prometheus/tsdb/chunks/old_head_chunks.go

// Copyright 2020 The Prometheus Authors
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

package chunks

import (
	"bufio"
	"bytes"
	"encoding/binary"
	"hash"
	"io"
	"os"
	"sort"
	"sync"

	"github.com/pkg/errors"
	"go.uber.org/atomic"

	"github.com/prometheus/prometheus/tsdb/chunkenc"
	tsdb_errors "github.com/prometheus/prometheus/tsdb/errors"
	"github.com/prometheus/prometheus/tsdb/fileutil"
)

// OldChunkDiskMapper is for writing the Head block chunks to the disk
// and access chunks via mmapped file.
type OldChunkDiskMapper struct {
	curFileNumBytes atomic.Int64 // Bytes written in current open file.

	/// Writer.
	dir             *os.File
	writeBufferSize int

	curFile         *os.File // File being written to.
	curFileSequence int      // Index of current open file being appended to.
	curFileMaxt     int64    // Used for the size retention.

	byteBuf      [MaxHeadChunkMetaSize]byte // Buffer used to write the header of the chunk.
	chkWriter    *bufio.Writer              // Writer for the current open file.
	crc32        hash.Hash
	writePathMtx sync.Mutex

	/// Reader.
	// The int key in the map is the file number on the disk.
	mmappedChunkFiles map[int]*mmappedChunkFile // Contains the m-mapped files for each chunk file mapped with its index.
	closers           map[int]io.Closer         // Closers for resources behind the byte slices.
	readPathMtx       sync.RWMutex              // Mutex used to protect the above 2 maps.
	pool              chunkenc.Pool             // This is used when fetching a chunk from the disk to allocate a chunk.

	// Writer and Reader.
	// We flush chunks to disk in batches. Hence, we store them in this buffer
	// from which chunks are served till they are flushed and are ready for m-mapping.
	chunkBuffer *chunkBuffer

	// Whether the maxt field is set for all mmapped chunk files tracked within the mmappedChunkFiles map.
	// This is done after iterating through all the chunks in those files using the IterateAllChunks method.
	fileMaxtSet bool

	closed bool
}

// NewOldChunkDiskMapper returns a new ChunkDiskMapper against the given directory
// using the default head chunk file duration.
// NOTE: 'IterateAllChunks' method needs to be called at least once after creating ChunkDiskMapper
// to set the maxt of all the file.
func NewOldChunkDiskMapper(dir string, pool chunkenc.Pool, writeBufferSize int) (*OldChunkDiskMapper, error) {
	// Validate write buffer size.
	if writeBufferSize < MinWriteBufferSize || writeBufferSize > MaxWriteBufferSize {
		return nil, errors.Errorf("ChunkDiskMapper write buffer size should be between %d and %d (actual: %d)", MinWriteBufferSize, MaxWriteBufferSize, writeBufferSize)
	}
	if writeBufferSize%1024 != 0 {
		return nil, errors.Errorf("ChunkDiskMapper write buffer size should be a multiple of 1024 (actual: %d)", writeBufferSize)
	}

	if err := os.MkdirAll(dir, 0o777); err != nil {
		return nil, err
	}
	dirFile, err := fileutil.OpenDir(dir)
	if err != nil {
		return nil, err
	}

	m := &OldChunkDiskMapper{
		dir:             dirFile,
		pool:            pool,
		writeBufferSize: writeBufferSize,
		crc32:           newCRC32(),
		chunkBuffer:     newChunkBuffer(),
	}

	if m.pool == nil {
		m.pool = chunkenc.NewPool()
	}

	return m, m.openMMapFiles()
}

// openMMapFiles opens all files within dir for mmapping.
func (cdm *OldChunkDiskMapper) openMMapFiles() (returnErr error) {
	cdm.mmappedChunkFiles = map[int]*mmappedChunkFile{}
	cdm.closers = map[int]io.Closer{}
	defer func() {
		if returnErr != nil {
			returnErr = tsdb_errors.NewMulti(returnErr, closeAllFromMap(cdm.closers)).Err()

