* Allow to disable trimming when querying TSDB
Signed-off-by: Marco Pracucci <marco@pracucci.com>
* Addressed review comments
Signed-off-by: Marco Pracucci <marco@pracucci.com>
* Added unit test
Signed-off-by: Marco Pracucci <marco@pracucci.com>
* Renamed TrimDisabled to DisableTrimming
Signed-off-by: Marco Pracucci <marco@pracucci.com>
By holding a `proto.Buffer` per shard and passing it down to where
marshalling is done, we avoid creating a lot of garbage.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Initial draft of prometheus-agent
This commit introduces a new binary, prometheus-agent, based on the
Grafana Agent code. It runs a WAL-only version of prometheus without the
TSDB, alerting, or rule evaluations. It is intended to be used to
remote_write to Prometheus or another remote_write receiver.
By default, prometheus-agent will listen on port 9095 to not collide
with the prometheus default of 9090.
Truncation of the WAL cooperates on a best-effort case with Remote
Write. Every time the WAL is truncated, the minimum timestamp of data to
truncate is determined by the lowest sent timestamp of all samples
across all remote_write endpoints. This gives loose guarantees that data
from the WAL will not try to be removed until the maximum sample
lifetime passes or remote_write starts functionining.
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* add tests for Prometheus agent (#22)
* add tests for Prometheus agent
* add tests for Prometheus agent
* rearranged tests as per the review comments
* update tests for Agent
* changes as per code review comments
Signed-off-by: SriKrishna Paparaju <paparaju@gmail.com>
* incremental changes to prometheus agent
Signed-off-by: SriKrishna Paparaju <paparaju@gmail.com>
* changes as per code review comments
Signed-off-by: SriKrishna Paparaju <paparaju@gmail.com>
* Commit feedback from code review
Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com>
Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com>
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* Port over some comments from grafana/agent
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* Rename agent.Storage to agent.DB for tsdb consistency
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* Consolidate agentMode ifs in cmd/prometheus/main.go
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* Document PreAction usage requirements better for agent mode flags
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* remove unnecessary defaultListenAddr
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
* `go fmt ./tsdb/agent` and fix lint errors
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
Co-authored-by: SriKrishna Paparaju <paparaju@gmail.com>
* expose NewChainSampleIterator func
Signed-off-by: Ben Ye <ben.ye@bytedance.com>
* add comment
Signed-off-by: Ben Ye <ben.ye@bytedance.com>
* update comments
Signed-off-by: Ben Ye <ben.ye@bytedance.com>
A lot of this code was hacked together, literally during a
hackathon. This commit intends not to change the code substantially,
but just make the code obey the usual style practices.
A (possibly incomplete) list of areas:
* Generally address linter warnings.
* The `pgk` directory is deprecated as per dev-summit. No new packages should
be added to it. I moved the new `pkg/histogram` package to `model`
anticipating what's proposed in #9478.
* Make the naming of the Sparse Histogram more consistent. Including
abbreviations, there were just too many names for it: SparseHistogram,
Histogram, Histo, hist, his, shs, h. The idea is to call it "Histogram" in
general. Only add "Sparse" if it is needed to avoid confusion with
conventional Histograms (which is rare because the TSDB really has no notion
of conventional Histograms). Use abbreviations only in local scope, and then
really abbreviate (not just removing three out of seven letters like in
"Histo"). This is in the spirit of
https://github.com/golang/go/wiki/CodeReviewComments#variable-names
* Several other minor name changes.
* A lot of formatting of doc comments. For one, following
https://github.com/golang/go/wiki/CodeReviewComments#comment-sentences
, but also layout question, anticipating how things will look like
when rendered by `godoc` (even where `godoc` doesn't render them
right now because they are for unexported types or not a doc comment
at all but just a normal code comment - consistency is queen!).
* Re-enabled `TestQueryLog` and `TestEndopints` (they pass now,
leaving them disabled was presumably an oversight).
* Bucket iterator for histogram.Histogram is now created with a
method.
* HistogramChunk.iterator now allows iterator recycling. (I think
@dieterbe only commented it out because he was confused by the
question in the comment.)
* HistogramAppender.Append panics now because we decided to treat
staleness marker differently.
Signed-off-by: beorn7 <beorn@grafana.com>
We are re-enabling HTTP 2 again. There has been a few bugfixes upstream
in go, and we have also enabled ReadIdleTimeout.
Fix#7588Fix#9068
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
Redact any basic auth passwords in the remote write URL (which are
technically allowed although not recommended) when used as metric
labels.
