* A registerer is passed to the scrape Manager,
and all scrape metrics register with it.
* For now the registry which we pass to the scrape
Manager is still the global one.
Signed-off-by: Paulin Todev <paulin.todev@gmail.com>
* Added ability to specify scrape protocols to accept during HTTP content type negotiation.
This is done via new option in GlobalConfig and ScrapeConfig: "scrape_protocol"
Signed-off-by: bwplotka <bwplotka@gmail.com>
* Fixed readability and log message.
Signed-off-by: bwplotka <bwplotka@gmail.com>
---------
Signed-off-by: bwplotka <bwplotka@gmail.com>
It's possible (quite common on Kubernetes) to have a service discovery
return thousands of targets then drop most of them in relabel rules.
The main place this data is used is to display in the web UI, where
you don't want thousands of lines of display.
The new limit is `keep_dropped_targets`, which defaults to 0
for backwards-compatibility.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
In digital communication, "jitter" usually refers to how much a signal deviates
from true periodicity, see https://en.wikipedia.org/wiki/Jitter. The way we are
using the "jitterSeed" in Prometheus does not affect the true periodicity at
all, but just introduces a constant phase shift (or offset) within the period.
So it would be more correct and less confusing to call the "jitterSeed" an
"offsetSeed" instead.
Signed-off-by: Julius Volz <julius.volz@gmail.com>
Wiser coders than myself have come to the conclusion that a `switch`
statement is almost always superior to a statement that includes any
`else if`.
The exceptions that I have found in our codebase are just these two:
* The `if else` is followed by an additional statement before the next
condition (separated by a `;`).
* The whole thing is within a `for` loop and `break` statements are
used. In this case, using `switch` would require tagging the `for`
loop, which probably tips the balance.
Why are `switch` statements more readable?
For one, fewer curly braces. But more importantly, the conditions all
have the same alignment, so the whole thing follows the natural flow
of going down a list of conditions. With `else if`, in contrast, all
conditions but the first are "hidden" behind `} else if `, harder to
spot and (for no good reason) presented differently from the first
condition.
I'm sure the aforemention wise coders can list even more reasons.
In any case, I like it so much that I have found myself recommending
it in code reviews. I would like to make it a habit in our code base,
without making it a hard requirement that we would test on the CI. But
for that, there has to be a role model, so this commit eliminates all
`if else` occurrences, unless it is autogenerated code or fits one of
the exceptions above.
Signed-off-by: beorn7 <beorn@grafana.com>
* Add API endpoints for getting scrape pool names
This adds api/v1/scrape_pools endpoint that returns the list of *names* of all the scrape pools configured.
Having it allows to find out what scrape pools are defined without having to list and parse all targets.
The second change is adding scrapePool query parameter support in api/v1/targets endpoint, that allows to
filter returned targets by only finding ones for passed scrape pool name.
Both changes allow to query for a specific scrape pool data, rather than getting all the targets for all possible scrape pools.
The problem with api/v1/targets endpoint is that it returns huge amount of data if you configure a lot of scrape pools.
Signed-off-by: Łukasz Mierzwa <l.mierzwa@gmail.com>
* Add a scrape pool selector on /targets page
Current targets page lists all possible targets. This works great if you only have a few scrape pools configured,
but for systems with a lot of scrape pools and targets this slow things down a lot.
Not only does the /targets page load very slowly in such case (waiting for huge API response) but it also take
a long time to render, due to huge number of elements.
This change adds a dropdown selector so it's possible to select only intersting scrape pool to view.
There's also scrapePool query param that will open selected pool automatically.
Signed-off-by: Łukasz Mierzwa <l.mierzwa@gmail.com>
Signed-off-by: Łukasz Mierzwa <l.mierzwa@gmail.com>
* Append metadata to the WAL
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Remove extra whitespace; Reword some docstrings and comments
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Use RLock() for hasNewMetadata check
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Use single byte for metric type in RefMetadata
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Update proposed WAL format for single-byte type metadata
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Address first round of review comments
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Amend description of metadata in wal.md
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Correct key used to retrieve metadata from cache
When we're setting metadata entries in the scrapeCace, we're using the
p.Help(), p.Unit(), p.Type() helpers, which retrieve the series name and
use it as the cache key. When checking for cache entries though, we used
p.Series() as the key, which included the metric name _with_ its labels.
That meant that we were never actually hitting the cache. We're fixing
this by utiling the __name__ internal label for correctly getting the
cache entries after they've been set by setHelp(), setType() or
setUnit().
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Put feature behind a feature flag
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Reorder WAL format document
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix CR comments
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Extract logic about changing metadata in an anonymous function
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Implement new proposed WAL format and amend relevant tests
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Use 'const' for metadata field names
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Apply metadata to head memSeries in Commit, not in AppendMetadata
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Add docstring and rename extracted helper in scrape.go
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Fix review comments around TestMetadata* tests
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Rebase with merged TSDB changes; fix duplicate definitions after rebase
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Remove leftover changes on db_test.go
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Rename feature flag
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Simplify updateMetadata helper function
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Remove extra newline
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
Signed-off-by: Paschalis Tsilias <paschalist0@gmail.com>
* Send target and metadata cache in context (again)
The previous attempt was rolled back in #10590 due to memory issues.