			cdm.mmappedChunkFiles = nil
			cdm.closers = nil
		}
	}()

	files, err := listChunkFiles(cdm.dir.Name())
	if err != nil {
		return err
	}

	files, err = repairLastChunkFile(files)
	if err != nil {
		return err
	}

	chkFileIndices := make([]int, 0, len(files))
	for seq, fn := range files {
		f, err := fileutil.OpenMmapFile(fn)
		if err != nil {
			return errors.Wrapf(err, "mmap files, file: %s", fn)
		}
		cdm.closers[seq] = f
		cdm.mmappedChunkFiles[seq] = &mmappedChunkFile{byteSlice: realByteSlice(f.Bytes())}
		chkFileIndices = append(chkFileIndices, seq)
	}

	// Check for gaps in the files.
	sort.Ints(chkFileIndices)
	if len(chkFileIndices) == 0 {
		return nil
	}
	lastSeq := chkFileIndices[0]
	for _, seq := range chkFileIndices[1:] {
		if seq != lastSeq+1 {
			return errors.Errorf("found unsequential head chunk files %s (index: %d) and %s (index: %d)", files[lastSeq], lastSeq, files[seq], seq)
		}
		lastSeq = seq
	}

	for i, b := range cdm.mmappedChunkFiles {
		if b.byteSlice.Len() < HeadChunkFileHeaderSize {
			return errors.Wrapf(errInvalidSize, "%s: invalid head chunk file header", files[i])
		}
		// Verify magic number.
		if m := binary.BigEndian.Uint32(b.byteSlice.Range(0, MagicChunksSize)); m != MagicHeadChunks {
			return errors.Errorf("%s: invalid magic number %x", files[i], m)
		}

		// Verify chunk format version.
		if v := int(b.byteSlice.Range(MagicChunksSize, MagicChunksSize+ChunksFormatVersionSize)[0]); v != chunksFormatV1 {
			return errors.Errorf("%s: invalid chunk format version %d", files[i], v)
		}
	}

	return nil
}

// WriteChunk writes the chunk to the disk.
// The returned chunk ref is the reference from where the chunk encoding starts for the chunk.
func (cdm *OldChunkDiskMapper) WriteChunk(seriesRef HeadSeriesRef, mint, maxt int64, chk chunkenc.Chunk, callback func(err error)) (chkRef ChunkDiskMapperRef) {
	chkRef, err := func() (ChunkDiskMapperRef, error) {
		cdm.writePathMtx.Lock()
		defer cdm.writePathMtx.Unlock()

		if cdm.closed {
			return 0, ErrChunkDiskMapperClosed
		}

		if cdm.shouldCutNewFile(len(chk.Bytes())) {
			if err := cdm.cut(); err != nil {
				return 0, err
			}
		}

		// if len(chk.Bytes())+MaxHeadChunkMetaSize >= writeBufferSize, it means that chunk >= the buffer size;
		// so no need to flush here, as we have to flush at the end (to not keep partial chunks in buffer).
		if len(chk.Bytes())+MaxHeadChunkMetaSize < cdm.writeBufferSize && cdm.chkWriter.Available() < MaxHeadChunkMetaSize+len(chk.Bytes()) {
			if err := cdm.flushBuffer(); err != nil {
				return 0, err
			}
		}

		cdm.crc32.Reset()
		bytesWritten := 0

		chkRef = newChunkDiskMapperRef(uint64(cdm.curFileSequence), uint64(cdm.curFileSize()))

