* Remove NewPossibleNonCounterInfo until it can be made more efficient, and avoid creating empty annotations as much as possible
Signed-off-by: Jeanette Tan <jeanette.tan@grafana.com>
When Prometheus restarts it creates every series read in from the WAL,
but many of those series will be finished, and never receive any more
samples. By defering allocation of the txRing slice to when it is first
needed, we save 32 bytes per stale series.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
When reading the WAL this method is called with buffers from a pool, on
multiple goroutines. Pre-allocating sufficient size avoids slow growth
and many reallocations in `append`.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
On a 32 bit architecture the size of int is 32 bits. Thus converting from
int64, uint64 can overflow it and flip the sign.
Try for yourself in playground:
package main
import "fmt"
func main() {
x := int64(0x1F0000001)
y := int64(1)
z := int32(x - y) // numerically this is 0x1F0000000
fmt.Printf("%v\n", z)
}
Prints -268435456 as if x was smaller.
Followup to #12650
Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com>
* Additionally wrap WBL replay error
Although WBL replay is already wrapped with errLoadWbl,
there are other errors that can happen during a WBL replay.
We should not try to repair WAL in those cases.
This commit additionally wraps the final error in Head.Init again
with errLoadWbl so that WBL replay errors can be identified properly.
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
Signed-off-by: Jesus Vazquez <jesusvzpg@gmail.com>
Co-authored-by: Jesus Vazquez <jesusvzpg@gmail.com>
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Additionally wrap WBL replay error
Although WBL replay is already wrapped with errLoadWbl,
there are other errors that can happen during a WBL replay.
We should not try to repair WAL in those cases.
This commit additionally wraps the final error in Head.Init again
with errLoadWbl so that WBL replay errors can be identified properly.
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
Signed-off-by: Jesus Vazquez <jesusvzpg@gmail.com>
Co-authored-by: Jesus Vazquez <jesusvzpg@gmail.com>
Reverts change from https://github.com/prometheus/prometheus/pull/12906
The benchmarks show that it's slower when intersecting, which is a
common usage for ListPostings (when intersecting matchers from Head)
(old is before #12906, new is #12906):
│ old │ new │
│ sec/op │ sec/op vs base │
Intersect/LongPostings1-16 20.54µ ± 1% 21.11µ ± 1% +2.76% (p=0.000 n=20)
Intersect/LongPostings2-16 51.03m ± 1% 52.40m ± 2% +2.69% (p=0.000 n=20)
Intersect/ManyPostings-16 194.2m ± 3% 332.1m ± 1% +71.00% (p=0.000 n=20)
geomean 5.882m 7.161m +21.74%
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
It's implicit, but should be explicit. It is invalid to call At() after
a failed call to Next() or Seek().
Following up on https://github.com/prometheus/prometheus/pull/12906
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
The Next() call of ListPostings() was updating two values, while we can
just update the position. This is up to 30% faster for high number of
Postings.
goos: linux
goarch: amd64
pkg: github.com/prometheus/prometheus/tsdb/index
cpu: 11th Gen Intel(R) Core(TM) i7-11700K @ 3.60GHz
│ old │ new │
│ sec/op │ sec/op vs base │
ListPostings/count=100-16 819.2n ± 0% 732.6n ± 0% -10.58% (p=0.000 n=20)
ListPostings/count=1000-16 2.685µ ± 1% 2.017µ ± 0% -24.88% (p=0.000 n=20)
ListPostings/count=10000-16 21.43µ ± 1% 14.81µ ± 0% -30.91% (p=0.000 n=20)
ListPostings/count=100000-16 209.4µ ± 1% 143.3µ ± 0% -31.55% (p=0.000 n=20)
ListPostings/count=1000000-16 2.086m ± 1% 1.436m ± 1% -31.18% (p=0.000 n=20)
geomean 29.02µ 21.41µ -26.22%
We're talking about microseconds here, but they just keep adding.
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
This avoids situations where metrics are scraped before the data they
are trying to look at is initialized.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Currently, the two goroutines race against each other and it's possible that the main test goroutine finishes way earlier than appendSeries has had a chance to run at all.
I tested this change by breaking the code that X fixed and running the race test 100 times. Without the additional time.Sleep the test failed 11 times. With the sleep it failed 65 out of the 100 runs. Which is still not ideal, but it's a step forward.
Signed-off-by: Dimitar Dimitrov <dimitar.dimitrov@grafana.com>
The test was introduced in # but was changed during the code review and not reran with the faulty code since then.
Closes #
Signed-off-by: Dimitar Dimitrov <dimitar.dimitrov@grafana.com>
Before cutting a new XOR chunk in case the chunk goes over the size
limit, check that the timestamp is in order and not equal or older
than the latest sample in the old chunk.
Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com>
TestHeadDetectsDuplcateSampleAtSizeLimit tests a regression where a
duplicate sample,is appended to the head, right when the head chunk is
at the size limit. The test adds all samples as duplicate, thus
expecting that the result has exactly half of the samples.
Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com>
Return annotations (warnings and infos) from PromQL queries
This generalizes the warnings we have already used before (but only for problems with remote read) as "annotations".
Annotations can be warnings or infos (the latter could be false positives). We do not treat them different in the API for now and return them all as "warnings". It would be easy to distinguish them and return infos separately, should that appear useful in the future.
The new annotations are then used to create a lot of warnings or infos during PromQL evaluations. Partially these are things we have wanted for a long time (e.g. inform the user that they have applied `rate` to a metric that doesn't look like a counter), but the new native histograms have created even more needs for those annotations (e.g. if a query tries to aggregate float numbers with histograms).
The annotations added here are not yet complete. A prominent example would be a warning about a range too short for a rate calculation. But such a warnings is more tricky to create with good fidelity and we will tackle it later.
Another TODO is to take annotations into account when evaluating recording rules.
---------
Signed-off-by: Jeanette Tan <jeanette.tan@grafana.com>
Case a) empty span is at the beginning of the spans.
Case b) two consequtive empty spans with positive offsets.
Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com>
* Benchmark WBL
Extended WAL benchmark test with WBL parts too - added basic cases for
OOO handling - a percentage of series have a percentage of samples set
as OOO ones.
Signed-off-by: Fiona Liao <fiona.y.liao@gmail.com>
* Fix handling of explicit counter reset header in histograms.
Explicit counter reset were being ignored.
Also there was no unit test coverage.
Add test case for the first sample in a chunk.
Add test case for non first sample in chunk.
Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com>
---------
Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com>
Otherwise we have a highly unusual situation of over 100 chunks
in the headChunks list of each series, which heavily skews
performance.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
promql: Extend testing framework to support native histograms
This includes both the internal testing framework as well as the rules unit test feature of promtool.
This also adds a bunch of basic tests. Many of the code level tests can now be converted to tests within the framework, and more tests can be added easily.
---------
Signed-off-by: Harold Dost <h.dost@criteo.com>
Signed-off-by: Gregor Zeitlinger <gregor.zeitlinger@grafana.com>
Signed-off-by: Stephen Lang <stephen.lang@grafana.com>
Co-authored-by: Harold Dost <h.dost@criteo.com>
Co-authored-by: Stephen Lang <stephen.lang@grafana.com>
Co-authored-by: Gregor Zeitlinger <gregor.zeitlinger@grafana.com>
`rand.Read` has been deprecated since Go 1.20
`crypto/rand.Read` is more appropriate
Ref: https://tip.golang.org/doc/go1.20
Signed-off-by: Michal Biesek <michalbiesek@gmail.com>
Add a chunk size limit in bytes
This creates a hard cap for XOR chunks of 1024 bytes.
The limit for histogram chunk is also 1024 bytes, but it is a soft limit as a histogram has a dynamic size, and even a single one could be larger than 1024 bytes.
This also avoids cutting new histogram chunks if the existing chunk has fewer than 10 histograms yet. In that way, we are accepting "jumbo chunks" in order to have at least 10 histograms in a chunk, allowing compression to kick in.
Signed-off-by: Justin Lei <justin.lei@grafana.com>
So far, `ValidateHistogram` would not detect if the count did not
include the count in the zero bucket. This commit fixes the problem
and updates all the tests that have been undetected offenders so far.
Note that this problem would only ever create false negatives, so we
never falsely rejected to store a histogram because of it.
On the other hand, `ValidateFloatHistogram` has been to strict with
the count being at least as large as the sum of the counts in all the
buckets. Float precision issues could create false positives here, see
products of PromQL evaluations, it's actually quite hard to put an
upper limit no the floating point imprecision. Users could produce the
weirdest expressions, maxing out float precision problems. Therefore,
this commit simply removes that particular check from
`ValidateFloatHistogram`.
Signed-off-by: beorn7 <beorn@grafana.com>
Simlar to cleanup of WAL files on startup, cleanup temporary
chunk_snapshot dirs. This prevents storage space leaks due to terminated
snapshots on shutdown.
Signed-off-by: SuperQ <superq@gmail.com>
When a particular SeriesLifecycleCallback tries to optimize and run
closer to the Head, keeping track of the HeadSeriesRef instead of the
labelsets, it's impossible to handle the PostDeletion callback properly
as there's no way to know which series refs were deleted from the head.
This changes the callback to provide the series refs alongside the
labelsets, so the implementation can choose what to do.
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
The most common case is to have a nil error when appending series, so
let's check that first instead of checking the 3 error types first.
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
Currently memSeries holds a single head chunk in-memory and a slice of mmapped chunks.
When append() is called on memSeries it might decide that a new headChunk is needed to use for given append() call.
If that happens it will first mmap existing head chunk and only after that happens it will create a new empty headChunk and continue appending
our sample to it.
Since appending samples uses write lock on memSeries no other read or write can happen until any append is completed.
When we have an append() that must create a new head chunk the whole memSeries is blocked until mmapping of existing head chunk finishes.
