prometheus/vendor/k8s.io/api/networking/v1beta1/generated.proto

/*
Copyright The Kubernetes Authors.

Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/


// This file was autogenerated by go-to-protobuf. Do not edit it manually!

syntax = 'proto2';

package k8s.io.api.networking.v1beta1;

import "k8s.io/api/core/v1/generated.proto";
import "k8s.io/apimachinery/pkg/apis/meta/v1/generated.proto";
import "k8s.io/apimachinery/pkg/runtime/generated.proto";
import "k8s.io/apimachinery/pkg/runtime/schema/generated.proto";
import "k8s.io/apimachinery/pkg/util/intstr/generated.proto";

// Package-wide variables from generator "generated".
option go_package = "v1beta1";

// HTTPIngressPath associates a path regex with a backend. Incoming urls matching
// the path are forwarded to the backend.
message HTTPIngressPath {
  // Path is an extended POSIX regex as defined by IEEE Std 1003.1,
  // (i.e this follows the egrep/unix syntax, not the perl syntax)
  // matched against the path of an incoming request. Currently it can
  // contain characters disallowed from the conventional "path"
  // part of a URL as defined by RFC 3986. Paths must begin with
  // a '/'. If unspecified, the path defaults to a catch all sending
  // traffic to the backend.
  // +optional
  optional string path = 1;

  // Backend defines the referenced service endpoint to which the traffic
  // will be forwarded to.
  optional IngressBackend backend = 2;
}

// HTTPIngressRuleValue is a list of http selectors pointing to backends.
// In the example: http://<host>/<path>?<searchpart> -> backend where
// where parts of the url correspond to RFC 3986, this resource will be used
// to match against everything after the last '/' and before the first '?'
// or '#'.
message HTTPIngressRuleValue {
  // A collection of paths that map requests to backends.
  repeated HTTPIngressPath paths = 1;
}

// Ingress is a collection of rules that allow inbound connections to reach the
// endpoints defined by a backend. An Ingress can be configured to give services
// externally-reachable urls, load balance traffic, terminate SSL, offer name
// based virtual hosting etc.
message Ingress {
  // Standard object's metadata.
  // More info: https://git.k8s.io/community/contributors/devel/api-conventions.md#metadata
  // +optional
  optional k8s.io.apimachinery.pkg.apis.meta.v1.ObjectMeta metadata = 1;

  // Spec is the desired state of the Ingress.
  // More info: https://git.k8s.io/community/contributors/devel/api-conventions.md#spec-and-status
  // +optional
  optional IngressSpec spec = 2;

  // Status is the current state of the Ingress.
  // More info: https://git.k8s.io/community/contributors/devel/api-conventions.md#spec-and-status
  // +optional
  optional IngressStatus status = 3;
}

// IngressBackend describes all endpoints for a given service and port.
message IngressBackend {
  // Specifies the name of the referenced service.
  optional string serviceName = 1;

  // Specifies the port of the referenced service.
  optional k8s.io.apimachinery.pkg.util.intstr.IntOrString servicePort = 2;
}

// IngressList is a collection of Ingress.
message IngressList {
  // Standard object's metadata.
  // More info: https://git.k8s.io/community/contributors/devel/api-conventions.md#metadata
  // +optional
  optional k8s.io.apimachinery.pkg.apis.meta.v1.ListMeta metadata = 1;

  // Items is the list of Ingress.
  repeated Ingress items = 2;
}

// IngressRule represents the rules mapping the paths under a specified host to
// the related backend services. Incoming requests are first evaluated for a host
// match, then routed to the backend associated with the matching IngressRuleValue.
message IngressRule {
  // Host is the fully qualified domain name of a network host, as defined
  // by RFC 3986. Note the following deviations from the "host" part of the
  // URI as defined in the RFC:
  // 1. IPs are not allowed. Currently an IngressRuleValue can only apply to the
  // 	  IP in the Spec of the parent Ingress.
  // 2. The `:` delimiter is not respected because ports are not allowed.
  // 	  Currently the port of an Ingress is implicitly :80 for http and
  // 	  :443 for https.
  // Both these may change in the future.
  // Incoming requests are matched against the host before the IngressRuleValue.
  // If the host is unspecified, the Ingress routes all traffic based on the
  // specified IngressRuleValue.
  // +optional
  optional string host = 1;

  // IngressRuleValue represents a rule to route requests for this IngressRule.
  // If unspecified, the rule defaults to a http catch-all. Whether that sends
  // just traffic matching the host to the default backend or all traffic to the
  // default backend, is left to the controller fulfilling the Ingress. Http is
  // currently the only supported IngressRuleValue.
  // +optional
  optional IngressRuleValue ingressRuleValue = 2;
}

// IngressRuleValue represents a rule to apply against incoming requests. If the
// rule is satisfied, the request is routed to the specified backend. Currently
// mixing different types of rules in a single Ingress is disallowed, so exactly
// one of the following must be set.
message IngressRuleValue {
  // +optional
  optional HTTPIngressRuleValue http = 1;
}

// IngressSpec describes the Ingress the user wishes to exist.
message IngressSpec {
  // A default backend capable of servicing requests that don't match any
  // rule. At least one of 'backend' or 'rules' must be specified. This field
  // is optional to allow the loadbalancer controller or defaulting logic to
  // specify a global default.
  // +optional
  optional IngressBackend backend = 1;

  // TLS configuration. Currently the Ingress only supports a single TLS
  // port, 443. If multiple members of this list specify different hosts, they
  // will be multiplexed on the same port according to the hostname specified
  // through the SNI TLS extension, if the ingress controller fulfilling the
  // ingress supports SNI.
  // +optional
  repeated IngressTLS tls = 2;

  // A list of host rules used to configure the Ingress. If unspecified, or
  // no rule matches, all traffic is sent to the default backend.
  // +optional
  repeated IngressRule rules = 3;
}

// IngressStatus describe the current state of the Ingress.
message IngressStatus {
  // LoadBalancer contains the current status of the load-balancer.
  // +optional
  optional k8s.io.api.core.v1.LoadBalancerStatus loadBalancer = 1;
}

// IngressTLS describes the transport layer security associated with an Ingress.
message IngressTLS {
  // Hosts are a list of hosts included in the TLS certificate. The values in
  // this list must match the name/s used in the tlsSecret. Defaults to the
  // wildcard host setting for the loadbalancer controller fulfilling this
  // Ingress, if left unspecified.
  // +optional
  repeated string hosts = 1;

  // SecretName is the name of the secret used to terminate SSL traffic on 443.
  // Field is left optional to allow SSL routing based on SNI hostname alone.
  // If the SNI host in a listener conflicts with the "Host" header field used
  // by an IngressRule, the SNI host is used for termination and value of the
  // Host header is used for routing.
  // +optional
  optional string secretName = 2;
}