		binary.BigEndian.PutUint64(cdm.byteBuf[bytesWritten:], uint64(seriesRef))
		bytesWritten += SeriesRefSize
		binary.BigEndian.PutUint64(cdm.byteBuf[bytesWritten:], uint64(mint))
		bytesWritten += MintMaxtSize
		binary.BigEndian.PutUint64(cdm.byteBuf[bytesWritten:], uint64(maxt))
		bytesWritten += MintMaxtSize
		cdm.byteBuf[bytesWritten] = byte(chk.Encoding())
		bytesWritten += ChunkEncodingSize
		n := binary.PutUvarint(cdm.byteBuf[bytesWritten:], uint64(len(chk.Bytes())))
		bytesWritten += n

		if err := cdm.writeAndAppendToCRC32(cdm.byteBuf[:bytesWritten]); err != nil {
			return 0, err
		}
		if err := cdm.writeAndAppendToCRC32(chk.Bytes()); err != nil {
			return 0, err
		}
		if err := cdm.writeCRC32(); err != nil {
			return 0, err
		}

		if maxt > cdm.curFileMaxt {
			cdm.curFileMaxt = maxt
		}

		cdm.chunkBuffer.put(chkRef, chk)

		if len(chk.Bytes())+MaxHeadChunkMetaSize >= cdm.writeBufferSize {
			// The chunk was bigger than the buffer itself.
			// Flushing to not keep partial chunks in buffer.
			if err := cdm.flushBuffer(); err != nil {
				return 0, err
			}
		}

		return chkRef, nil
	}()

	if err != nil && callback != nil {
		callback(err)
	}

	return chkRef
}

// shouldCutNewFile returns whether a new file should be cut, based on time and size retention.
// Size retention: because depending on the system architecture, there is a limit on how big of a file we can m-map.
// Time retention: so that we can delete old chunks with some time guarantee in low load environments.
func (cdm *OldChunkDiskMapper) shouldCutNewFile(chunkSize int) bool {
	return cdm.curFileSize() == 0 || // First head chunk file.
		cdm.curFileSize()+int64(chunkSize+MaxHeadChunkMetaSize) > MaxHeadChunkFileSize // Exceeds the max head chunk file size.
}

// CutNewFile creates a new m-mapped file.
func (cdm *OldChunkDiskMapper) CutNewFile() (returnErr error) {
	cdm.writePathMtx.Lock()
	defer cdm.writePathMtx.Unlock()

	return cdm.cut()
}

// cut creates a new m-mapped file. The write lock should be held before calling this.
func (cdm *OldChunkDiskMapper) cut() (returnErr error) {
	// Sync current tail to disk and close.
	if err := cdm.finalizeCurFile(); err != nil {
		return err
	}

	n, newFile, seq, err := cutSegmentFile(cdm.dir, MagicHeadChunks, headChunksFormatV1, HeadChunkFilePreallocationSize)
	if err != nil {
		return err
	}
	defer func() {
		// The file should not be closed if there is no error,
		// its kept open in the ChunkDiskMapper.
		if returnErr != nil {
			returnErr = tsdb_errors.NewMulti(returnErr, newFile.Close()).Err()
		}
	}()

	cdm.curFileNumBytes.Store(int64(n))

	if cdm.curFile != nil {
		cdm.readPathMtx.Lock()
		cdm.mmappedChunkFiles[cdm.curFileSequence].maxt = cdm.curFileMaxt
		cdm.readPathMtx.Unlock()
	}

	mmapFile, err := fileutil.OpenMmapFileWithSize(newFile.Name(), MaxHeadChunkFileSize)
	if err != nil {
		return err
	}

	cdm.readPathMtx.Lock()
	cdm.curFileSequence = seq
	cdm.curFile = newFile
	if cdm.chkWriter != nil {
		cdm.chkWriter.Reset(newFile)
	} else {
		cdm.chkWriter = bufio.NewWriterSize(newFile, cdm.writeBufferSize)
	}

	cdm.closers[cdm.curFileSequence] = mmapFile
	cdm.mmappedChunkFiles[cdm.curFileSequence] = &mmappedChunkFile{byteSlice: realByteSlice(mmapFile.Bytes())}
	cdm.readPathMtx.Unlock()