Mmapping itself uses a lock as it needs to be serialised, which means that the more chunks to mmap we have the longer each chunk might wait
for it to be mmapped.
If there's enough chunks that require mmapping some memSeries will be locked for long enough that it will start affecting
queries and scrapes.
Queries might timeout, since by default they have a 2 minute timeout set.
Scrapes will be blocked inside append() call, which means there will be a gap between samples. This will first affect range queries
or calls using rate() and such, since the time range requested in the query might have too few samples to calculate anything.
To avoid this we need to remove mmapping from append path, since mmapping is blocking.
But this means that when we cut a new head chunk we need to keep the old one around, so we can mmap it later.
This change makes memSeries.headChunk a linked list, memSeries.headChunk still points to the 'open' head chunk that receives new samples,
while older, yet to be mmapped, chunks are linked to it.
Mmapping is done on a schedule by iterating all memSeries one by one. Thanks to this we control when mmapping is done, since we trigger
it manually, which reduces the risk that it will have to compete for mmap locks with other chunks.
Signed-off-by: Łukasz Mierzwa <l.mierzwa@gmail.com>
If a new series is introduced in a storage.Appender instance, that
series should be written to the WAL once the storage.Appender is closed,
even on Rollback.
Previously, new series would only be written to the WAL when calling
Commit. However, because the series is stored in memory regardless,
subsequent calls to Commit may write samples to the WAL which reference
a series ID which that was never written.
Related to #11589. It's likely that this fix also resolves this issue,
but we need more testing from users to see if the problem persists after
this fix; there may be more cases where samples get written to the WAL
in Prometheus Agent mode without the corresponding series record.
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
This has become a requirement for native histograms, as a single
histogram sample commonly has many buckets, so that providing many
exemplars makes sense.
Since OM text doesn't support native histograms yet, the test had to
be expanded to also support protobuf test cases.
Signed-off-by: beorn7 <beorn@grafana.com>
Snappy remains as the default compression but there is now a flag to switch
the compression algorithm.
Signed-off-by: Justin Lei <justin.lei@grafana.com>
* Apply matchers when fetching label values
Signed-off-by: Patrick Oyarzun <patrick.oyarzun@grafana.com>
* Avoid extra copying of label values
Signed-off-by: Patrick Oyarzun <patrick.oyarzun@grafana.com>
---------
Signed-off-by: Patrick Oyarzun <patrick.oyarzun@grafana.com>
Use AppendableGauge to detect corrupt chunk with gauge histograms.
Detect if first sample is a gauge but the chunk is not set up to contain
gauge histograms.
Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com>
Signed-off-by: George Krajcsovits <krajorama@users.noreply.github.com>
Problem:
LabelValueStats - This will provide a list of the label names and memory used in bytes.
It is calculated by adding the length of all values for a given label name.
But internally Prometheus stores the name and the value independently for each series.
Solution:
MemPostings struct maintains the values to seriesRef map which is used
to get the number of series which contains the label values.
Using that LabelValueStats is calculated as: seriesCnt * len(value
name)
Signed-off-by: Baskar Shanmugam <baskar.shanmugam.career@gmail.com>
* WIP implement WAL watcher reading via notifications over a channel from
the TSDB code
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Notify via head appenders Commit (finished all WAL logging) rather than
on each WAL Log call
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Fix misspelled Notify plus add a metric for dropped Write notifications
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Update tests to handle new notification pattern
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* this test maybe needs more time on windows?
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* does this test need more time on windows as well?
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* read timeout is already a time.Duration
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* remove mistakenly commited benchmark data files
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* address some review feedback
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* fix missed changes from previous commit
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Fix issues from wrapper function
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* try fixing race condition in test by allowing tests to overwrite the
read ticker timeout instead of calling the Notify function
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* fix linting
Signed-off-by: Callum Styan <callumstyan@gmail.com>
---------
Signed-off-by: Callum Styan <callumstyan@gmail.com>
The code did not handle spans with 0 length properly.
Spans with length zero are now skipped in the comparison.
Span index check not done against length-1, since length is a unit32,
thus subtracting 1 leads to 2^32, not -1.
Fixes and unit tests for both integer and float histograms added.
Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com>
This changes usage of path to be replaced with path/filepath, allowing
for filepath.Base to properly return the base directory on systems where
`/` is not the standard path separator.
This resolves an issue on Windows where intermediate folders containing
a `.` were incorrectly considered to be a part of the checkpoint name.
Related to grafana/agent#3826.
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
`head.deleted` holds the WAL segment in use at the time each series was
removed from the head. At the end of `truncateWAL()` we will delete
all segments up to `last`, so we can drop any series that were last seen
in a segment at or before that point.
(same change in Prometheus Agent too)
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Wiser coders than myself have come to the conclusion that a `switch`
statement is almost always superior to a statement that includes any
`else if`.
The exceptions that I have found in our codebase are just these two:
* The `if else` is followed by an additional statement before the next
condition (separated by a `;`).
