* promtool: backfill: allow configuring block duration
When backfilling large amounts of data across long periods of time, it
may in certain circumstances be useful to use a longer block duration to
increase the efficiency and speed of the backfilling process. This patch
adds a flag --block-duration-power to allow a user to choose the power N
where the block duration is 2^(N+1)h.
Signed-off-by: Steve Kuznetsov <skuznets@redhat.com>
* promtool: use sub-tests in backfill testing
Signed-off-by: Steve Kuznetsov <skuznets@redhat.com>
* backfill: add messages to tests for clarity
When someone new breaks a test, seeing "expected: false, got: true" is
really not useful. A nice message helps here.
Signed-off-by: Steve Kuznetsov <skuznets@redhat.com>
* backfill: test long block durations
A test that uses a long block duration to write bigger blocks is added.
The check to make sure all blocks are the default duration is removed.
Signed-off-by: Steve Kuznetsov <skuznets@redhat.com>
* Added MaxSamplesPerSend
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Added tests
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Fixed order of require
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Added docs
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* writes -> writesReceived
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Improved send loop
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Cut v2.28.0-rc.0 (#8954)
* Cut v2.28.0-rc.0
Signed-off-by: Julius Volz <julius.volz@gmail.com>
* Changelog fixup
Signed-off-by: Julius Volz <julius.volz@gmail.com>
* Address review comments
Signed-off-by: Julius Volz <julius.volz@gmail.com>
* Downgrade some features to enhancements
Signed-off-by: Julius Volz <julius.volz@gmail.com>
* Adjust release date to today
Signed-off-by: Julius Volz <julius.volz@gmail.com>
* Migrate HTTP SD docs from docs repo (#8972)
See discussion in https://github.com/prometheus/docs/pull/1975
Signed-off-by: Julius Volz <julius.volz@gmail.com>
* Cut Prometheus v2.28.0 (#8973)
Signed-off-by: Julius Volz <julius.volz@gmail.com>
* Added walreplay API endpoint
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Added starting page to react-ui
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Documented the new endpoint
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Fixed typos
Signed-off-by: Levi Harrison <git@leviharrison.dev>
Co-authored-by: Julius Volz <julius.volz@gmail.com>
* Removed logo
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Changed isResponding to isUnexpected
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Changed width of progress bar
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Changed width of progress bar
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Added DB stats object
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Updated starting page to work with new fields
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Passing nil
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Passing nil (pt. 2)
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Passing nil (pt. 3)
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Passing nil (and also implementing a method this time) (pt. 4)
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Passing nil (and also implementing a method this time) (pt. 5)
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Changed const to let
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Passing nil (pt. 6)
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Remove SetStats method
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Added comma
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Changed api
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Changed to triple equals
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Fixed data response types
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Don't return pointer
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Changed version
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Fixed interface issue
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Fixed pointer
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Fixed copying lock value error
Signed-off-by: Levi Harrison <git@leviharrison.dev>
Co-authored-by: Julius Volz <julius.volz@gmail.com>
* Write exemplars to the WAL and send them over remote write.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Update example for exemplars, print data in a more obvious format.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Add metrics for remote write of exemplars.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Fix incorrect slices passed to send in remote write.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* We need to unregister the new metrics.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address review comments
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Order of exemplar append vs write exemplar to WAL needs to change.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Several fixes to prevent sending uninitialized or incorrect samples with an exemplar. Fix dropping exemplar for missing series. Add tests for queue_manager sending exemplars
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* Store both samples and exemplars in the same timeseries buffer to remove the alloc when building final request, keep sub-slices in separate buffers for re-use
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* Condense sample/exemplar delivery tests to parameterized sub-tests
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* Rename test methods for clarity now that they also handle exemplars
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* Rename counter variable. Fix instances where metrics were not updated correctly
Signed-off-by: Martin Disibio <mdisibio@gmail.com>
* Add exemplars to LoadWAL benchmark
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* last exemplars timestamp metric needs to convert value to seconds with
ms precision
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Process exemplar records in a separate go routine when loading the WAL.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address review comments related to clarifying comments and variable
names. Also refactor sample/exemplar to enqueue prompb types.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Regenerate types proto with comments, update protoc version again.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Put remote write of exemplars behind a feature flag.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address some of Ganesh's review comments.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Move exemplar remote write feature flag to a config file field.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address Bartek's review comments.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Don't allocate exemplar buffers in queue_manager if we're not going to
send exemplars over remote write.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Add ValidateExemplar function, validate exemplars when appending to head
and log them all to WAL before adding them to exemplar storage.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address more reivew comments from Ganesh.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Add exemplar total label length check.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Address a few last review comments
Signed-off-by: Callum Styan <callumstyan@gmail.com>
Co-authored-by: Martin Disibio <mdisibio@gmail.com>
* scrape: add label limits per scrape
Add three new limits to the scrape configuration to provide some
mechanism to defend against unbound number of labels and excessive
label lengths. If any of these limits are broken by a sample from a
scrape, the whole scrape will fail. For all of these configuration
options, a zero value means no limit.
