This change does just signal a scrape target update to the scraping loop
once an initial target set is fetched.
Before, the scrape pool was directly synced, causing a race against an
uninitialized scrape pool.
Fixes#1703
This change does just signal a scrape target update to the scraping loop
once an initial target set is fetched.
Before, the scrape pool was directly synced, causing a race against an
uninitialized scrape pool.
Fixes#1703
The concurrency applied before is in most cases not even needed. With
a cap=1 channel, most tests are much cleaner.
TestMarathonSDRunAndStop was trickier. It could even have blocked
before.
This also includes a general refactoring of the whole file.
This change deprecates the `target_groups` option in favor
of `static_configs`. The old configuration is still accepted
but prints a warning.
Configuration loading errors if both options are set.
From the documentation and current tests, it wasn't immediately clear to
me whether the `target` being dropped as the result of a 'drop' action
was a label key-value pair or the entire labelset.
Add a test that documents this behaviour.
Documentation: https://prometheus.io/docs/operating/configuration/
So far, out-of-order samples during rule evaluation were not logged,
and neither scrape health samples. The latter are unlikely to cause
any errors. That's why I'm logging them always now. (It's alway highly
irregular should it happen.) For rules, I have used the same plumbing
as for samples, just with a different wording in the message to mark
them as a result of rule evaluation.
But only on DEBUG level.
Also, count and report the two cases of out-of-order timestamps on the
one hand and same timestamp but different value on the other hand
separately.
Prometheus is Apache 2 licensed, and most source files have the
appropriate copyright license header, but some were missing it without
apparent reason. Correct that by adding it.
This fixes the case where a target provider closes the update
channel and exits before the context is canceled.
This should only be true for the static provider but it's safer
to generally handle this case.
This commit simplifies the TargetHealth type and moves the target
status into the target itself. This also removes a race where error
and last scrape time could have been out of sync.
This commit removes the scrapeConfig entirely from Target.
All identity defining parameters are thus immutable now and the mutex
can be removed..
Target identity is now correctly defined by the labels and the full URL.
This in particular includes URL parameters that are not specified in the
label set.
Fingerprint is also removed from hash to remove an unnecessary tight coupling
to the common/model package.
With this commit the scrape pool deduplicates incoming
targets before scraping them. This way multiple target providers
can produce the same target but it will be scraped only once.
This commit updates a target set's scrape configuration
on reload. This will cause all running scrape loops to be
stopped and started again with new parameters.
This commit changes the scraper interface to accept a timestamp
so the reported timestamp by the caller and the timestamp
attached to samples does not differ.
This commit moves Scraper handling into a separate scrapePool type.
TargetSets only manage TargetProvider lifecycles and sync the
retrieved updates to the scrapePool.
TargetProviders are now expected to send a full initial target set
within 5 seconds. The scrapePools preserve target state across reloads
and only drop targets after the initial set was synced.
We group providers by their scrape configuration. Each provider produces
target groups with an unique identifier.
On stopping a set of target providers we cancel the target providers,
stop scraping the targets and wait for the scrapers to finish.
On configuration reload all provider sets are stopped and new ones
are created. This will make targets disappear briefly on configuration
reload. Potentially scrapes are missed but due to the consistent
scrape intervals implemented recently, the impact is minor.
Double acquisition of the RLock usually doesn't blow up, but if the
write lock is called for between the two RLock's, we are deadlocked.
This deadlock does not exist in release-0.17, BTW.
With recent changes to a Target's internal data representation
updating by fullLabels() assigns the additional default
instance label. This breaks target identity comparison and causes
identical targets from service discovery to be constantly swapped.
So far we were using the InstanceIdentifier to compare equality of targets.
This is not always accurate, for example for the blackbox exporter where the
actual target is in the parameter.
For historic reasons we were enforcing a timeout directly
via the TCP dialer. This is no longer necessary for quite a while now.
Switching to context.Context will allow us to properly terminate
requests on shutdown as well.
To evenly distribute scraping load we currently rely on random
jittering. This commit hashes over the target's identity and calculates
a consistent offset. This also ensures that scrape intervals
are constantly spaced between config/target changes.