Signed-off-by: Nick Pillitteri <nick.pillitteri@grafana.com>
* Add initial support for exemplar to the remote write receiver endpoint
Signed-off-by: Serge Catudal <serge.catudal@gmail.com>
* Update storage remote write handler tests with exemplars
Signed-off-by: Serge Catudal <serge.catudal@gmail.com>
* Update remote write handler in order to have a distinct checkAppendExemplarError function from scrape
Signed-off-by: Serge Catudal <serge.catudal@gmail.com>
* Fix `kuma_sd` targetgroup reporting (#9157)
* Bundle all xDS targets into a single group
Signed-off-by: austin ce <austin.cawley@gmail.com>
* Snapshot in-memory chunks on shutdown for faster restarts (#7229)
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Rename links
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Remove Individual Data Type Caps in Per-shard Buffering for Remote Write (#8921)
* Moved everything to nPending buffer
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Simplify exemplar capacity addition
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Added pre-allocation
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Don't allocate if not sending exemplars
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Avoid deadlock when processing duplicate series record (#9170)
* Avoid deadlock when processing duplicate series record
`processWALSamples()` needs to be able to send on its output channel
before it can read the input channel, so reads to allow this in case the
output channel is full.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* processWALSamples: update comment
Previous text seems to relate to an earlier implementation.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Optimise WAL loading by removing extra map and caching min-time (#9160)
* BenchmarkLoadWAL: close WAL after use
So that goroutines are stopped and resources released
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* BenchmarkLoadWAL: make series IDs co-prime with #workers
Series are distributed across workers by taking the modulus of the
ID with the number of workers, so multiples of 100 are a poor choice.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* BenchmarkLoadWAL: simulate mmapped chunks
Real Prometheus cuts chunks every 120 samples, then skips those samples
when re-reading the WAL. Simulate this by creating a single mapped chunk
for each series, since the max time is all the reader looks at.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Fix comment
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Remove series map from processWALSamples()
The locks that is commented to reduce contention in are now sharded
32,000 ways, so won't be contended. Removing the map saves memory and
goes just as fast.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* loadWAL: Cache the last mmapped chunk time
So we can skip calling append() for samples it will reject.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Improvements from code review
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Full stops and capitals on comments
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Cache max time in both places mmappedChunks is updated
Including refactor to extract function `setMMappedChunks`, to reduce
code duplication.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Update head min/max time when mmapped chunks added
This ensures we have the correct values if no WAL samples are added for
that series.
Note that `mSeries.maxTime()` was always `math.MinInt64` before, since
that function doesn't consider mmapped chunks.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Split Go and React Tests (#8897)
* Added go-ci and react-ci
Co-authored-by: Julien Pivotto <roidelapluie@inuits.eu>
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Remove search keymap from new expression editor (#9184)
Signed-off-by: Julius Volz <julius.volz@gmail.com>
Co-authored-by: Austin Cawley-Edwards <austin.cawley@gmail.com>
Co-authored-by: Levi Harrison <git@leviharrison.dev>
Co-authored-by: Julien Pivotto <roidelapluie@inuits.eu>
Co-authored-by: Bryan Boreham <bjboreham@gmail.com>
Co-authored-by: Julius Volz <julius.volz@gmail.com>
* Moved everything to nPending buffer
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Simplify exemplar capacity addition
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Added pre-allocation
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Don't allocate if not sending exemplars
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Refactor: pass segment-reading function as param
To allow a different implementation to be used when garbage-collecting.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* remote_write: reduce blocking from GC of series
Add a method `UpdateSeriesSegment()` which is used together with
`SeriesReset()` to garbage-collect old series. This allows us to
split the lock around queueManager series data and avoid blocking
`Append()` while reading series from the last checkpoint.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Cosmetic: review feedback on comments
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* remote-write benchmark: include GC of series
Reduce the total number of samples per iteration from 5000*5000
(25 million) which is too big for my laptop, to 1*10000.
Extend `createTimeseries()` to add additional labels, so that the
queue manager is doing more realistic work.
Move the Append() call to a background goroutine - this works because
TestWriteClient uses a WaitGroup to signal completion.
Call `StoreSeries()` and `SeriesReset()` while adding samples, to
simulate the garbage-collection that wal.Watcher does.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Change BenchmarkSampleDelivery to call UpdateSeriesSegment
This matches what Watcher.garbageCollectSeries() is doing now
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Push the matchers for LabelNames all the way into the index.
NB This doesn't actually implement it in the index, just plumbs it through for now...
