Commit graph

281 commits

Author SHA1 Message Date
Fabian Reinartz ca2b68889b Merge branch 'master' into dev-2.0 2017-06-23 13:15:44 +02:00
Fabian Reinartz f46a8e9ea4 Merge pull request #2854 from prometheus/promql-rune
Check for invalid utf-8 in lexer strings.
2017-06-17 14:42:20 +02:00
Goutham Veeramachaneni d407bd150c Consolidate the duration params in CLI
* All CLI params moved to model.Duration

Signed-off-by: Goutham Veeramachaneni <cs14btech11014@iith.ac.in>
2017-06-16 20:20:57 +05:30
Brian Brazil 6f5d952132 Check for invalid utf-8 in lexer strings.
This protects against invalid utf-8 sneaking
in via label_replace.
2017-06-16 15:19:24 +01:00
Harsh Agarwal 16867c89a7 implement label_join issue 1147 (#2806)
Replace OptionalArgs int with Variadic int.
2017-06-16 14:51:22 +01:00
Goutham Veeramachaneni 507790a357
Rework logging to use explicitly passed logger
Mostly cleaned up the global logger use. Still some uses in discovery
package.

Signed-off-by: Goutham Veeramachaneni <cs14btech11014@iith.ac.in>
2017-06-16 15:52:44 +05:30
Goutham Veeramachaneni baf5b0f0fc Fix error where we look into the future. (#2829)
* Fix error where we look into the future.

So currently we are adding values that are in the future for an older
timestamp. For example, if we have [(1, 1), (150, 2)] we will end up
showing [(1, 1), (2,2)].

Further it is not advisable to call .At() after Next() returns false.

Signed-off-by: Goutham Veeramachaneni <cs14btech11014@iith.ac.in>

* Retuen early if done

Signed-off-by: Goutham Veeramachaneni <cs14btech11014@iith.ac.in>

* Handle Seek() where we reach the end of iterator

Signed-off-by: Goutham Veeramachaneni <cs14btech11014@iith.ac.in>

* Simplify code

Signed-off-by: Goutham Veeramachaneni <cs14btech11014@iith.ac.in>
2017-06-13 07:22:27 +02:00
Brian Brazil 220e78b9c3 Consider a series stale after 4.1 intervals with no data.
To cover the cases where stale markers may not be available,
we need to infer the interval and mark series stale based on that.
As we're lacking stale markers this is less accurate, however
it should be good enough for these cases.

We need 4 intervals as if say we had data at t=0 and t=10,
coming via federation. The next data point should be at t=20 however it
could take up to t=30 for it actually to be ingested, t=40 for it to be
scraped via federation and t=50 for it to be ingested.
We then add 10% on to that for slack, as we do elsewhere.
2017-05-24 14:27:17 +01:00
Brian Brazil c02c25d5ba Allow peeking back further in buffer. 2017-05-24 14:27:17 +01:00
Brian Brazil a5cf25743c Move stalness check into a function 2017-05-16 18:33:51 +01:00
Brian Brazil 80b40e6d91 Add initial staleness handing to promql.
For instant vectors, if "stale" is the newest sample
ignore the timeseries.

For range vectors, filter out "stale" samples.

Make it possible to inject "stale" samples in promql tests.
2017-05-16 18:33:51 +01:00
Fabian Reinartz 6e804b3497 Merge branch 'master' into dev-2.0 2017-05-12 13:29:58 +02:00
Brian Brazil fcc88f0e1e query/query_range should return eval timestamp
Query and query_range should return the timestamp
at which an evaluation is performed, not the timestamp
of the data. This is as that's what query range asked
for, and we need to keep query consistent with that.

Query for a matrix remains unchanged, returning the literal
matrix.
2017-05-12 12:00:31 +01:00
Brian Brazil 517b81f927 Add timestamp() function.
Make the timestamp of instant vectors be the timestamp of the sample
rather than the evaluation. We were not using this anywhere, so this is
safe.

Add a function to return the timestamp of samples in an instant vector.

Fixes #1557
2017-05-12 12:00:31 +01:00
Tom Wilkie 4d9b917d11 Instrument Prometheus with OpenTracing (#2554)
* Use request.Context() instead of a global map of contexts.

* Add some basic opentracing instrumentation on the query path.

* Remove tracehandler endpoint.
2017-05-02 18:49:29 -05:00
Fabian Reinartz 0f3110487d Merge remote-tracking branch 'origin/dev-2.0' into dev-2.0 2017-04-27 10:25:04 +02:00
Fabian Reinartz 73b8ff0ddc Merge branch 'master' into dev-2.0 2017-04-27 10:19:55 +02:00
Brian Brazil 5c9a6ce747 Add license to files.
This should fix CI for dev-2.0.
2017-04-19 13:46:22 +01:00
Jack Neely 896f951e68 Force buckets in a histogram to be monotonic for quantile estimation (#2610)
* Force buckets in a histogram to be monotonic for quantile estimation

The assumption that bucket counts increase monotonically with increasing
upperBound may be violated during:

  * Recording rule evaluation of histogram_quantile, especially when rate()
     has been applied to the underlying bucket timeseries.
  * Evaluation of histogram_quantile computed over federated bucket
     timeseries, especially when rate() has been applied

This is because scraped data is not made available to RR evalution or
federation atomically, so some buckets are computed with data from the N
most recent scrapes, but the other buckets are missing the most recent
observations.

