartek's suggestions
Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com>
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Refactor OOO compaction
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Address comments and TODOs
- Added a comment explaining why we need the allow overlapping
compaction toggle
- Clarified TSDBConfig OutOfOrderTimeWindow doc
- Added an owner to all the TODOs in the code
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Run go format
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Fix remaining review comments
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Fix tests
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Change wbl reference when truncating ooo in TestHeadMinOOOTimeUpdate
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Fix TestWBLAndMmapReplay test failure on windows
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Address most of the feedback
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Refactor the block meta for out of order
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Fix windows error
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Fix review comments
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
Signed-off-by: Ganesh Vernekar 15064823+codesome@users.noreply.github.com
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>
Co-authored-by: Dieter Plaetinck <dieter@grafana.com>
Co-authored-by: Oleg Zaytsev <mail@olegzaytsev.com>
Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Add runtime config to control native histogram ingestion
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Make the config into a CLI flag
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Append metadata to the WAL
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Remove extra whitespace; Reword some docstrings and comments
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Use RLock() for hasNewMetadata check
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Use single byte for metric type in RefMetadata
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Update proposed WAL format for single-byte type metadata
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Address first round of review comments
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Amend description of metadata in wal.md
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Correct key used to retrieve metadata from cache
When we're setting metadata entries in the scrapeCace, we're using the
p.Help(), p.Unit(), p.Type() helpers, which retrieve the series name and
use it as the cache key. When checking for cache entries though, we used
p.Series() as the key, which included the metric name _with_ its labels.
That meant that we were never actually hitting the cache. We're fixing
this by utiling the __name__ internal label for correctly getting the
cache entries after they've been set by setHelp(), setType() or
setUnit().
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Put feature behind a feature flag
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Reorder WAL format document
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix CR comments
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Extract logic about changing metadata in an anonymous function
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Implement new proposed WAL format and amend relevant tests
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Use 'const' for metadata field names
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Apply metadata to head memSeries in Commit, not in AppendMetadata
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Add docstring and rename extracted helper in scrape.go
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix review comments around TestMetadata* tests
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Rebase with merged TSDB changes; fix duplicate definitions after rebase
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Remove leftover changes on db_test.go
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Rename feature flag
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Simplify updateMetadata helper function
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Remove extra newline
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* model/relabel: Add benchmark
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* model/relabel: re-use Builder across relabels
Saves memory allocations.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* labels.Builder: allow re-use of result slice
This reduces memory allocations where the caller has a suitable slice available.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* model/relabel: re-use source values slice
To reduce memory allocations.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Unwind one change causing test failures
Restore original behaviour in PopulateLabels, where we must not overwrite the input set.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* relabel: simplify values optimisation
Use a stack-based array for up to 16 source labels, which will be the
vast majority of cases.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* lint
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Append metadata to the WAL
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Remove extra whitespace; Reword some docstrings and comments
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Use RLock() for hasNewMetadata check
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Use single byte for metric type in RefMetadata
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Update proposed WAL format for single-byte type metadata
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Implementa MetadataAppender interface for the Agent
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Address first round of review comments
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Amend description of metadata in wal.md
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Correct key used to retrieve metadata from cache
When we're setting metadata entries in the scrapeCace, we're using the
p.Help(), p.Unit(), p.Type() helpers, which retrieve the series name and
use it as the cache key. When checking for cache entries though, we used
p.Series() as the key, which included the metric name _with_ its labels.
That meant that we were never actually hitting the cache. We're fixing
this by utiling the __name__ internal label for correctly getting the
cache entries after they've been set by setHelp(), setType() or
setUnit().
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Put feature behind a feature flag
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix AppendMetadata docstring
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Reorder WAL format document
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Change error message of AppendMetadata; Fix access of s.meta in AppendMetadata
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Reuse temporary buffer in Metadata encoder
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Only keep latest metadata for each refID during checkpointing
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix test that's referencing decoding metadata
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Avoid creating metadata block if no new metadata are present
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Add tests for corrupt metadata block and relevant record type
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix CR comments
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Extract logic about changing metadata in an anonymous function
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Implement new proposed WAL format and amend relevant tests
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Use 'const' for metadata field names
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Apply metadata to head memSeries in Commit, not in AppendMetadata
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Add docstring and rename extracted helper in scrape.go
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Add tests for tsdb-related cases
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix linter issues vol1
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix linter issues vol2
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix Windows test by closing WAL reader files
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Use switch instead of two if statements in metadata decoding
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix review comments around TestMetadata* tests
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Add code for replaying WAL; test correctness of in-memory data after a replay
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Remove scrape-loop related code from PR
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Address first round of comments
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Simplify tests by sorting slices before comparison
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix test to use separate transactions
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Empty out buffer and record slices after encoding latest metadata
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix linting issue
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Update calculation for DroppedMetadata metric
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Rename MetadataAppender interface and AppendMetadata method to MetadataUpdater/UpdateMetadata
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Reuse buffer when encoding latest metadata for each series
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix review comments; Check all returned error values using two helpers
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Simplify use of helpers
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Satisfy linter
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