Signed-off-by: Tom Wilkie <tom@grafana.com>
* Hack it up. Does not work.
Signed-off-by: Tom Wilkie <tom@grafana.com>
* Revert changes I don't understand
Can't see why do we need to hold a mutex on symbols, and the purpose of
the LabelNamesFor method.
Maybe I'll need to re-add this later.
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Implement LabelNamesFor
This method provides the label names that appear in the postings
provided. We do that deeper than the label values because we know
beforehand that most of the label names we'll be the same across
different postings, and we don't want to go down an up looking up the
same symbols for all different series.
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Mutex on symbols should be unlocked
However, I still don't understand why do we need a mutex here.
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Fix head.LabelNamesFor
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Implement mockIndex LabelNames with matchers
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Nitpick on slice initialisation
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Add tests for LabelNamesWithMatchers
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Fix the mutex mess on head.LabelValues/LabelNames
I still don't see why we need to grab that unrelated mutex, but at least
now we're grabbing it consistently
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Check error after iterating postings
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Use the error from posting when there was en error in postings
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Update storage/interface.go comment
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
* Update tsdb/index/index.go comment
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
* Update tsdb/index/index.go wrapped error msg
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
* Update tsdb/index/index.go wrapped error msg
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
* Update tsdb/index/index.go warpped error msg
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
* Remove unneeded comment
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Add testcases for LabelNames w/matchers in api.go
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
* Use t.Cleanup() instead of defer in tests
Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com>
Co-authored-by: Tom Wilkie <tom@grafana.com>
Co-authored-by: Ganesh Vernekar <15064823+codesome@users.noreply.github.com>
* Create experimental circular buffer resize method, benchmarks
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* Optimize exemplar resize to only replay as many exemplars as needed
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* More comments, benchmark AddExemplar
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* optimizations
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* comment
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* Slight refactor of resize benchmark + make use of resize via runtime
reloadable storage config.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Some more config related changes.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address some review comments.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address more review comments.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Refactor to remove usage of noopExemplarStorage and avoid race condition
when resizing from Head code.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Fix or add comments to clarify some of the new behaviour.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* fix potential panics related to negative exemplar buffer lengths
Signed-off-by: Callum Styan <callumstyan@gmail.com>
Co-authored-by: Callum Styan <callumstyan@gmail.com>
* Append sparse histograms into the Head block
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Add AtHistogram() to Iterator interface. Make HistoChunk conform to Chunk interface.
Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com>
* Added MaxSamplesPerSend
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Added tests
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Fixed order of require
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Added docs
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* writes -> writesReceived
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Improved send loop
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Write exemplars to the WAL and send them over remote write.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Update example for exemplars, print data in a more obvious format.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Add metrics for remote write of exemplars.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Fix incorrect slices passed to send in remote write.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* We need to unregister the new metrics.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address review comments
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Order of exemplar append vs write exemplar to WAL needs to change.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Several fixes to prevent sending uninitialized or incorrect samples with an exemplar. Fix dropping exemplar for missing series. Add tests for queue_manager sending exemplars
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* Store both samples and exemplars in the same timeseries buffer to remove the alloc when building final request, keep sub-slices in separate buffers for re-use
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* Condense sample/exemplar delivery tests to parameterized sub-tests
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* Rename test methods for clarity now that they also handle exemplars
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* Rename counter variable. Fix instances where metrics were not updated correctly
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* Add exemplars to LoadWAL benchmark
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* last exemplars timestamp metric needs to convert value to seconds with
ms precision
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Process exemplar records in a separate go routine when loading the WAL.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address review comments related to clarifying comments and variable
names. Also refactor sample/exemplar to enqueue prompb types.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Regenerate types proto with comments, update protoc version again.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Put remote write of exemplars behind a feature flag.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address some of Ganesh's review comments.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Move exemplar remote write feature flag to a config file field.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address Bartek's review comments.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Don't allocate exemplar buffers in queue_manager if we're not going to
send exemplars over remote write.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Add ValidateExemplar function, validate exemplars when appending to head
and log them all to WAL before adding them to exemplar storage.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address more reivew comments from Ganesh.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Add exemplar total label length check.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address a few last review comments
Signed-off-by: Callum Styan <callumstyan@gmail.com>
Co-authored-by: Martin Disibio <mdisibio@gmail.com>
The purpose of GetRef() is to allow Append() to be called without
the caller needing to copy the labels. To avoid a race where a series
is removed from TSDB between the calls to GetRef() and Append(), we
return TSDB's copy of the labels.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Add method to get reference number for TSDB Appender
In situations where we need to copy labels before calling Add(),
GetRef() allows to check first, then call AddFast() in the case that the series
is already known.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Add explicit interface for GetRef() method
Suggested in code review by @bwplotka
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Rename OptionalGetRef to GetRef
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Simplify return value of GetRef()
0 can be relied on to mean 'no reference'
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
* Contribute grafana/agent sigv4 code
* address review feedback
- move validation logic for RemoteWrite into unmarshal
- copy configuration fields from ec2 SD config
- remove enabled field, use pointer for enabling sigv4
* Update config/config.go
* Don't provide credentials if secret key / access key left blank
* Add SigV4 headers to the list of unchangeable headers.
