Currently Prometheus will always request gzip compression from the target when sending scrape requests.
HTTP compression does reduce the amount of bytes sent over the wire and so is often desirable.
The downside of compression is that it requires extra resources - cpu & memory.
This also affects the resource usage on the target since it has to compress the response
before sending it to Prometheus.
This change adds a new option to the scrape job configuration block: enable_compression.
The default is true so it remains the same as current Prometheus behaviour.
Setting this option to false allows users to disable compression between Prometheus
and the scraped target, which will require more bandwidth but it lowers the resource
usage of both Prometheus and the target.
Fixes#12319.
Signed-off-by: Łukasz Mierzwa <l.mierzwa@gmail.com>
* Added ability to specify scrape protocols to accept during HTTP content type negotiation.
This is done via new option in GlobalConfig and ScrapeConfig: "scrape_protocol"
Signed-off-by: bwplotka <bwplotka@gmail.com>
* Fixed readability and log message.
Signed-off-by: bwplotka <bwplotka@gmail.com>
---------
Signed-off-by: bwplotka <bwplotka@gmail.com>
Namely, call out that all subsequent evaluations will be skipped until the initial evaluation completes.
Signed-off-by: Jennifer Villa <jvilla2013@gmail.com>
Addresses: #12536
This commit adds support for configuring sigv4 to an
`alertmanager_config`. Based heavily on the sigv4 work in the remote
write client.
Signed-off-by: TJ Hoplock <t.hoplock@gmail.com>
promql: Extend testing framework to support native histograms
This includes both the internal testing framework as well as the rules unit test feature of promtool.
This also adds a bunch of basic tests. Many of the code level tests can now be converted to tests within the framework, and more tests can be added easily.
---------
Signed-off-by: Harold Dost <h.dost@criteo.com>
Signed-off-by: Gregor Zeitlinger <gregor.zeitlinger@grafana.com>
Signed-off-by: Stephen Lang <stephen.lang@grafana.com>
Co-authored-by: Harold Dost <h.dost@criteo.com>
Co-authored-by: Stephen Lang <stephen.lang@grafana.com>
Co-authored-by: Gregor Zeitlinger <gregor.zeitlinger@grafana.com>
It's possible (quite common on Kubernetes) to have a service discovery
return thousands of targets then drop most of them in relabel rules.
The main place this data is used is to display in the web UI, where
you don't want thousands of lines of display.
The new limit is `keep_dropped_targets`, which defaults to 0
for backwards-compatibility.
Signed-off-by: Bryan Boreham <bjboreham@gmail.com>
Adds a new label to include the ID of the image that an instance is
using. This can be used for example to filter a job to only include
instances using a certain image as that image includes some exporter.
Sometimes the image information isn't available, such as when the image
is private and the user doesn't have the roles required to see it. In
those cases we just don't set the label, as the rest of the information
from the discovery provider can still be used.
Signed-off-by: Taavi Väänänen <hi@taavi.wtf>
Just adding a statement here explaining that the default is an
immediate move to "active" without a pending state.
Signed-off-by: Tim Martin <tim@timmartin.me>
Adds web config option `client_allowed_sans`. This enables Prometheus to
limit the Subject Alternate Name (SAN) allowed to connect.
Signed-off-by: SuperQ <superq@gmail.com>
So far, if a target exposes a histogram with both classic and native
buckets, a native-histogram enabled Prometheus would ignore the
classic buckets. With the new scrape config option
`scrape_classic_histograms` set, both buckets will be ingested,
creating all the series of a classic histogram in parallel to the
native histogram series. For example, a histogram `foo` would create a
native histogram series `foo` and classic series called `foo_sum`,
`foo_count`, and `foo_bucket`.
This feature can be used in a migration strategy from classic to
native histograms, where it is desired to have a transition period
during which both native and classic histograms are present.
Note that two bugs in classic histogram parsing were found and fixed
as a byproduct of testing the new feature:
1. Series created from classic _gauge_ histograms didn't get the
_sum/_count/_bucket prefix set.
2. Values of classic _float_ histograms weren't parsed properly.
Signed-off-by: beorn7 <beorn@grafana.com>
This commit adds a new 'keep_firing_for' field to Prometheus alerting
rules. The 'resolve_delay' field specifies the minimum amount of time
that an alert should remain firing, even if the expression does not
return any results.
