We are re-enabling HTTP 2 again. There has been a few bugfixes upstream
in go, and we have also enabled ReadIdleTimeout.
Fix#7588Fix#9068
Signed-off-by: Julien Pivotto <roidelapluie@inuits.eu>
* Contribute grafana/agent sigv4 code
* address review feedback
- move validation logic for RemoteWrite into unmarshal
- copy configuration fields from ec2 SD config
- remove enabled field, use pointer for enabling sigv4
* Update config/config.go
* Don't provide credentials if secret key / access key left blank
* Add SigV4 headers to the list of unchangeable headers.
* sigv4: don't include all headers in signature
* only test for equality in the authorization header, not the signed date
* address review feedback
1. s/httpClientConfigEnabled/httpClientConfigAuthEnabled
2. bearer_token tuples to "authorization"
3. Un-export NewSigV4RoundTripper
* add x-amz-content-sha256 to list of unchangeable headers
* Document sigv4 configuration
* add suggestion for using default AWS SDK credentials
Signed-off-by: Robert Fratto <robertfratto@gmail.com>
Co-authored-by: Julien Pivotto <roidelapluie@gmail.com>
* Consider status code 429 as recoverable errors to avoid resharding.
* Adds support for Retry-After in backoff logic in remote storage.
Signed-off-by: Harkishen-Singh <harkishensingh@hotmail.com>
The remote read client needs to use the nethttp.Transport wrapper in
order for spans to be instrumented properly.
Signed-off-by: Chris Marchbanks <csmarchbanks@gmail.com>
* Exposes remote write client to allow for customizations to the http client
Signed-off-by: Joe Elliott <number101010@gmail.com>
* Removed changes to vendored file
Signed-off-by: Joe Elliott <number101010@gmail.com>
This also fixes a bug in query_log_file, which now is relative to the config file like all other paths.
Signed-off-by: Andy Bursavich <abursavich@gmail.com>
* Fixed nits introduced by https://github.com/prometheus/prometheus/pull/7334
* Added ChunkQueryable implementation to fanout and readyStorage.
* Added more comments.
* Changed NewVerticalChunkSeriesMerger to CompactingChunkSeriesMerger, removed tiny interface by reusing VerticalSeriesMergeFunc for overlapping algorithm for
both chunks and series, for both querying and compacting (!) + made sure duplicates are merged.
* Added ErrChunkSeriesSet
* Added Samples interface for seamless []promb.Sample to []tsdbutil.Sample conversion.
* Deprecating non chunks serieset based StreamChunkedReadResponses, added chunk one.
* Improved tests.
* Split remote client into Write (old storage) and read.
* Queryable client is now SampleAndChunkQueryable. Since we cannot use nice QueryableFunc I moved
all config based options to sampleAndChunkQueryableClient to aboid boilerplate.
In next commit: Changes for TSDB.
Signed-off-by: Bartlomiej Plotka <bwplotka@gmail.com>
* Trace Remote Write requests
Signed-off-by: Cody Boggs <cboggs@splunk.com>
* Refactor store attempts to keep code flow clearer, and avoid so many places to deal with span finishing
Signed-off-by: Cody Boggs <cboggs@splunk.com>
* Remote store client's `Store` API currently doesn't use passed
context, but instead just constructs a new `context.Background()`
Signed-off-by: Anand Singh Kunwar <anandkunwar95@gmail.com>
* Track remote write queues via a map so we don't care about index.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Support a job name for remote write/read so we can differentiate between
them using the name.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Remote write/read has Name to not confuse the meaning of the field with
scrape job names.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Split queue/client label into remote_name and url labels.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Don't allow for duplicate remote write/read configs.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Ensure we restart remote write queues if the hash of their config has
not changed, but the remote name has changed.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Include name in remote read/write config hashes, simplify duplicates
check, update test accordingly.
Signed-off-by: Callum Styan <callumstyan@gmail.com>
* Show warnings in UI if query have returned some warnings
+ improve warning (error) text if query to remote was finished with error
* Add prefixes for remote_read errors
Signed-off-by: Stan Putrya <root.vagner@gmail.com>
* Update go.mod dependencies before release
Signed-off-by: Julius Volz <julius.volz@gmail.com>
* Add issue for showing query warnings in promtool
Signed-off-by: Julius Volz <julius.volz@gmail.com>
* Revert json-iterator back to 1.1.6
It produced errors when marshaling Point values with special float
values.
Signed-off-by: Julius Volz <julius.volz@gmail.com>
* Fix expected step values in promtool tests after client_golang update
Signed-off-by: Julius Volz <julius.volz@gmail.com>
* Update generated protobuf code after proto dep updates
Signed-off-by: Julius Volz <julius.volz@gmail.com>
From the documentation:
> The default HTTP client's Transport may not
> reuse HTTP/1.x "keep-alive" TCP connections if the Body is
> not read to completion and closed.
This effectively enable keep-alive for the fixed requests.