* sigv4: don't include all headers in signature
* only test for equality in the authorization header, not the signed date
* address review feedback
1. s/httpClientConfigEnabled/httpClientConfigAuthEnabled
2. bearer_token tuples to "authorization"
3. Un-export NewSigV4RoundTripper
* add x-amz-content-sha256 to list of unchangeable headers
* Document sigv4 configuration
* add suggestion for using default AWS SDK credentials
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
Co-authored-by: Julien Pivotto <roidelapluie@gmail.com>
* Move remote read handler to remote package.
This follows the pattern I started with the remote write handler. The api/v1 package is getting pretty cluttered. Moving code to other packages helps reduce this size and also makes it reusable - eg Cortex doesn't do streaming remote writes yet, and will very soon.
Signed-off-by: Tom Wilkie <tom.wilkie@gmail.com>
* Deal with a nil remoteReadHandler for tests.
Signed-off-by: Tom Wilkie <tom.wilkie@gmail.com>
* Remove the global metrics.
Signed-off-by: Tom Wilkie <tom.wilkie@gmail.com>
* Fix test.
Signed-off-by: Tom Wilkie <tom.wilkie@gmail.com>
* Review feedback.
Signed-off-by: Tom Wilkie <tom.wilkie@gmail.com>
This moves the label lookup into TSDB, whilst still keeping the cached-ref optimisation for repeated Appends.
This makes the API easier to consume and implement. In particular this change is motivated by the scrape-time-aggregation work, which I don't think is possible to implement without it as it needs access to label values.
Signed-off-by: Tom Wilkie <tom.wilkie@gmail.com>
* Consider status code 429 as recoverable errors to avoid resharding.
* Adds support for Retry-After in backoff logic in remote storage.
Signed-off-by: Harkishen-Singh <harkishensingh@hotmail.com>
- Remove unrelated changes
- Refactor code out of the API module - that is already getting pretty crowded.
- Don't track reference for AddFast in remote write. This has the potential to consume unlimited server-side memory if a malicious client pushes a different label set for every series. For now, its easier and safer to always use the 'slow' path.
- Return 400 on out of order samples.
- Use remote.DecodeWriteRequest in the remote write adapters.
- Put this behing the 'remote-write-server' feature flag
- Add some (very) basic docs.
- Used named return & add test for commit error propagation
Signed-off-by: Tom Wilkie <tom.wilkie@gmail.com>
* Testify: move to require
Moving testify to require to fail tests early in case of errors.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* More moves
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* MultiError: Refactored MultiError for more concise and safe usage.
* Less lines
* Goland IDE was marking every usage of old MultiError "potential nil" error
* It was easy to forgot using Err() when error was returned, now it's safely assured on compile time.
NOTE: Potentially I would rename package to merrors. (: In different PR.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Addressed review comments.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Addressed comments.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Fix after rebase.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
Currently there is no way of tracking the value of the
`max_samples_per_send` configuration option, which is commonly tweaked
when integrating with a remote write backend.
Signed-off-by: Jorge Luis Betancourt Gonzalez <jorge-luis.betancourt@trivago.com>
* Refactor test assertions
This pull request gets rid of assert.True where possible to use
fine-grained assertions.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* Refactor global vars to avoid failure with run test more than once.
Signed-off-by: Harkishen-Singh <harkishensingh@hotmail.com>
* Register highestRecvTimestamp metric.
Signed-off-by: Harkishen-Singh <harkishensingh@hotmail.com>
* Use local interner vars.
Signed-off-by: Harkishen-Singh <harkishensingh@hotmail.com>
* Declare interner in write storage.
Signed-off-by: Harkishen-Singh <harkishensingh@hotmail.com>
The remote read client needs to use the nethttp.Transport wrapper in
order for spans to be instrumented properly.