* The whole thing is within a `for` loop and `break` statements are
used. In this case, using `switch` would require tagging the `for`
loop, which probably tips the balance.
Why are `switch` statements more readable?
For one, fewer curly braces. But more importantly, the conditions all
have the same alignment, so the whole thing follows the natural flow
of going down a list of conditions. With `else if`, in contrast, all
conditions but the first are "hidden" behind `} else if `, harder to
spot and (for no good reason) presented differently from the first
condition.
I'm sure the aforemention wise coders can list even more reasons.
In any case, I like it so much that I have found myself recommending
it in code reviews. I would like to make it a habit in our code base,
without making it a hard requirement that we would test on the CI. But
for that, there has to be a role model, so this commit eliminates all
`if else` occurrences, unless it is autogenerated code or fits one of
the exceptions above.
Signed-off-by: beorn7 <beorn@grafana.com>
We haven't updated golint-ci in our CI yet, but this commit prepares
for that.
There are a lot of new warnings, and it is mostly because the "revive"
linter got updated. I agree with most of the new warnings, mostly
around not naming unused function parameters (although it is justified
in some cases for documentation purposes – while things like mocks are
a good example where not naming the parameter is clearer).
I'm pretty upset about the "empty block" warning to include `for`
loops. It's such a common pattern to do something in the head of the
`for` loop and then have an empty block. There is still an open issue
about this: https://github.com/mgechev/revive/issues/810 I have
disabled "revive" altogether in files where empty blocks are used
excessively, and I have made the effort to add individual
`// nolint:revive` where empty blocks are used just once or twice.
It's borderline noisy, though, but let's go with it for now.
I should mention that none of the "empty block" warnings for `for`
loop bodies were legitimate.
Signed-off-by: beorn7 <beorn@grafana.com>
In the past, every sample value was a float, so it was fine to call a
variable holding such a float "value" or "sample". With native
histograms, a sample might have a histogram value. And a histogram
value is still a value. Calling a float value just "value" or "sample"
or "V" is therefore misleading. Over the last few commits, I already
renamed many variables, but this cleans up a few more places where the
changes are more invasive.
Note that we do not to attempt naming in the JSON APIs or in the
protobufs. That would be quite a disruption. However, internally, we
can call variables as we want, and we should go with the option of
avoiding misunderstandings.
Signed-off-by: beorn7 <beorn@grafana.com>
Previously, we had one “polymorphous” `sample` type in the `storage`
package. This commit breaks it up into `fSample`, `hSample`, and
`fhSample`, each still implementing the `tsdbutil.Sample` interface.
This reduces allocations in `sampleRing.Add` but inflicts the penalty
of the interface wrapper, which makes things worse in total.
This commit therefore just demonstrates the step taken. The next
commit will tackle the interface overhead problem.
Signed-off-by: beorn7 <beorn@grafana.com>
It seems that readOnlyDB was still opened which blocked the temp dir
cleanup.
Also changed the copy dir to be another TempDir instead of manually
creating one.
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Use zeropool.Pool to workaround SA6002
I built a tiny library called https://github.com/colega/zeropool to
workaround the SA6002 staticheck issue.
While searching for the references of that SA6002 staticheck issues on
Github first results was Prometheus itself, with quite a lot of ignores
of it.
This changes the usages of `sync.Pool` to `zeropool.Pool[T]` where a
pointer is not available.
Also added a benchmark for HeadAppender Append/Commit when series
already exist, which is one of the most usual cases IMO, as I didn't find
any.
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Improve BenchmarkHeadAppender with more cases
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* A little copying is better than a little dependency
https://www.youtube.com/watch?v=PAAkCSZUG1c&t=9m28s
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Fix imports order
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Add license header
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Copyright should be on one of the first 3 lines
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Use require.Equal for testing
I don't depend on testify in my lib, but here we have it available.
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Avoid flaky test
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Also use zeropool for pointsPool in engine.go
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
---------
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
We need to make sure that `tsdb_errors.NewMulti` handles the errors.Is()
calls properly, like it's done in grafana/dskit.
Also we need to check that `errors.Is(err, context.Canceled)`, not that
`err == context.Canceled`.
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
Test that blocks are not marked as "compaction failed" during shutdown.
This shouldn't happen but this test currently fails.
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
It took a `Labels` where the memory could be re-used, but in practice
this hardly ever benefitted. Especially after converting `relabel.Process`
to `relabel.ProcessBuilder`.
Comparing the parameter to `nil` was a bug; `EmptyLabels` is not `nil`
so the slice was reallocated multiple times by `append`.
Lastly `Builder.Labels()` now estimates that the final size will depend
on labels added and deleted.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Adds an affirmative log message for successful WAL repair
Signed-off-by: Vernon Miller <vernon.miller@grafana.com>
Signed-off-by: Vernon Miller <96601789+aldernero@users.noreply.github.com>
Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>
Without this fix, if snapshots were enabled, and wbl goes missing
between restarts, then TSDB does not recognize that there are ooo
mmap chunks on disk and we cannot query them until those chunks
are compacted into blocks.