	cdm.curFileMaxt = 0

	return nil
}

// finalizeCurFile writes all pending data to the current tail file,
// truncates its size, and closes it.
func (cdm *OldChunkDiskMapper) finalizeCurFile() error {
	if cdm.curFile == nil {
		return nil
	}

	if err := cdm.flushBuffer(); err != nil {
		return err
	}

	if err := cdm.curFile.Sync(); err != nil {
		return err
	}

	return cdm.curFile.Close()
}

func (cdm *OldChunkDiskMapper) write(b []byte) error {
	n, err := cdm.chkWriter.Write(b)
	cdm.curFileNumBytes.Add(int64(n))
	return err
}

func (cdm *OldChunkDiskMapper) writeAndAppendToCRC32(b []byte) error {
	if err := cdm.write(b); err != nil {
		return err
	}
	_, err := cdm.crc32.Write(b)
	return err
}

func (cdm *OldChunkDiskMapper) writeCRC32() error {
	return cdm.write(cdm.crc32.Sum(cdm.byteBuf[:0]))
}

// flushBuffer flushes the current in-memory chunks.
// Assumes that writePathMtx is _write_ locked before calling this method.
func (cdm *OldChunkDiskMapper) flushBuffer() error {
	if err := cdm.chkWriter.Flush(); err != nil {
		return err
	}
	cdm.chunkBuffer.clear()
	return nil
}

// Chunk returns a chunk from a given reference.
func (cdm *OldChunkDiskMapper) Chunk(ref ChunkDiskMapperRef) (chunkenc.Chunk, error) {
	cdm.readPathMtx.RLock()
	// We hold this read lock for the entire duration because if Close()
	// is called, the data in the byte slice will get corrupted as the mmapped
	// file will be closed.
	defer cdm.readPathMtx.RUnlock()

	if cdm.closed {
		return nil, ErrChunkDiskMapperClosed
	}

	sgmIndex, chkStart := ref.Unpack()
	// We skip the series ref and the mint/maxt beforehand.
	chkStart += SeriesRefSize + (2 * MintMaxtSize)
	chkCRC32 := newCRC32()

	// If it is the current open file, then the chunks can be in the buffer too.
	if sgmIndex == cdm.curFileSequence {
		chunk := cdm.chunkBuffer.get(ref)
		if chunk != nil {
			return chunk, nil
		}
	}

	mmapFile, ok := cdm.mmappedChunkFiles[sgmIndex]
	if !ok {
		if sgmIndex > cdm.curFileSequence {
			return nil, &CorruptionErr{
				Dir:       cdm.dir.Name(),
				FileIndex: -1,
				Err:       errors.Errorf("head chunk file index %d more than current open file", sgmIndex),
			}
		}
		return nil, &CorruptionErr{
			Dir:       cdm.dir.Name(),
			FileIndex: sgmIndex,
			Err:       errors.New("head chunk file index %d does not exist on disk"),
		}
	}

	if chkStart+MaxChunkLengthFieldSize > mmapFile.byteSlice.Len() {
		return nil, &CorruptionErr{
			Dir:       cdm.dir.Name(),
			FileIndex: sgmIndex,
			Err:       errors.Errorf("head chunk file doesn't include enough bytes to read the chunk size data field - required:%v, available:%v", chkStart+MaxChunkLengthFieldSize, mmapFile.byteSlice.Len()),
		}
	}

	// Encoding.
	chkEnc := mmapFile.byteSlice.Range(chkStart, chkStart+ChunkEncodingSize)[0]

	// Data length.
	// With the minimum chunk length this should never cause us reading
	// over the end of the slice.
	chkDataLenStart := chkStart + ChunkEncodingSize
	c := mmapFile.byteSlice.Range(chkDataLenStart, chkDataLenStart+MaxChunkLengthFieldSize)
	chkDataLen, n := binary.Uvarint(c)
	if n <= 0 {
		return nil, &CorruptionErr{
			Dir:       cdm.dir.Name(),
			FileIndex: sgmIndex,
			Err:       errors.Errorf("reading chunk length failed with %d", n),
		}
	}