Signed-off-by: Chris Marchbanks <csmarchbanks@gmail.com>
* Exposes remote write client to allow for customizations to the http client
Signed-off-by: Joe Elliott <number101010@gmail.com>
* Removed changes to vendored file
Signed-off-by: Joe Elliott <number101010@gmail.com>
This also fixes a bug in query_log_file, which now is relative to the config file like all other paths.
Signed-off-by: Andy Bursavich <abursavich@gmail.com>
I did not want to move those in previous PR to make it easier to review. Now small cleanup time for readability. (:
## Changes
* Merge series goes to `storage/merge.go` leaving `fanout.go` for just fanout code.
* Moved `fanout test` code from weird separate package to storage.
* Unskiped one test: TestFanout_SelectSorted/chunk_querier
* Moved block series set codes responsible for querying blocks to `querier.go` from `compact.go`
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* tsdb: Added ChunkQueryable implementations to db; unified compactor, querier and fanout block iterating.
Chained to https://github.com/prometheus/prometheus/pull/7059
* NewMerge(Chunk)Querier now takies multiple primaries allowing tsdb DB code to use it.
* Added single SeriesEntry / ChunkEntry for all series implementations.
* Unified all vertical, and non vertical for compact and querying to single
merge series / chunk sets by reusing VerticalSeriesMergeFunc for overlapping algorithm (same logic as before)
* Added block (Base/Chunk/)Querier for block querying. We then use populateAndTomb(Base/Chunk/) to iterate over chunks or samples.
* Refactored endpoint tests and querier tests to include subtests.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Addressed comments from Brian and Beorn.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Fixed snapshot test and added chunk iterator support for DBReadOnly.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Fixed race when iterating over Ats first.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Fixed tests.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Fixed populate block tests.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Fixed endpoints test.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Fixed test.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Added test & fixed case of head open chunk.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Fixed DBReadOnly tests and bug producing 1 sample chunks.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Added cases for partial block overlap for multiple full chunks.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Added extra tests for chunk meta after compaction.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Fixed small vertical merge bug and added more tests for that.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* storage: Replace usage of sync/atomic with uber-go/atomic
Signed-off-by: Javier Palomo <javier.palomo.almena@gmail.com>
* tsdb: Replace usage of sync/atomic with uber-go/atomic
Signed-off-by: Javier Palomo <javier.palomo.almena@gmail.com>
* web: Replace usage of sync/atomic with uber-go/atomic
Signed-off-by: Javier Palomo <javier.palomo.almena@gmail.com>
* notifier: Replace usage of sync/atomic with uber-go/atomic
Signed-off-by: Javier Palomo <javier.palomo.almena@gmail.com>
* cmd: Replace usage of sync/atomic with uber-go/atomic
Signed-off-by: Javier Palomo <javier.palomo.almena@gmail.com>
* scripts: Verify that we are not using restricted packages
It checks that we are not directly importing 'sync/atomic'.
Signed-off-by: Javier Palomo <javier.palomo.almena@gmail.com>
* Reorganise imports in blocks
Signed-off-by: Javier Palomo <javier.palomo.almena@gmail.com>
* notifier/test: Apply PR suggestions
Signed-off-by: Javier Palomo <javier.palomo.almena@gmail.com>
* storage/remote: avoid storing references on newEntry
Signed-off-by: Javier Palomo <javier.palomo.almena@gmail.com>
* Revert "scripts: Verify that we are not using restricted packages"
This reverts commit 278d32748e.
Signed-off-by: Javier Palomo <javier.palomo.almena@gmail.com>
* web: Group imports accordingly
Signed-off-by: Javier Palomo <javier.palomo.almena@gmail.com>
Right now Queue Manager metrics are registered when the metrics struct
is created, which happens before a changed queue is shutdown and the old
metrics are unregistered. In the case of named queues or updates to
external labels the apply config will panic due to duplicate metrics.
Instead, register the metrics as part of starting the queue as we always
guarantee that Stop will be called before a new Start.
Signed-off-by: Chris Marchbanks <csmarchbanks@gmail.com>
* Pending Samples metric includes samples in channel
The pending samples metric should also include samples waiting in the
channels to be sent to provide a more accurate measure. In addition,
make sure that the pending samples is reset to 0 anytime a queue is
started as we remake all of the shards at that time.
Signed-off-by: Chris Marchbanks <csmarchbanks@gmail.com>
* Log the number of dropped samples on hard shutdown
Signed-off-by: Chris Marchbanks <csmarchbanks@gmail.com>
* Fixed nits introduced by https://github.com/prometheus/prometheus/pull/7334
* Added ChunkQueryable implementation to fanout and readyStorage.
* Added more comments.