This gives up on the idea to communicate throuh the Append() call (by
either not returning as it is now or returning an error as
suggested/explored elsewhere). Here I have added a Throttled() call,
which has the advantage that it can be called before a whole _batch_
of Append()'s. Scrapes will happen completely or not at all. Same for
rule group evaluations. That's a highly desired behavior (as discussed
elsewhere). The code is even simpler now as the whole ingestion buffer
could be removed.
Logging of throttled mode has been streamlined and will create at most
one message per minute.
It's actually happening in several places (and for flags, we use the
standard Go time.Duration...). This at least reduces all our
home-grown parsing to one place (in model).
nerve's registration format differs from serverset. With this commit
there is now a dedicated treecache file in util,
and two separate files for serverset and nerve.
Reference:
https://github.com/airbnb/nerve
For the SNMP and blackbox exporters where
the ports tends to not be 80/443 and indeed
there may not be a port this makes the relabelling
a bit simpler as you don't have to figure out this
logic exists and strip off the :80.
This is a breaking change for the example configs of
those exporters.
With the blackbox exporter, the instance label will commonly
be used for things other than hostnames so remove this restriction.
https://example.com or https://example.com/probe/me are some examples.
To prevent user error, check that urls aren't provided as targets
when there's no relabelling that could potentically fix them.
1. static credentials replaced with defaults.DefaultChainCredentials.
This change ensures that credentials are sourced form all possible
providers available with the aws sdk, in the following order:
env variables, shared awsconfig file in user folder, ec2 instance role.
2. Added a few labels: AvailabilityZone, PublicDns, VpcId (if
available), SubnetId (if in Vpc)
The prefixed target provider changed a pointerized target group that was
reused in the wrapped target provider, causing an ever-increasing chain
of source prefixes in target groups from the Consul target provider.
We now make this bug generally impossible by switching the target group
channel from pointer to value type and thus ensuring that target groups
are copied before being passed on to other parts of the system.
I tried to not let the depointerization leak too far outside of the
channel handling (both upstream and downstream) because I tried that
initially and caused some nasty bugs, which I want to minimize.
Fixes https://github.com/prometheus/prometheus/issues/1083
Bump timeouts of tests where we don't want I/O timeouts.
Adjust the full channel test to be much more reliable,
by reducing the ingestion timeout from 1ms to 0.
Move defer resp.Body.Close() up to make sure it's called even when the
HTTP request returns something other than 200 or Decoder construction
fails. This avoids leaking and eventually running out of file descriptors.
* Support multiple masters with retries against each master as required.
* Scrape masters' metrics.
* Add role meta label for node/service/master to make it easier for relabeling.
When the test ends, all files matching the watcher's glob are removed
via defer. In that moment, the draining goroutine may still be running
and then detect no files matching the configured glob just before the
test exits.
This is now solved by waiting for the draining goroutine to finish
before leaving the test function and thus causing the deferred file
removal.
This is with `golint -min_confidence=0.5`.
I left several lint warnings untouched because they were either
incorrect or I felt it was better not to change them at the moment.
merge() closes the channel that handleUpdates() reads from when there
are zero configured target providers in the configuration. In that case,
the for-select loop in handleUpdates() entered a busy loop. It should
exit when the upstream channel is closed.
Instead of only filling __meta_consul_dc when datacenter is set in
consul_sd_config this change fills the label based on what the agent
reports it's current data center is, if datacenter isn't manually set,
otherwise it uses whatever datacenter was set to.
ReplaceAllString only replaces the matching part of the regex,
the unmatched bits around it are left in place. This is not the
expected or desired behaviour as the replacement string should
be everything.
This may break users dependant on this behaviour, but
what they're doing is still possible.
The intended use case is where a user has tags/labels coming
from metadata in Kubernetes or EC2, and wants to make
some subset of them into target labels.
Include position of same SD mechanisms within the same scrape configuration.
Move unique prefixing out of SD implementations and target manager into
its own interface.
Allow scrape_configs to have an optional proxy_url option which specifies
a proxy to be used for all connections to hosts in that config.
Internally this modifies the various client functions to take a *url.URL pointer
which currently must point to an HTTP proxy (but has been left open-ended to
allow the url format to be extended to support others, such as maybe SOCKS if
needed).
In setups where the ServiceAddress is the relevant address for
scraping, users can relabel the `__address__` label to ServiceAddress
+ ":" + ServicePort.