Signed-off-by: Romain Baugue <romain.baugue@elwinar.com>
i) Uses the more idiomatic Wrap and Wrapf methods for creating nested errors.
ii) Fixes some incorrect usages of fmt.Errorf where the error messages don't have any formatting directives.
iii) Does away with the use of fmt package for errors in favour of pkg/errors
Signed-off-by: tariqibrahim <tariq181290@gmail.com>
This change switches the remote_write API to use the TSDB WAL. This should reduce memory usage and prevent sample loss when the remote end point is down.
We use the new LiveReader from TSDB to tail WAL segments. Logic for finding the tracking segment is included in this PR. The WAL is tailed once for each remote_write endpoint specified. Reading from the segment is based on a ticker rather than relying on fsnotify write events, which were found to be complicated and unreliable in early prototypes.
Enqueuing a sample for sending via remote_write can now block, to provide back pressure. Queues are still required to acheive parallelism and batching. We have updated the queue config based on new defaults for queue capacity and pending samples values - much smaller values are now possible. The remote_write resharding code has been updated to prevent deadlocks, and extra tests have been added for these cases.
As part of this change, we attempt to guarantee that samples are not lost; however this initial version doesn't guarantee this across Prometheus restarts or non-retryable errors from the remote end (eg 400s).
This changes also includes the following optimisations:
- only marshal the proto request once, not once per retry
- maintain a single copy of the labels for given series to reduce GC pressure
Other minor tweaks:
- only reshard if we've also successfully sent recently
- add pending samples, latest sent timestamp, WAL events processed metrics
Co-authored-by: Chris Marchbanks <csmarchbanks.com> (initial prototype)
Co-authored-by: Tom Wilkie <tom.wilkie@gmail.com> (sharding changes)
Signed-off-by: Callum Styan <callumstyan@gmail.com>
Currently Prometheus requests show up with a UA of Go-http-client/1.1
which isn't super helpful. Though the X-Prometheus-Remote-* headers
exist they need to be explicitly configured when logging the request in
order to be able to deduce this is a request originating from
Prometheus. By setting the header we remove this ambiguity and make
default server logs just a bit more useful.
This also updates a few other places to consistently capitalize the 'P'
in the user agent, as well as ensure we set a UA to begin with.
Signed-off-by: Daniele Sluijters <daenney@users.noreply.github.com>
* *: remove use of golang.org/x/net/context
Signed-off-by: Simon Pasquier <spasquie@redhat.com>
* scrape: fix TestTargetScrapeScrapeCancel
Signed-off-by: Simon Pasquier <spasquie@redhat.com>
* refactor: move targetGroup struct and CheckOverflow() to their own package
* refactor: move auth and security related structs to a utility package, fix import error in utility package
* refactor: Azure SD, remove SD struct from config
* refactor: DNS SD, remove SD struct from config into dns package
* refactor: ec2 SD, move SD struct from config into the ec2 package
* refactor: file SD, move SD struct from config to file discovery package
* refactor: gce, move SD struct from config to gce discovery package
* refactor: move HTTPClientConfig and URL into util/config, fix import error in httputil
* refactor: consul, move SD struct from config into consul discovery package
* refactor: marathon, move SD struct from config into marathon discovery package
* refactor: triton, move SD struct from config to triton discovery package, fix test
* refactor: zookeeper, move SD structs from config to zookeeper discovery package
* refactor: openstack, remove SD struct from config, move into openstack discovery package
* refactor: kubernetes, move SD struct from config into kubernetes discovery package
* refactor: notifier, use targetgroup package instead of config
* refactor: tests for file, marathon, triton SD - use targetgroup package instead of config.TargetGroup
* refactor: retrieval, use targetgroup package instead of config.TargetGroup
* refactor: storage, use config util package
* refactor: discovery manager, use targetgroup package instead of config.TargetGroup
* refactor: use HTTPClient and TLS config from configUtil instead of config
* refactor: tests, use targetgroup package instead of config.TargetGroup
* refactor: fix tagetgroup.Group pointers that were removed by mistake
* refactor: openstack, kubernetes: drop prefixes
* refactor: remove import aliases forced due to vscode bug
* refactor: move main SD struct out of config into discovery/config
* refactor: rename configUtil to config_util
* refactor: rename yamlUtil to yaml_config
* refactor: kubernetes, remove prefixes
* refactor: move the TargetGroup package to discovery/
* refactor: fix order of imports
* Decouple remote client from ReadRecent feature.
* Separate remote read filter into a small, testable function.
* Use storage.Queryable interface to compose independent
functionalities.
Currently all read queries are simply pushed to remote read clients.
This is fine, except for remote storage for wich it unefficient and
make query slower even if remote read is unnecessary.
So we need instead to compare the oldest timestamp in primary/local
storage with the query range lower boundary. If the oldest timestamp
is older than the mint parameter, then there is no need for remote read.
This is an optionnal behavior per remote read client.
Signed-off-by: Thibault Chataigner <t.chataigner@criteo.com>