* Changed NewVerticalChunkSeriesMerger to CompactingChunkSeriesMerger, removed tiny interface by reusing VerticalSeriesMergeFunc for overlapping algorithm for
both chunks and series, for both querying and compacting (!) + made sure duplicates are merged.
* Added ErrChunkSeriesSet
* Added Samples interface for seamless []promb.Sample to []tsdbutil.Sample conversion.
* Deprecating non chunks serieset based StreamChunkedReadResponses, added chunk one.
* Improved tests.
* Split remote client into Write (old storage) and read.
* Queryable client is now SampleAndChunkQueryable. Since we cannot use nice QueryableFunc I moved
all config based options to sampleAndChunkQueryableClient to aboid boilerplate.
In next commit: Changes for TSDB.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Add errors and Warnings to SeriesSet
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Change Querier interface and refactor accordingly
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Refactor promql/engine to propagate warnings at eval stage
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Address review issues
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Make sure all the series from all Selects are pre-advanced
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Address review issues
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Separate merge series sets
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Clean
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Refactor merge querier failure handling
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Refactored and simplified fanout with improvements from incoming chunk iterator PRs.
* Secondary logic is hidden, instead of weird failed series set logic we had.
* Fanout is well commented
* Fanout closing record all errors
* MergeQuerier improved API (clearer)
* deferredGenericMergeSeriesSet is not needed as we return no samples anyway for failed series sets (next = false).
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Fix formatting
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Fix CI issues
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Added final tests for error handling.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Addressed Brian's comments.
* Moved hints in populate to be allocated only when needed.
* Used sync.Once in secondary Querier to achieve all-or-nothing partial response logic.
* Select after first Next is done will panic.
NOTE: in lazySeriesSet in theory we could just panic, I think however we can
totally just return error, it will panic in expand anyway.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Utilize errWithWarnings
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Fix recently introduced expansion issue
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Add tests for secondary querier error handling
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Implement lazy merge
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Add name to test cases
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Reorganize
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Address review comments
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Address review comments
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Remove redundant warnings
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
* Fix rebase mistake
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com>
* increase the remote write bucket range
Increase the range of remote write buckets to capture times above 10s for laggy scenarios
Buckets had been: {.005, .01, .025, .05, .1, .25, .5, 1, 2.5, 5, 10}
Buckets are now: {0.03125, 0.0625, 0.125, 0.25, 0.5, 1, 2, 4, 8, 16, 32, 64, 128, 256, 512}
Signed-off-by: Bert Hartmann <berthartm@gmail.com>
* revert back to DefBuckets with addons to be backwards compatible
Signed-off-by: Bert Hartmann <berthartm@gmail.com>
* shuffle the buckets to maintain 2-2.5x increases
Signed-off-by: Bert Hartmann <berthartm@gmail.com>
* added the prometheus_remote_storage_remote_read_queries_total query
Signed-off-by: njingco <jingco.nicole@gmail.com>
* adjusted the help label of remoteReadQueriesTotal
Signed-off-by: njingco <jingco.nicole@gmail.com>
* Trace Remote Write requests
Signed-off-by: Cody Boggs <cboggs@splunk.com>
* Refactor store attempts to keep code flow clearer, and avoid so many places to deal with span finishing
Signed-off-by: Cody Boggs <cboggs@splunk.com>
Right now any new metrics added for remote write need to be added to
both the QueueManager struct, and the queueManagerMetrics struct.
Instead, use the queueManagerMetrics struct directly from QueueManager.
The newQueueManagerMetrics constructor will now create the metrics for a
specific queue with name and endpoint pre-populated, and a new copy of
the struct will be created specifically for each queue.
This also fixes a bug where prometheus_remote_storage_sent_bytes_total
is not being unregistered after a queue is changed.
Signed-off-by: Chris Marchbanks <csmarchbanks@gmail.com>
If the server is returning non-recoverable errors, such as if we are
trying to push samples that are too old, remote write will never
reshard. Non-recoverable errors should be treated the same as success
for the purpose of resharding, just as we do with sample rates and
durations.
Signed-off-by: Chris Marchbanks <csmarchbanks@gmail.com>
Remake the http client whenever ApplyConfig is called. This allows
secrets to be updated without needing to restart an otherwise unchanged
queue.
Signed-off-by: Chris Marchbanks <csmarchbanks@gmail.com>
* storage: Added Chunks{Queryable/Querier/SeriesSet/Series/Iteratable. Added generic Merge{SeriesSet/Querier} implementation.