This needs to be documented, of course. Will do once this is LGTM'd.
This takes the modulus of a hash of some labels.
Combined with a keep relabel action, this allows
for sharding of targets across multiple prometheus
servers.
Changes to the UI:
- "Active Since" timestamps are now human-readable.
- Alerting rules are now pretty-printed better.
- Labels are no longer just strings, but alert bubbles (like we do on
the status page for base labels).
- Alert states and target health states are now capitalized in the
presentation layer rather than at the source.
This commit adds the honor_labels and params arguments to the scrape
config. This allows to specify query parameters used by the scrapers
and handling scraped labels with precedence.
The main purpose of this is to allow for blacklisting
of expensive metrics as a tactical option.
It could also find uses for renaming and removing labels
from federation.
The main purpose of this is to allow for blacklisting
of expensive metrics as a tactical option.
It could also find uses for renaming and removing labels
from federation.
Figuring out what's going on with the new service discovery
and labels is difficult. Add a popover with the labels
to the target table to make things simpler, and help
discovery of potentially useful labels.
TargetProviders may flush some last changes to the target manager
before actually stopping. To properly read those form the channel
the target manager must not be locked while stopping a provider.
This calculates how much a counter increases over
a given period of time, which is the area under the curve
of it's rate.
increase(x[5m]) is equivilent to rate(x[5m]) * 300.
This change is conceptually very simple, although the diff is large. It
switches logging from "github.com/golang/glog" to
"github.com/prometheus/log", while not actually changing any log
messages. V(1)-style logging has been changed to be log.Debug*().
Appending to the storage can block for a long time. Timing out
scrapes can also cause longer blocks. This commit avoids that those
blocks affect other compnents than the target itself.
Also the Target interface was removed.
The target implementation and interface contain methods only serving a
specific purpose of the templates. They were moved to the template
as they operate on more fundamental target data.
Some SD configs may have many options. To be readable and consistent, make
all discovery constructors receive the full config rather than the separate
arguments.
This commits adds file based service discovery which reads target
groups from specified files. It detects changes based on file watches
and regular refreshes.
With this commit, sending SIGHUP to the Prometheus process will reload
and apply the configuration file. The different components attempt
to handle failing changes gracefully.
This commit adds a relabelling stage on the set of base
labels from which a target is created. It allows to drop
targets and rewrite any regular or internal label.
This commit changes the configuration interface from job configs to scrape
configs. This includes allowing multiple ways of target definition at once
and moving DNS SD to its own config message. DNS SD can now contain multiple
DNS names per configured discovery.
This commit shifts responsibility for maintaining targets from providers and
pools to the target manager. Target groups have a source name that identifies
them for updates.
/api/targets was undocumented and never used and also broken.
Showing instance and job labels on the status page (next to targets)
does not make sense as those labels are set in an obvious way.
Also add a doc comment to TargetStateToClass.
The one central sample ingestion channel has caused a variety of
trouble. This commit removes it. Targets and rule evaluation call an
Append method directly now. To incorporate multiple storage backends
(like OpenTSDB), storage.Tee forks the Append into two different
appenders.
Note that the tsdb queue manager had its own queue anyway. It was a
queue after a queue... Much queue, so overhead...
Targets have their own little buffer (implemented as a channel) to
avoid stalling during an http scrape. But a new scrape will only be
started once the old one is fully ingested.
The contraption of three pipelined ingesters was removed. A Target is
an ingester itself now. Despite more logic in Target, things should be
less confusing now.
Also, remove lint and vet warnings in ast.go.
The current wording suggests that a target is not reachable at all,
although it might also get set when the target was reachable, but there
was some other error during the scrape (invalid headers or invalid
scrape content). UNHEALTHY is a more general wording that includes all
these cases.
For consistency, ALIVE is also renamed to HEALTHY.
We were using Godep incorrectly (cloning repos from the internet during
build time instead of including Godeps/_workspace in the GOPATH via
"godep go"). However, to avoid even having to fetch "godeps" from the
internet during build, this now just copies the vendored files into the
GOPATH.
Also, the protocol buffer library moved from Google Code to GitHub,
which is reflected in these updates.
This fixes https://github.com/prometheus/prometheus/issues/525