The `label_limit` configuration will provide a mechanism to bound the
number of labels per-scrape of a certain sample to a user defined limit.
This limit will be tested against the sample labels plus the discovery
labels, but it will exclude the __name__ from the count since it is a
mandatory Prometheus label to which applying constraints isn't
meaningful.
The `label_name_length_limit` and `label_value_length_limit` will
prevent having labels of excessive lengths. These limits also skip the
__name__ label for the same reasons as the `label_limit` option and will
also make the scrape fail if any sample has a label name/value length
that exceed the predefined limits.
Signed-off-by: Damien Grisonnet <dgrisonn@redhat.com>
* scrape: add metrics and alert to label limits
Add three gauge, one for each label limit to easily access the
limit set by a certain scrape target.
Also add a counter to count the number of targets that exceeded the
label limits and thus were dropped. This is useful for the
`PrometheusLabelLimitHit` alert that will notify the users that scraping
some targets failed because they had samples exceeding the label limits
defined in the scrape configuration.
Signed-off-by: Damien Grisonnet <dgrisonn@redhat.com>
* scrape: apply label limits to __name__ label
Apply limits to the __name__ label that was previously skipped and
truncate the label names and values in the error messages as they can be
very very long.
Signed-off-by: Damien Grisonnet <dgrisonn@redhat.com>
* scrape: remove label limits gauges and refactor
Remove `prometheus_target_scrape_pool_label_limit`,
`prometheus_target_scrape_pool_label_name_length_limit`, and
`prometheus_target_scrape_pool_label_value_length_limit` as they are not
really useful since we don't have the information on the labels in it.
Signed-off-by: Damien Grisonnet <dgrisonn@redhat.com>
Clarify documentation for label_replace() because of ambiguities
between label keys and label values.
Signed-off-by: Matthew Smedberg <matthew.smedberg@gmail.com>
* Enable parsing strings in humanize functions
This is useful to humanize count_values or buckets labels.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
Prometheus adds the ability to read secrets from files. This add
this feature for the scaleway service discovery.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* Document lack of metadata deletion in deletion API
See also https://github.com/prometheus/prometheus/issues/7932
I also fixed the other "NOTE" callouts to be formatted in such a way that our
docs system formats them as callout boxes.
Signed-off-by: Julius Volz <julius.volz@gmail.com>
* WIP
Signed-off-by: Julius Volz <julius.volz@gmail.com>
* Improve wordings
Signed-off-by: Julius Volz <julius.volz@gmail.com>
* Contribute grafana/agent sigv4 code
* address review feedback
- move validation logic for RemoteWrite into unmarshal
- copy configuration fields from ec2 SD config
- remove enabled field, use pointer for enabling sigv4
* Update config/config.go
* Don't provide credentials if secret key / access key left blank
* Add SigV4 headers to the list of unchangeable headers.
* sigv4: don't include all headers in signature
* only test for equality in the authorization header, not the signed date
* address review feedback
1. s/httpClientConfigEnabled/httpClientConfigAuthEnabled
2. bearer_token tuples to "authorization"
3. Un-export NewSigV4RoundTripper
* add x-amz-content-sha256 to list of unchangeable headers
* Document sigv4 configuration
* add suggestion for using default AWS SDK credentials
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
Co-authored-by: Julien Pivotto <roidelapluie@gmail.com>
This PR introduces support for follow_redirect, to enable users to
disable following HTTP redirects.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
The label `__meta_digitalocean_image` expose the `slug` of the image and
the `slug` is only present in the public images.