Monotonicity is usually guaranteed because if a bucket with upper bound
u1 has count c1, then any bucket with a higher upper bound u > u1 must
have counted all c1 observations and perhaps more, so that c  >= c1.

Randomly interspersed partial sampling breaks that guarantee, and rate()
exacerbates it. Specifically, suppose bucket le=1000 has a count of 10 from
4 samples but the bucket with le=2000 has a count of 7, from 3 samples. The
monotonicity is broken. It is exacerbated by rate() because under normal
operation, cumulative counting of buckets will cause the bucket counts to
diverge such that small differences from missing samples are not a problem.
rate() removes this divergence.)

bucketQuantile depends on that monotonicity to do a binary search for the
bucket with the qth percentile count, so breaking the monotonicity
guarantee causes bucketQuantile() to return undefined (nonsense) results.

As a somewhat hacky solution until the Prometheus project is ready to
accept the changes required to make scrapes atomic, we calculate the
"envelope" of the histogram buckets, essentially removing any decreases
in the count between successive buckets.

* Fix up comment docs for ensureMonotonic

* ensureMonotonic: Use switch statement

Use switch statement rather than if/else for better readability.
Process the most frequent cases first.
2017-04-14 16:21:49 +02:00
Tom Wilkie f0e8a5f37c Add promql.ErrStorage, which is interpreted by the API as a 500. 2017-04-06 14:41:23 +01:00
Fabian Reinartz c389193b37 Merge branch 'master' into dev-2.0 2017-03-17 16:27:07 +01:00
Fabian Reinartz 0ecd205794 promql: Use buffer pool for matrix allocations 2017-03-14 10:57:34 +01:00
Fabian Reinartz b09b90a940 Correctly close querier on error, revendor tsdb 2017-03-09 15:40:52 +01:00
Goutham Veeramachaneni 6634984a38
Comments and Typo Fixes 2017-03-06 17:16:37 +05:30
Fabian Reinartz 9304179ef7 Merge branch 'master' into dev-2.0 2017-03-02 08:16:58 +01:00
Alex Somesan 18cd7246b5 Instrument query engine timings (#2418)
* Instrument query engine statistics
2017-02-13 16:45:00 +00:00
Fabian Reinartz 5772f1a7ba retrieval/storage: adapt to new interface
This simplifies the interface to two add methods for
appends with labels or faster reference numbers.
2017-02-02 13:05:46 +01:00
Fabian Reinartz 1d3cdd0d67 Merge branch 'master' into dev-2.0-rebase 2017-01-30 17:43:01 +01:00
Fabian Reinartz 035976b275 retrieval: handle not found error correctly 2017-01-20 11:27:01 +01:00
Fabian Reinartz ad9bc62e4c storage: extend appender and adapt it 2017-01-13 14:48:01 +01:00
André Carvalho c43dfaba1c Add max concurrent and current queries engine metrics (#2326)
* Add max concurrent and current queries engine metrics

This commit adds two metrics to the promql/engine: the
number of max concurrent queries, as configured by the flag, and
the number of current queries being served+blocked in the engine.
2017-01-07 14:41:25 +00:00
Fabian Reinartz bc20d93f0a storage: rename iterator value getters to At() 2017-01-02 13:33:37 +01:00
Fabian Reinartz 28f547bcc7 api/v1: fix tests, restore series queries 2016-12-30 10:43:44 +01:00
Fabian Reinartz e94b0899ee rules: fix tests, remove model types 2016-12-29 17:31:14 +01:00
Fabian Reinartz f8fc1f5bb2 *: migrate ingestion to new batch Appender 2016-12-29 11:03:56 +01:00
Fabian Reinartz 71fe0c58a8 promql: misc fixes 2016-12-28 11:32:15 +01:00
Fabian Reinartz fecf9532b9 *: fix misc compile errors 2016-12-25 11:42:57 +01:00
Fabian Reinartz 0492ddbd4d *: fully decouple tsdb, add new storage interfaces 2016-12-25 01:43:22 +01:00
Fabian Reinartz 9ea10d5265 promql: use labels.Builder to modify labels 2016-12-24 14:35:24 +01:00
Fabian Reinartz c6cd998905 promql: use local labels, add conversion 2016-12-24 14:01:37 +01:00
Fabian Reinartz ff504af2aa promql: undo accidental exports 2016-12-24 11:41:37 +01:00
Fabian Reinartz 6dedf89cc3 promql: rename SampleStream to Series 2016-12-24 11:32:42 +01:00
Fabian Reinartz c5f225b920 promql: export Sample 2016-12-24 11:32:10 +01:00
Fabian Reinartz 65581a3d46 promql: export SmapleStream 2016-12-24 11:29:39 +01:00
Fabian Reinartz 6315d00942 promql: export String value 2016-12-24 11:25:26 +01:00
Fabian Reinartz ac5d3bc05e promql: scalar T/V and Point 2016-12-24 11:23:06 +01:00
Fabian Reinartz 09666e2e2a promql: make scalar public 2016-12-24 10:44:04 +01:00
Fabian Reinartz b3f71df350 promql: make matrix exported 2016-12-24 10:42:54 +01:00
Fabian Reinartz a62df87022 promql: rename vector 2016-12-24 10:40:09 +01:00
Fabian Reinartz 15a931dbdb promql: migrate model types, use tsdb interfaces 2016-12-24 00:39:52 +01:00