`sl.parentCtx` and `sl.ctx` both had a copy of the cache and target info
in the previous attempt and it was hard to pin-point where the context
was being retained causing the memory increase.
I've experimented a bunch in #10627 to figure out that this approach doesn't
cause memory increase. Beyond that, just using this info in _any_ other context
is causing a memory increase.
The change fixed a bunch of long-standing in the OTel Collector that the
community was waiting on and release is blocked on a few downstream distrubutions
of OTel Collector waiting on a fix. I propose to merge this change in while
I investigate what is happening.
Signed-off-by: Goutham Veeramachaneni <gouthamve@gmail.com>
* Gate the change behind a manager option
Signed-off-by: Goutham Veeramachaneni <gouthamve@gmail.com>
* discovery: expose HTTP client options to discoverers
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* discovery/http: use HTTP client options for created client
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* scrape: use a list of HTTP client options instead of just dial context
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* discovery: rephrase comment
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* scrape: allow providing a custom Dialer for scraping
This commit extends config.ScrapeConfig with an optional field to
override how HTTP connections to targets are created. This field is not
set directly in Prometheus, and is only added for the convenience of
downstream importers.
Closes#9706
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* scrape: move custom dial function to scrape.Options
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
This creates a new `model` directory and moves all data-model related
packages over there:
exemplar labels relabel rulefmt textparse timestamp value
All the others are more or less utilities and have been moved to `util`:
gate logging modetimevfs pool runtime
Signed-off-by: beorn7 <beorn@grafana.com>
Add a new built-in metric `scrape_timeout_seconds` to allow monitoring
of the ratio of scrape duration to the scrape timeout. Hide behind a
feature flag to avoid additional cardinality by default.
Signed-off-by: SuperQ <superq@gmail.com>
This is part of https://github.com/prometheus/prometheus/pull/5882 that can be done to simplify things.
All todos I added will be fixed in follow up PRs.
* querier.Querier, querier.Appender, querier.SeriesSet, and querier.Series interfaces merged
with storage interface.go. All imports that.
* querier.SeriesIterator replaced by chunkenc.Iterator
* Added chunkenc.Iterator.Seek method and tests for xor implementation (?)
* Since we properly handle SelectParams for Select methods I adjusted min max
based on that. This should help in terms of performance for queries with functions like offset.
* added Seek to deletedIterator and test.
* storage/tsdb was removed as it was only a unnecessary glue with incompatible structs.
No logic was changed, only different source of abstractions, so no need for benchmarks.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
i) Uses the more idiomatic Wrap and Wrapf methods for creating nested errors.
ii) Fixes some incorrect usages of fmt.Errorf where the error messages don't have any formatting directives.
iii) Does away with the use of fmt package for errors in favour of pkg/errors
Signed-off-by: tariqibrahim <tariq181290@gmail.com>
* scrape: Add global jitter for HA server
Covers issue in https://github.com/prometheus/prometheus/pull/4926#issuecomment-449039848
where the HA setup become a problem for targets unable to be scraped simultaneously.
The new jitter per server relies on the hostname and external labels which necessarily to be uniq.
As before, scrape offset will be calculated with regard the absolute time, so even
restart/reload doesn't change scrape time per scrape target + prometheus instance.
Use fqdn if possible, otherwise fall back to the hostname. It adds extra random seed
to calculate server hash to be distinguish on machines with the same hostname, but
different DC.
Signed-off-by: Aleksei Semiglazov <xjewer@gmail.com>
* scrape: catch errors when creating HTTP clients
This change makes sure that no scrape pool is created with a nil HTTP
client.
Signed-off-by: Simon Pasquier <spasquie@redhat.com>
* Address Tariq's comment
Signed-off-by: Simon Pasquier <spasquie@redhat.com>
* Address Brian's comment
Signed-off-by: Simon Pasquier <spasquie@redhat.com>
The scrape manage receiver's channel now just saves the target sets
and another backgorund runner updates the scrape loops every 5 seconds.
This is so that the scrape manager doesn't block the receiving channel
when it does the long background reloading of the scrape loops.
Active and dropped targets are now saved in each scrape pool instead of
the scrape manager. This is mainly to avoid races when getting the
targets via the web api.
When reloading the scrape loops now happens in parallel to speed up the
final disared state and this also speeds up the prometheus's shutting
down.
Also updated some funcs signatures in the web package for consistency.
Signed-off-by: Krasi Georgiev <kgeorgie@redhat.com>
This adds a per-target cache of scraped metadata. The metadata is only
available for the lifecycle of the attached target. An API endpoint allows
to select metadata by metric name and a label selection of targets.
Signed-off-by: Fabian Reinartz <freinartz@google.com>
Fix race by properly locking access to scrape pools. Use separate mutex for information needed by UI so that UI isn't blocked when targets are being updated.