To refer a user-generated image (`snapshot` or `custom`) we can use
the image's display name.
See: https://developers.digitalocean.com/documentation/v2/#images
Signed-off-by: Matteo Valentini <matteo.valentini@nethesis.it>
- Remove unrelated changes
- Refactor code out of the API module - that is already getting pretty crowded.
- Don't track reference for AddFast in remote write. This has the potential to consume unlimited server-side memory if a malicious client pushes a different label set for every series. For now, its easier and safer to always use the 'slow' path.
- Return 400 on out of order samples.
- Use remote.DecodeWriteRequest in the remote write adapters.
- Put this behing the 'remote-write-server' feature flag
- Add some (very) basic docs.
- Used named return & add test for commit error propagation
Signed-off-by: Tom Wilkie <tom.wilkie@gmail.com>
This commit adds `@ <timestamp>` modifier as per this design doc: https://docs.google.com/document/d/1uSbD3T2beM-iX4-Hp7V074bzBRiRNlqUdcWP6JTDQSs/edit.
An example query:
```
rate(process_cpu_seconds_total[1m])
and
topk(7, rate(process_cpu_seconds_total[1h] @ 1234))
```
which ranks based on last 1h rate and w.r.t. unix timestamp 1234 but actually plots the 1m rate.
Signed-off-by: Ganesh Vernekar <cs15btech11018@iith.ac.in>
Improve the documentation to clarify the differences beetween rules in a
group and outside a group.
Signed-off-by: Thibault Jamet <tjamet@users.noreply.github.com>
commit 9875afc491 changed the type from
metric names to label values, we might as well adjust the description.
The alternative is to revert that commit and restrict names of alerting
rules again even if that was not really enforced.
Signed-off-by: Peter Wu <pwu@cloudflare.com>
The React app's assets are now served under /assets, while all old
custom web assets (including the ones for console templates) are now
served from /classic/static.
I tested different combinations of --web.external-url and
--web.route-prefix with proxies in front, and I couldn't find a problem
yet with the routing. Console templates also still work.
While migrating old endpoints to /classic, I noticed that /version was
being treated like a lot of the old UI pages, with readiness check
handler in front of it, etc. I kept it in /version and removed that
readiness wrapper, since it doesn't seem to be needed for that endpoint.
Signed-off-by: Julius Volz <julius.volz@gmail.com>
`promtool update rules` is no longer available after Prometheus 2.5.
Document this to avoid confusion such as in #6988.
Signed-off-by: Christian Hoffmann <mail@hoffmann-christian.info>
The documentation referenced "data volume containers", which were
superseded by named volume support in Docker several years ago.
There were to bind-mounting examples in the docs that are effectively
doing the same thing, but the description of the second was somewhat
erroneous.
Signed-off-by: Lars Kellogg-Stedman <lars@redhat.com>
The links fix makes the links point to the current version of the files,
e.g. the relase branch.
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
Sadly, just linking to the Histogram best practice document, as done
for `histogram_quantile`, would be confusing here because the best
practice document only deals with quantiles in the context of
Histograms and Summaries, which is very different from the context of
the `quantile` aggregator and `quantile_over_time` function, which is
already a source of a lot of confusion.
Thus, I think the least bad solution is to add a short explanation in
this section directly. There isn't even a good resource on the
internet we can link to. A lot of statisticians use φ-quantiles, but
they don't have a generally accepted name for it.
I have added the explanation after the other detailed explanations of
`count_values`, `topk` and `bottomk`. I think that fits quite nicely
into the flow.
Signed-off-by: beorn7 <beorn@grafana.com>
* OpenStack SD: Add availability config option, to choose endpoint type
In some environments Prometheus must query OpenStack via an alternative
endpoint type (gophercloud calls this `availability`.
This commit implements this option.
Co-Authored-By: Dennis Kuhn <d.kuhn@syseleven.de>
Signed-off-by: Steffen Neubauer <s.neubauer@syseleven.de>