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
If the snapshot was enabled with some ooo mmap chunks on disk,
and wbl was removed between restarts, then we should still be able
to query the ooo mmap chunks after a restart. This test shows that
we are not able to query those ooo mmap chunks after a restart
under this situation.
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
M-map chunks replayed on startup are discarded if there
was no WAL and no snapshot loaded, because there is no
series created in the Head that it can map to. So only
load m-map chunks from disk if there is either a snapshot
loaded or there is WAL on disk.
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
Adds `WALReplayConcurrency` as an option on tsdb `Options` and `HeadOptions`.
If it is not set or set <=0, then `GOMAXPROCS` is used, which matches the previous behaviour.
Signed-off-by: Yuri Nikolic <durica.nikolic@grafana.com>
These benchmarks are all testing things related to what Prometheus does,
so perhaps have some historical interest, but we should not retain them
in the main repo.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
`safeChunk` is only obtained from the `headChunkReader.Chunk` call where
the chunk is already fetched and stored with the `safeChunk`. So, when
getting the iterator for the `safeChunk`, we don't need to get the chunk again.
Also removed a couple of unnecessary fields from `safeChunk` as a part of this.
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Export single ith test histogram generation functions
Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com>
* Do not set counter reset hint for non-gauge histograms individually
Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com>
* Apply suggestions from code review
Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>
Signed-off-by: George Krajcsovits <krajorama@users.noreply.github.com>
---------
Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com>
Signed-off-by: George Krajcsovits <krajorama@users.noreply.github.com>
Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>
This is a bit more conservative than we could be. As long as a chunk
isn't the first in a block, we can be pretty sure that the previous
chunk won't disappear. However, the incremental gain of returning
NotCounterReset in these cases is probably very small and might not be
worth the code complications.
Wwith this, we now also pay attention to an explicitly set counter
reset during ingestion. While the case doesn't show up in practice
yet, there could be scenarios where the metric source knows there was
a counter reset even if it might not be visible from the values in the
histogram. It is also useful for testing.
Signed-off-by: beorn7 <beorn@grafana.com>
- Adjust doc comments to go1.19 style.
- Break down some overly long lines.
- Minor doc comment tweaks and fixes.
- Some renaming.
Some rationales for the last point:
I have renamed “interjections” into “inserts”, mostly because it is
shorter, and the word shows up a lot by now (and the concept is
cryptic enough to not obfuscate it even more with abbreviations).
I have also tried to find more descriptive naming for the “compare
spans” functions.
Signed-off-by: beorn7 <beorn@grafana.com>
This is an optimization on the existing append in OOOChunk.
What we've been doing so far is find the place inside the out-of-order
slice where the new sample should go in and then place it there and move
any samples to the right if necessary. This is OK but requires a binary
search every time the slice is bigger than 0.
The optimization is opinionated and suggests that although out-of-order
samples can be out-of-order amongst themselves they'll probably be in
order thus we can probably optimistically append at the end and if not
do the binary search.
OOOChunks are capped to 30 samples by default so this is a small
optimization but everything adds up, specially if you handle many active
timeseries with out-of-order samples.
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
Signed-off-by: Jesus Vazquez <jesusvazquez@users.noreply.github.com>
Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>
* adapt code.go and write_handler.go to support float histograms
* adapt watcher.go to support float histograms
* wip adapt queue_manager.go to support float histograms
* address comments for metrics in queue_manager.go
* set test cases for queue manager
* use same counts for histograms and float histograms
* refactor createHistograms tests
* fix float histograms ref in watcher_test.go
* address PR comments
Signed-off-by: Marc Tuduri <marctc@protonmail.com>
This is to check if a gauge histogram can be appended to the given chunk.
If not, it tells what changes to make to the chunk and the histogram
if possible.
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
In the head and in v1 postings on disk, it makes no difference whether
postings are sorted. Only for v2 does the code step through in order.
So, move the sorting to where it is required, and thus skip it entirely
in the head.
Label values in on-disk blocks are already sorted, but `slices.Sort` is
very fast on already-sorted data so we don't bother checking.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
This allocates memory for all the returned values, which skews the
result. We aren't trying to benchmark `ExpandPostings`, so just step
through all the values without storing them to consume them.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Previously all the postings constructed were consumed on the first
iteration, so subsequent iterations did no work.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Extends Appender.AppendHistogram function to accept the FloatHistogram. TSDB supports appending, querying, WAL replay, for this new type of histogram.
Signed-off-by: Marc Tudurí <marctc@protonmail.com>
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>
Instead of passing in a `ScratchBuilder` and `Labels`, just pass the
builder and the caller can extract labels from it. In many cases the
caller didn't use the Labels value anyway.
Now in `Labels.ScratchBuilder` we need a slightly different API: one
to assign what will be the result, instead of overwriting some other
`Labels`. This is safer and easier to reason about.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Implement decoding via labels.ScratchBuilder, which we retain and re-use
to reduce memory allocations.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
This necessitates a change to the `tsdb.IndexReader` interface:
`index.Reader` is used from multiple goroutines concurrently, so we
can't have state in it.