## Rationales:
In many places (e.g. chunk Remote read, Thanos Receive fetching chunk from TSDB), we operate on encoded chunks not samples.
This means that we unnecessary decode/encode, wasting CPU, time and memory.
This PR adds chunk iterator interfaces and makes the merge code to be reused between both seriesSets
I will make the use of it in following PR inside tsdb itself. For now fanout implements it and mergers.
All merges now also allows passing series mergers. This opens doors for custom deduplications other than TSDB vertical ones (e.g. offline one we have in Thanos).
## Changes
* Added Chunk versions of all iterating methods. It all starts in Querier/ChunkQuerier. The plan is that
Storage will implement both chunked and samples.
* Added Seek to chunks.Iterator interface for iterating over chunks.
* NewMergeChunkQuerier was added; Both this and NewMergeQuerier are now using generigMergeQuerier to share the code. Generic code was added.
* Improved tests.
* Added some TODO for further simplifications in next PRs.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Addressed Brian's comments.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Moved s/Labeled/SeriesLabels as per Krasi suggestion.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Addressed Krasi's comments.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Second iteration of Krasi comments.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Another round of comments.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
This is technically BREAKING CHANGE, but it was like this from the beginning: I just notice that we rely in
Prometheus on remote read being sorted. This is because we use selected data from remote reads in MergeSeriesSet
which rely on sorting.
I found during work on https://github.com/prometheus/prometheus/pull/5882 that
we do so many repetitions because of this, for not good reason. I think
I found a good balance between convenience and readability with just one method.
Smaller the interface = better.
Also I don't know what TestSelectSorted was testing, but now it's testing sorting.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Fix bug with WAL watcher and Live Reader metrics usage.
Calling NewXMetrics when creating a Watcher or LiveReader results in a
registration error, which we're ignoring, and as a result other than the
first Watcher/Reader created, we had no metrics for either. So we would
only have metrics like Watcher Records Read for the first remote write
config in a users config file.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
I think the previous behavior is problematic as it will leave
`memSeries` around that still have `pendingCommit` set to `true`.
The only case where this can happen in this code path is a failure to
write to the WAL, in which case we are probably in trouble anyway. I
believe, however, we should still try to do the right thing and do the
full rollback. This will implicitly try to write to the WAL again, but
this time without samples, which may even succeed. (But we propagate
the previous error in any case.)
This also adds `a.head.putSeriesBuffer(a.sampleSeries)` to Rollback,
which was previously missing.
Signed-off-by: beorn7 <beorn@grafana.com>
* Change createTimeseries to take values for number of series and number
of samples per series.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Take num of samples to expect in expectSampleCount instead of array of
samples.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Add field to TestStorageClient to ignore samples sent waitgroup for
potential tests where we don't care about delivery of all samples.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Fix up tests a little bit.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
This is part of https://github.com/prometheus/prometheus/pull/5882 that can be done to simplify things.
All todos I added will be fixed in follow up PRs.
* querier.Querier, querier.Appender, querier.SeriesSet, and querier.Series interfaces merged
with storage interface.go. All imports that.
* querier.SeriesIterator replaced by chunkenc.Iterator
* Added chunkenc.Iterator.Seek method and tests for xor implementation (?)
* Since we properly handle SelectParams for Select methods I adjusted min max
based on that. This should help in terms of performance for queries with functions like offset.
* added Seek to deletedIterator and test.
* storage/tsdb was removed as it was only a unnecessary glue with incompatible structs.
No logic was changed, only different source of abstractions, so no need for benchmarks.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Remote store client's `Store` API currently doesn't use passed
context, but instead just constructs a new `context.Background()`
Signed-off-by: Anand Singh Kunwar <anandkunwar95@gmail.com>
The integral accumulator in the remote write sharding code is just a
second way of keeping track of the number of samples pending. Remove
integralAccumulator and use the samplesPending value we already
calculate to calculate the number of shards.
This has the added benefit of fixing a bug where the integralAccumulator
was not being initialized correctly due to not taking into account the
number of ticks being counted, causing the integralAccumulator initial
value to be off by an order of magnitude in some cases.
Signed-off-by: Chris Marchbanks <csmarchbanks@gmail.com>
Also improves TestPopulateLabels: testutil.ErrorEqual just returned a
bool without failing the test.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* Track remote write queues via a map so we don't care about index.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Support a job name for remote write/read so we can differentiate between
them using the name.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Remote write/read has Name to not confuse the meaning of the field with
scrape job names.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Split queue/client label into remote_name and url labels.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Don't allow for duplicate remote write/read configs.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Ensure we restart remote write queues if the hash of their config has
not changed, but the remote name has changed.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Include name in remote read/write config hashes, simplify duplicates
check, update test accordingly.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
It is possible that desired shards is always a bit higher than the
number of shards (less than 30%) and by exporting desired shards as the
raw number it will be easy to tell if a Prometheus is in that situation.