	// Verify the chunk data end.
	chkDataEnd := chkDataLenStart + n + int(chkDataLen)
	if chkDataEnd > mmapFile.byteSlice.Len() {
		return nil, &CorruptionErr{
			Dir:       cdm.dir.Name(),
			FileIndex: sgmIndex,
			Err:       errors.Errorf("head chunk file doesn't include enough bytes to read the chunk - required:%v, available:%v", chkDataEnd, mmapFile.byteSlice.Len()),
		}
	}

	// Check the CRC.
	sum := mmapFile.byteSlice.Range(chkDataEnd, chkDataEnd+CRCSize)
	if _, err := chkCRC32.Write(mmapFile.byteSlice.Range(chkStart-(SeriesRefSize+2*MintMaxtSize), chkDataEnd)); err != nil {
		return nil, &CorruptionErr{
			Dir:       cdm.dir.Name(),
			FileIndex: sgmIndex,
			Err:       err,
		}
	}
	if act := chkCRC32.Sum(nil); !bytes.Equal(act, sum) {
		return nil, &CorruptionErr{
			Dir:       cdm.dir.Name(),
			FileIndex: sgmIndex,
			Err:       errors.Errorf("checksum mismatch expected:%x, actual:%x", sum, act),
		}
	}

	// The chunk data itself.
	chkData := mmapFile.byteSlice.Range(chkDataEnd-int(chkDataLen), chkDataEnd)

	// Make a copy of the chunk data to prevent a panic occurring because the returned
	// chunk data slice references an mmap-ed file which could be closed after the
	// function returns but while the chunk is still in use.
	chkDataCopy := make([]byte, len(chkData))
	copy(chkDataCopy, chkData)

	chk, err := cdm.pool.Get(chunkenc.Encoding(chkEnc), chkDataCopy)
	if err != nil {
		return nil, &CorruptionErr{
			Dir:       cdm.dir.Name(),
			FileIndex: sgmIndex,
			Err:       err,
		}
	}
	return chk, nil
}

// IterateAllChunks iterates all mmappedChunkFiles (in order of head chunk file name/number) and all the chunks within it
// and runs the provided function with information about each chunk. It returns on the first error encountered.
// NOTE: This method needs to be called at least once after creating ChunkDiskMapper
// to set the maxt of all the file.
func (cdm *OldChunkDiskMapper) IterateAllChunks(f func(seriesRef HeadSeriesRef, chunkRef ChunkDiskMapperRef, mint, maxt int64, numSamples uint16, encoding chunkenc.Encoding) error) (err error) {
	cdm.writePathMtx.Lock()
	defer cdm.writePathMtx.Unlock()

	defer func() {
		cdm.fileMaxtSet = true
	}()

	chkCRC32 := newCRC32()

	// Iterate files in ascending order.
	segIDs := make([]int, 0, len(cdm.mmappedChunkFiles))
	for seg := range cdm.mmappedChunkFiles {
		segIDs = append(segIDs, seg)
	}
	sort.Ints(segIDs)
	for _, segID := range segIDs {
		mmapFile := cdm.mmappedChunkFiles[segID]
		fileEnd := mmapFile.byteSlice.Len()
		if segID == cdm.curFileSequence {
			fileEnd = int(cdm.curFileSize())
		}
		idx := HeadChunkFileHeaderSize
		for idx < fileEnd {
			if fileEnd-idx < MaxHeadChunkMetaSize {
				// Check for all 0s which marks the end of the file.
				allZeros := true
				for _, b := range mmapFile.byteSlice.Range(idx, fileEnd) {
					if b != byte(0) {
						allZeros = false
						break
					}
				}
				if allZeros {
					// End of segment chunk file content.
					break
				}
				return &CorruptionErr{
					Dir:       cdm.dir.Name(),
					FileIndex: segID,
					Err: errors.Errorf("head chunk file has some unread data, but doesn't include enough bytes to read the chunk header"+
						" - required:%v, available:%v, file:%d", idx+MaxHeadChunkMetaSize, fileEnd, segID),
				}
			}
			chkCRC32.Reset()
			chunkRef := newChunkDiskMapperRef(uint64(segID), uint64(idx))