We do retain a `ScratchBuilder` in `blockBaseSeriesSet` which is
iterator-like.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Use simpler utility function to create Labels objects, making fewer
assumptions about the data structure.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Re-use previous memory if it is already of the correct type.
In `NewListSeries` we hoist the conversion to an interface value out
so it only allocates once.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Re-use previous memory if it is already of the correct type.
Also turn two levels of function closure into a single object that
holds the required data.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Patterned after `Chunk.Iterator()`: pass the old iterator in so it
can be re-used to avoid allocating a new object.
(This commit does not do any re-use; it is just changing all the method
signatures so re-use is possible in later commits.)
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
This adds negative buckets and access of float histograms to
TestHistogramChunkSameBuckets and TestHistogramChunkBucketChanges.
It also exercises a specific pattern of reusing an iterator (one where
no access has happened).
This exposes two bugs (where entries for positive buckets where used
where the corresponding entries for negative buckets should have been
used). One was fixed in #11627 (not merged), which triggered the work
in this commit.
This commit fixes both issues, so #11627 can be closed.
It also simplifies the code in the histogramIterator.Next method that
aims to recycle existing slice capacity.
Furthermore, this is on top of the release-2.40 branch because we
should probably cut a bugfix release for this.
Signed-off-by: beorn7 <beorn@grafana.com>
Typical parameters are one hour by 1 minute step, where the
function would allocate a slice of 3.6 million samples instead of 60.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Switch from 'sanity' to more inclusive lanuage
"Removing ableist language in code is important; it helps to create and
maintain an environment that welcomes all developers of all backgrounds,
while emphasizing that we as developers select the most articulate,
precise, descriptive language we can rather than relying on metaphors.
The phrase sanity check is ableist, and unnecessarily references mental
health in our code bases. It denotes that people with mental illnesses
are inferior, wrong, or incorrect, and the phrase sanity continues to be
used by employers and other individuals to discriminate against these
people."
From https://gist.github.com/seanmhanson/fe370c2d8bd2b3228680e38899baf5cc
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Inverting the test for chunks deleted by tombstones makes all three
rejections consistent, and also avoids the case where a chunk is
excluded but still causes `trimFront` or `trimBack` to be set.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
This reduces garbage, hence goes faster, when a short time range is
required compared to the amount of chunks in the block. For example
recording rules and alerts often look only at the last few minutes.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Add BenchmarkOpenBlock
* Use specific types when reading offset table
Instead of reading a generic-ish []string, we can read a generic type
which would be specifically labels.Label.
This avoid allocating a slice that escapes to the heap, making it both
faster and more efficient in terms of memory management.
* Update error message for unexpected number of keys
* s/posting offset table/postings offset table/
* Remove useless lastKey assignment
* Use two []bytes vars, simplify
Applied PR feedback: removed generics, moved the label indices reading
to that specific test as we're not using it in production anyway, we're
just testing what we've just built.
Also using two []bytes variables for name and value that use the backing
buffer instead of using strings, this reduces allocations a lot as we
only copy them when we store them (this is optimized by the compiler).
* Fix the dumb bug
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
Co-authored-by: Marco Pracucci <marco@pracucci.com>
Function arguments in defer evaluated during definition of defer, not
during execution
Signed-off-by: Slavik Panasovets <slavik@google.com>
Signed-off-by: Slavik Panasovets <slavik@google.com>
With these changes, the "happy path" when the leading and trailing
number of bits don't need an update, fewer operations are needed.
The change is probably very marginal (no change in the benchmark added
here, but the benchmark also doesn't cover non-changing values), and
an argument could me made that avoiding pointers also has its
benefits.
However, I think that reducing the number of return values improves
readability. Which convinced me that I should at least propose this.
Signed-off-by: beorn7 <beorn@grafana.com>
The wlog.WL type can now be used to create a Write Ahead Log or a Write
Behind Log.
Before the prefix for wbl metrics was
'prometheus_tsdb_out_of_order_wal_' and has been replaced with
'prometheus_tsdb_out_of_order_wbl_'.
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
Signed-off-by: Jesus Vazquez <jesusvazquez@users.noreply.github.com>
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
This call was added by PR #11075 merged before #11318 which changed all
similar calls to `sort.Sort` into a faster one.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Use new experimental package `golang.org/x/exp/slices`.
slices.Sort works on values that are directly comparable, like ints,
so avoids the overhad of an interface call to `.Less()`.
Left tests unchanged, because they don't need the speed and it may be
a cross-check that slices.Sort gives the same answer.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Use new experimental package `golang.org/x/exp/slices`.
Some of the speedup comes from comparing SeriesRef (which is an int64)
directly rather than through an interface `.Less()` call; some comes
from exp/slices using "pattern-defeating quicksort(pdqsort)".