Signed-off-by: Chris Marchbanks <csmarchbanks@gmail.com>
* Refactor calculateDesiredShards + don't reshard if we're having issues
sending samples.
* Track lastSendTimestamp via an int64 with atomic add/load, add a test
for reshard calculation.
* Simplify conditional for skipping resharding, add samplesIn/Out to shard
testcase struct.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
The WAL Watcher replays a checkpoint after it is created in order to
garbage collect series that no longer exist in the WAL. Currently the
garbage collection process is done serially with reading from the tip of
the WAL which can cause large delays in writing samples to remote
storage just after compaction occurs.
This also fixes a memory leak where dropped series are not cleaned up as
part of the SeriesReset process.
Signed-off-by: Chris Marchbanks <csmarchbanks@gmail.com>
* Replaced test validations with testutils on storage/remote/codec_test.go
Signed-off-by: George Felix <george.felix@ubeeqo.com>
* gofmt
Signed-off-by: George Felix <george.felix@ubeeqo.com>
* Removed shouldPass assertion
Signed-off-by: George Felix <gfelixc@gmail.com>
* Fixes to improve readability
Signed-off-by: George Felix <george.felix@ubeeqo.com>
* Fixes based on code review comments
Signed-off-by: George Felix <george.felix@ubeeqo.com>
* Added Fatal method and used it in buffer_test
Signed-off-by: Joe Elliott <number101010@gmail.com>
* Added period to meet contributing guidelines
Signed-off-by: Joe Elliott <number101010@gmail.com>
* Removed fatal testutil method. Refactored test cases to use testutil.Assert
Signed-off-by: Joe Elliott <number101010@gmail.com>
* Added if found condition for clarity
Signed-off-by: Joe Elliott <number101010@gmail.com>
* Show warnings in UI if query have returned some warnings
+ improve warning (error) text if query to remote was finished with error
* Add prefixes for remote_read errors
Signed-off-by: Stan Putrya <root.vagner@gmail.com>
* Update go.mod dependencies before release
Signed-off-by: Julius Volz <julius.volz@gmail.com>
* Add issue for showing query warnings in promtool
Signed-off-by: Julius Volz <julius.volz@gmail.com>
* Revert json-iterator back to 1.1.6
It produced errors when marshaling Point values with special float
values.
Signed-off-by: Julius Volz <julius.volz@gmail.com>
* Fix expected step values in promtool tests after client_golang update
Signed-off-by: Julius Volz <julius.volz@gmail.com>
* Update generated protobuf code after proto dep updates
Signed-off-by: Julius Volz <julius.volz@gmail.com>
The desired shards calculation now properly keeps track of the rate of
pending samples, and uses the previously unused integralAccumulator to
adjust for missing information in the desired shards calculation.
Also, configure more capacity for each shard. The default 10 capacity
causes shards to block on each other while
sending remote requests. Default to a 500 sample capacity and explain in
the documentation that having more capacity will help throughput.
Signed-off-by: Chris Marchbanks <csmarchbanks@gmail.com>
* Check for duplicate label names in remote read
Also add test to confirm that #5731 is fixed
* Use subtests in TestValidateLabelsAndMetricName
* Really check that expectedErr matches err
Signed-off-by: Vadym Martsynovskyy <vmartsynovskyy@gmail.com>
* Only check last directory when discovering checkpoint number
Signed-off-by: Devin Trejo <dtrejo@palantir.com>
* Comments for checkpointNum
Signed-off-by: Devin Trejo <dtrejo@palantir.com>
* Add benchmark for sample delivery
* Simplify StoreSeries to have only one loop
* Reduce allocations for pending samples in runShard
* Only allocate one send slice per segment
* Cache a buffer in each shard for snappy to use
* Remove queue manager seriesMtx
It is not possible for any of the places protected by the seriesMtx to
be called concurrently so it is safe to remove. By removing the mutex we
can simplify the Append code to one loop.
Signed-off-by: Chris Marchbanks <csmarchbanks@gmail.com>
This allows other processes to reuse just the remote write code without
having to use the remote read code as well. This will be used to create
a sidecar capable of sending remote write payloads.
Signed-off-by: Chris Marchbanks <csmarchbanks@gmail.com>