			startIdx := idx
			seriesRef := HeadSeriesRef(binary.BigEndian.Uint64(mmapFile.byteSlice.Range(idx, idx+SeriesRefSize)))
			idx += SeriesRefSize
			mint := int64(binary.BigEndian.Uint64(mmapFile.byteSlice.Range(idx, idx+MintMaxtSize)))
			idx += MintMaxtSize
			maxt := int64(binary.BigEndian.Uint64(mmapFile.byteSlice.Range(idx, idx+MintMaxtSize)))
			idx += MintMaxtSize

			// We preallocate file to help with m-mapping (especially windows systems).
			// As series ref always starts from 1, we assume it being 0 to be the end of the actual file data.
			// We are not considering possible file corruption that can cause it to be 0.
			// Additionally we are checking mint and maxt just to be sure.
			if seriesRef == 0 && mint == 0 && maxt == 0 {
				break
			}

			// Encoding.
			chkEnc := chunkenc.Encoding(mmapFile.byteSlice.Range(idx, idx+ChunkEncodingSize)[0])
			idx += ChunkEncodingSize
			dataLen, n := binary.Uvarint(mmapFile.byteSlice.Range(idx, idx+MaxChunkLengthFieldSize))
			idx += n

			numSamples := binary.BigEndian.Uint16(mmapFile.byteSlice.Range(idx, idx+2))
			idx += int(dataLen) // Skip the data.

			// In the beginning we only checked for the chunk meta size.
			// Now that we have added the chunk data length, we check for sufficient bytes again.
			if idx+CRCSize > fileEnd {
				return &CorruptionErr{
					Dir:       cdm.dir.Name(),
					FileIndex: segID,
					Err:       errors.Errorf("head chunk file doesn't include enough bytes to read the chunk header - required:%v, available:%v, file:%d", idx+CRCSize, fileEnd, segID),
				}
			}

			// Check CRC.
			sum := mmapFile.byteSlice.Range(idx, idx+CRCSize)
			if _, err := chkCRC32.Write(mmapFile.byteSlice.Range(startIdx, idx)); err != nil {
				return err
			}
			if act := chkCRC32.Sum(nil); !bytes.Equal(act, sum) {
				return &CorruptionErr{
					Dir:       cdm.dir.Name(),
					FileIndex: segID,
					Err:       errors.Errorf("checksum mismatch expected:%x, actual:%x", sum, act),
				}
			}
			idx += CRCSize

			if maxt > mmapFile.maxt {
				mmapFile.maxt = maxt
			}

			if err := f(seriesRef, chunkRef, mint, maxt, numSamples, chkEnc); err != nil {
				if cerr, ok := err.(*CorruptionErr); ok {
					cerr.Dir = cdm.dir.Name()
					cerr.FileIndex = segID
					return cerr
				}
				return err
			}
		}

		if idx > fileEnd {
			// It should be equal to the slice length.
			return &CorruptionErr{
				Dir:       cdm.dir.Name(),
				FileIndex: segID,
				Err:       errors.Errorf("head chunk file doesn't include enough bytes to read the last chunk data - required:%v, available:%v, file:%d", idx, fileEnd, segID),
			}
		}
	}

	return nil
}

// Truncate deletes the head chunk files which are strictly below the mint.
// mint should be in milliseconds.
func (cdm *OldChunkDiskMapper) Truncate(mint int64) error {
	if !cdm.fileMaxtSet {
		return errors.New("maxt of the files are not set")
	}
	cdm.readPathMtx.RLock()