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* tsdb/agent: fix application of defaults
MaxTS was being incorrectly constrained to the truncation interval
* add more tests to check validation
* force MaxWALTime = MinWALTime if min > max
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* TSDB chunks: remove race between writing and reading
Because the data is stored as a bit-stream, the last byte in the stream
could change if the stream is appended to after an Iterator is obtained.
Copy the last byte when the Iterator is created, so we don't have to
read it later.
Clarify in comments that concurrent Iterator and Appender are allowed,
but the chunk must not be modified while an Iterator is created.
(This was already the case, in order to copy the bstream slice header.)
* TSDB: stop saving last 4 samples in memSeries
This extra copy of the last 4 samples was introduced to avoid a race
condition between reading the last byte of the chunk and writing to it.
But now we have fixed that by having `bstreamReader` copy the last byte,
we don't need to copy the last 4 samples.
This change saves 56 bytes per series, which is very worthwhile when
you have millions or tens of millions of series.
* TSDB: tidy up stopIterator re-use
Previous changes have left this code duplicating some lines; pull
them out to a separate function and tidy up.
* TSDB head_test: stop checking when iterators are wrapped
The behaviour has changed so chunk iterators are only wrapped when
transaction isolation requires them to stop short of the end.
This makes tests fail which are checking the type.
Tests should check the observable behaviour, not the type.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>
* tsdb: add a basic test for read/write isolation
* tsdb: store the min time with isolationAppender
So that we can see when appending has moved past a certain point in time.
* tsdb: allow RangeHead to have isolation disabled
This will be used when for head compaction.
* tsdb: do head compaction with isolation disabled
This saves a lot of work tracking appends done while compaction is ongoing.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* tsdb: remove chunkRange from memSeries
chunkRange is the (oddly-named) configured duration for the head block.
We don't need a copy of this value per series. Pass it down where
required, and remove the copy.
The value in `Head` is only updated in `resetInMemoryState()`, which
also discards all `memSeries`.
* tsdb: remove oooCapMax from memSeries
oooCapMax is the configured maximum capacity for an out-of-order chunk.
Storing it per-series uses extra memory, and has surprising behaviour
if users change the value in config - series created before the change
will keep their old value.
Instead, pass it down where required, and remove the per-series value.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Introduce out-of-order TSDB support
This implementation is based on this design doc:
https://docs.google.com/document/d/1Kppm7qL9C-BJB1j6yb6-9ObG3AbdZnFUBYPNNWwDBYM/edit?usp=sharing
This commit adds support to accept out-of-order ("OOO") sample into the TSDB
up to a configurable time allowance. If OOO is enabled, overlapping querying
are automatically enabled.
Most of the additions have been borrowed from
https://github.com/grafana/mimir-prometheus/
Here is the list ist of the original commits cherry picked
from mimir-prometheus into this branch:
- 4b2198d7ec
- 2836e5513f
- 00b379c3a5
- ff0dc75758
- a632c73352
- c6f3d4ab33
- 5e8406a1d4
- abde1e0ba1
- e70e769889
- df59320886
Co-authored-by: Jesus Vazquez <jesus.vazquez@grafana.com>
Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>
Co-authored-by: Dieter Plaetinck <dieter@grafana.com>
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* gofumpt files
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Add license header to missing files
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Fix OOO tests due to existing chunk disk mapper implementation
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Fix truncate int overflow
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Add Sync method to the WAL and update tests
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* remove useless sync
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Update minOOOTime after truncating Head
* Update minOOOTime after truncating Head
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Fix lint
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Add a unit test
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Load OutOfOrderTimeWindow only once per appender
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Fix OOO Head LabelValues and PostingsForMatchers
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Fix replay of OOO mmap chunks
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Remove unnecessary err check
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Prevent panic with ApplyConfig
Signed-off-by: Ganesh Vernekar 15064823+codesome@users.noreply.github.com
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Run OOO compaction after restart if there is OOO data from WBL
Signed-off-by: Ganesh Vernekar 15064823+codesome@users.noreply.github.com
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Apply Bartek's suggestions
Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com>
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Refactor OOO compaction
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Address comments and TODOs
- Added a comment explaining why we need the allow overlapping
compaction toggle
- Clarified TSDBConfig OutOfOrderTimeWindow doc
- Added an owner to all the TODOs in the code
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Run go format
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Fix remaining review comments
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Fix tests
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Change wbl reference when truncating ooo in TestHeadMinOOOTimeUpdate
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
* Fix TestWBLAndMmapReplay test failure on windows
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Address most of the feedback
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Refactor the block meta for out of order
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Fix windows error
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Fix review comments
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
Signed-off-by: Jesus Vazquez <jesus.vazquez@grafana.com>
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
Signed-off-by: Ganesh Vernekar 15064823+codesome@users.noreply.github.com
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>
Co-authored-by: Dieter Plaetinck <dieter@grafana.com>
Co-authored-by: Oleg Zaytsev <mail@olegzaytsev.com>
Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com>
If some shards did not get any samples mapped, the buffer will be empty
so sending it over the chan to `processWALSamples()` is a waste of time.