This feature was discussed at a previous dev summit, and it was
determined that a feature like this would be useful in order to allow
the expression time to stabilize and prevent confusing resolved messages
from being propagated through Alertmanager.
This approach is simpler than having two PromQL queries, as was
sometimes discussed, and it should be easy to implement.
This commit does not include tests for the 'resolve_delay' field. This
is intentional, as the purpose of this commit is to gather comments on
the proposed design of the 'resolve_delay' field before implementing
tests. Once the design of the 'resolve_delay' field has been finalized,
a follow-up commit will be submitted with tests."
See https://github.com/prometheus/prometheus/issues/11570
Signed-off-by: Julien Pivotto <roidelapluie@o11y.eu>
* Update docs example rules for default config
The prometheus download includes a default config to scrape itself.
This self-scraping prometheus doesn't include any metric named as
`http_inprogress_requests`, but does include one named
`prometheus_http_requests_total`.
Updating this example rule in the docs to one which can be used
out-of-the-box with the default download would be a nice improvement.
Signed-off-by: Sam Jewell <sam.jewell@grafana.com>
* Update syntax as per @LeviHarrison's review
Co-authored-by: Levi Harrison <levisamuelharrison@gmail.com>
Signed-off-by: Sam Jewell <2903904+samjewell@users.noreply.github.com>
Signed-off-by: Sam Jewell <sam.jewell@grafana.com>
Signed-off-by: Sam Jewell <2903904+samjewell@users.noreply.github.com>
Co-authored-by: Levi Harrison <levisamuelharrison@gmail.com>
Since the struct defines proxy_connect_header instead of proxy_connect_headers, all relevant occurences of it were replaced with the correct configuration name as defined in the HTTPClientConfig struct.
Signed-off-by: Robbe Haesendonck <googleit@inuits.eu>
* Add VM size label to azure service discovery (#11575)
Signed-off-by: davidifr <davidfr.mail@gmail.com>
* Add VM size label to azure service discovery (#11575)
Signed-off-by: davidifr <davidfr.mail@gmail.com>
* Add VM size label to azure service discovery (#11575)
Signed-off-by: davidifr <davidfr.mail@gmail.com>
Signed-off-by: davidifr <davidfr.mail@gmail.com>
* docs: Add link to best practices in "Defining Recording Rules" page
Signed-off-by: John Carlo Roberto <10111643+Irizwaririz@users.noreply.github.com>
* docs: Improve wording
Signed-off-by: John Carlo Roberto <10111643+Irizwaririz@users.noreply.github.com>
Signed-off-by: John Carlo Roberto <10111643+Irizwaririz@users.noreply.github.com>
* Common client in EC2 and Lightsail
Signed-off-by: Levi Harrison <git@leviharrison.dev>
* Azure -> AWS
Signed-off-by: Levi Harrison <git@leviharrison.dev>
Signed-off-by: Levi Harrison <git@leviharrison.dev>
This PR updates the Serverset url at the configuration.md documentation.
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
Currently, it's not explicitly called out which permissions are needed
for service discovery of EC2 instances. It's not super hard to figure
out, but it did involve a bit of guesswork when I did it yesterday, and
I figure it's worth saving people that effort.
I've also seen examples around the internet where people are granting
much broader permissions than they need to, so maybe we can save on that
by explicitly saying what's needed.
Signed-off-by: Chris Sinjakli <chris@sinjakli.co.uk>
It's currently possible to use blackbox_exporter to probe MX records
themselves. However it's not possible to do an end-to-end test, like is
possible with SRV records. This makes it possible to use MX records as a
source of hostnames in the same way as SRV records.
Signed-off-by: David Leadbeater <dgl@dgl.cx>
Signed-off-by: Jonathan Stevens <jonathanstevens89@gmail.com>
Signed-off-by: Jonathan Stevens <jon.stevens@getweave.com>
Co-authored-by: Jonathan Stevens <jon.stevens@getweave.com>
* add description for __meta_kubernetes_endpoints_label_* and __meta_kubernetes_endpoints_labelpresent_*
Signed-off-by: renzheng.wang <wangrzneu@gmail.com>
The Kubernetes service discovery can only add node labels to
targets from the pod role.
This commit extends this functionality to the endpoints and
endpointslices roles.
Signed-off-by: Filip Petkovski <filip.petkovsky@gmail.com>