	// Sort the file indices, else if files deletion fails in between,
	// it can lead to unsequential files as the map is not sorted.
	chkFileIndices := make([]int, 0, len(cdm.mmappedChunkFiles))
	for seq := range cdm.mmappedChunkFiles {
		chkFileIndices = append(chkFileIndices, seq)
	}
	sort.Ints(chkFileIndices)

	var removedFiles []int
	for _, seq := range chkFileIndices {
		if seq == cdm.curFileSequence || cdm.mmappedChunkFiles[seq].maxt >= mint {
			break
		}
		if cdm.mmappedChunkFiles[seq].maxt < mint {
			removedFiles = append(removedFiles, seq)
		}
	}
	cdm.readPathMtx.RUnlock()

	errs := tsdb_errors.NewMulti()
	// Cut a new file only if the current file has some chunks.
	if cdm.curFileSize() > HeadChunkFileHeaderSize {
		errs.Add(cdm.CutNewFile())
	}
	errs.Add(cdm.deleteFiles(removedFiles))
	return errs.Err()
}

func (cdm *OldChunkDiskMapper) deleteFiles(removedFiles []int) error {
	cdm.readPathMtx.Lock()
	for _, seq := range removedFiles {
		if err := cdm.closers[seq].Close(); err != nil {
			cdm.readPathMtx.Unlock()
			return err
		}
		delete(cdm.mmappedChunkFiles, seq)
		delete(cdm.closers, seq)
	}
	cdm.readPathMtx.Unlock()

	// We actually delete the files separately to not block the readPathMtx for long.
	for _, seq := range removedFiles {
		if err := os.Remove(segmentFile(cdm.dir.Name(), seq)); err != nil {
			return err
		}
	}

	return nil
}

// DeleteCorrupted deletes all the head chunk files after the one which had the corruption
// (including the corrupt file).
func (cdm *OldChunkDiskMapper) DeleteCorrupted(originalErr error) error {
	err := errors.Cause(originalErr) // So that we can pick up errors even if wrapped.
	cerr, ok := err.(*CorruptionErr)
	if !ok {
		return errors.Wrap(originalErr, "cannot handle error")
	}

	// Delete all the head chunk files following the corrupt head chunk file.
	segs := []int{}
	cdm.readPathMtx.RLock()
	for seg := range cdm.mmappedChunkFiles {
		if seg >= cerr.FileIndex {
			segs = append(segs, seg)
		}
	}
	cdm.readPathMtx.RUnlock()

	return cdm.deleteFiles(segs)
}

// Size returns the size of the chunk files.
func (cdm *OldChunkDiskMapper) Size() (int64, error) {
	return fileutil.DirSize(cdm.dir.Name())
}

func (cdm *OldChunkDiskMapper) curFileSize() int64 {
	return cdm.curFileNumBytes.Load()
}

// Close closes all the open files in ChunkDiskMapper.
// It is not longer safe to access chunks from this struct after calling Close.
func (cdm *OldChunkDiskMapper) Close() error {
	// 'WriteChunk' locks writePathMtx first and then readPathMtx for cutting head chunk file.
	// The lock order should not be reversed here else it can cause deadlocks.
	cdm.writePathMtx.Lock()
	defer cdm.writePathMtx.Unlock()
	cdm.readPathMtx.Lock()
	defer cdm.readPathMtx.Unlock()

	if cdm.closed {
		return nil
	}
	cdm.closed = true

	errs := tsdb_errors.NewMulti(
		closeAllFromMap(cdm.closers),
		cdm.finalizeCurFile(),
		cdm.dir.Close(),
	)
	cdm.mmappedChunkFiles = map[int]*mmappedChunkFile{}
	cdm.closers = map[int]io.Closer{}

	return errs.Err()
}

func (cdm *OldChunkDiskMapper) IsQueueEmpty() bool {
	return true // there is no queue
}