This is especially likely now we are checking `minValidTime` before
sending.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
The chunk pool belongs to the head not to the series. Pass it down where
required, and remove the copy of the pointer that `memSeries` was
holding.
`safeChunk` also needs to hold it, because in scenarios where it is used
we don't have a reference to the head. However it was already holding
`chunkDiskMapper` for the same reason, so no big change.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
There's no point splitting a sample onto the right shard and checking
if the series needs to be re-mapped, if we're only going to discard it
once it arrives at `ProcessWALSamples()`. Simply discard it earlier.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Add runtime config to control native histogram ingestion
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Make the config into a CLI flag
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
I find it useful to know why a restriction exists, to check whether that
reason still applies, or in which other places it might apply.
This is based on the note here:
https://github.com/prometheus/prometheus/pull/9270#pullrequestreview-743820956
on the PR where the original comment was added.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Update go to 1.19, set min version to 1.18
Signed-off-by: Julien Pivotto <roidelapluie@o11y.eu>
* Update golangci-lint
Signed-off-by: Julien Pivotto <roidelapluie@o11y.eu>
Signed-off-by: Julien Pivotto <roidelapluie@o11y.eu>
Metadata was added recently but doesn't seem to be used much, at least as far as I could identify.
Yet it's part of memSeries struct and so even when empty takes 48 bytes,
which is a lot given that without it memSeries requires 224 bytes.
This change turns it into a pointer on the struct, that get set only when metadata is actually set of given series.
Signed-off-by: Łukasz Mierzwa <l.mierzwa@gmail.com>
Signed-off-by: Łukasz Mierzwa <l.mierzwa@gmail.com>
* Add histogram validation
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Correct negative offset validation
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Address review comments
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Validation benchmark
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Add more checks
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Attempt to fix tests
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Fix stuff
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* tsdb/record: Extract functions to encode and decode labels
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* tsdb: make use of Encode/Decode Labels
Simplify the code by re-using routines from tsdb/record.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Append metadata to the WAL
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Remove extra whitespace; Reword some docstrings and comments
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Use RLock() for hasNewMetadata check
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Use single byte for metric type in RefMetadata
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Update proposed WAL format for single-byte type metadata
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Implementa MetadataAppender interface for the Agent
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Address first round of review comments
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Amend description of metadata in wal.md
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Correct key used to retrieve metadata from cache
When we're setting metadata entries in the scrapeCace, we're using the
p.Help(), p.Unit(), p.Type() helpers, which retrieve the series name and
use it as the cache key. When checking for cache entries though, we used
p.Series() as the key, which included the metric name _with_ its labels.
That meant that we were never actually hitting the cache. We're fixing
this by utiling the __name__ internal label for correctly getting the
cache entries after they've been set by setHelp(), setType() or
setUnit().
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Put feature behind a feature flag
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix AppendMetadata docstring
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Reorder WAL format document
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Change error message of AppendMetadata; Fix access of s.meta in AppendMetadata
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Reuse temporary buffer in Metadata encoder
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Only keep latest metadata for each refID during checkpointing
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix test that's referencing decoding metadata
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Avoid creating metadata block if no new metadata are present
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Add tests for corrupt metadata block and relevant record type
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix CR comments
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Extract logic about changing metadata in an anonymous function
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Implement new proposed WAL format and amend relevant tests
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Use 'const' for metadata field names
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Apply metadata to head memSeries in Commit, not in AppendMetadata
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Add docstring and rename extracted helper in scrape.go
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Add tests for tsdb-related cases
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix linter issues vol1
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix linter issues vol2
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix Windows test by closing WAL reader files
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Use switch instead of two if statements in metadata decoding
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix review comments around TestMetadata* tests
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Add code for replaying WAL; test correctness of in-memory data after a replay
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Remove scrape-loop related code from PR
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Address first round of comments
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Simplify tests by sorting slices before comparison
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix test to use separate transactions
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Empty out buffer and record slices after encoding latest metadata
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix linting issue
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Update calculation for DroppedMetadata metric
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Rename MetadataAppender interface and AppendMetadata method to MetadataUpdater/UpdateMetadata
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Reuse buffer when encoding latest metadata for each series
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix review comments; Check all returned error values using two helpers
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Simplify use of helpers
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Satisfy linter
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Add exemplar record case
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* recordType() -> Type.String()
Signed-off-by: Levi Harrison <git@leviharrison.dev>
Previously, the maxTime wasn't updated properly in case of a recoding
happening.
My apologies for reformatting many lines for line length. During the
bug hunt, I tried to make things more readable in a reasonably wide
editor window.
Signed-off-by: beorn7 <beorn@grafana.com>
Previously, the maxTime wasn't updated properly in case of a recoding
happening.
My apologies for reformatting many lines for line length. During the
bug hunt, I tried to make things more readable in a reasonably wide
editor window.
Signed-off-by: beorn7 <beorn@grafana.com>
