mirror of
https://github.com/TheCommsChannel/TC2-BBS-mesh.git
synced 2024-11-09 22:24:06 -08:00
230 lines
7.6 KiB
Markdown
230 lines
7.6 KiB
Markdown
# TC²-BBS Meshtastic Version
|
|
|
|
[](https://ko-fi.com/B0B1OZ22Z)
|
|
|
|
This is the TC²-BBS system integrated with Meshtastic devices. The system allows for message handling, bulletin boards, mail systems, and a channel directory.
|
|
|
|
### Docker
|
|
|
|
If you're a Docker user, TC²-BBS Meshtastic is available on Docker Hub!
|
|
|
|
[](https://hub.docker.com/r/thealhu/tc2-bbs-mesh)
|
|
|
|
## Setup
|
|
|
|
### Requirements
|
|
|
|
- Python 3.x
|
|
- Meshtastic
|
|
- pypubsub
|
|
|
|
### Installation
|
|
|
|
1. Clone the repository:
|
|
|
|
```sh
|
|
cd ~
|
|
git clone https://github.com/TheCommsChannel/TC2-BBS-mesh.git
|
|
cd TC2-BBS-mesh
|
|
```
|
|
|
|
2. Set up a Python virtual environment:
|
|
|
|
```sh
|
|
python -m venv venv
|
|
```
|
|
|
|
3. Activate the virtual environment:
|
|
|
|
- On Windows:
|
|
|
|
```sh
|
|
venv\Scripts\activate
|
|
```
|
|
|
|
- On macOS and Linux:
|
|
|
|
```sh
|
|
source venv/bin/activate
|
|
```
|
|
|
|
4. Install the required packages:
|
|
|
|
```sh
|
|
pip install -r requirements.txt
|
|
```
|
|
|
|
5. Rename `example_config.ini`:
|
|
|
|
```sh
|
|
mv example_config.ini config.ini
|
|
```
|
|
|
|
6. Set up the configuration in `config.ini`:
|
|
|
|
You'll need to open up the config.ini file in a text editor and make your changes following the instructions below
|
|
|
|
**[interface]**
|
|
If using `type = serial` and you have multiple devices connected, you will need to uncomment the `port =` line and enter the port of your device.
|
|
|
|
Linux Example:
|
|
`port = /dev/ttyUSB0`
|
|
|
|
Windows Example:
|
|
`port = COM3`
|
|
|
|
If using type = tcp you will need to uncomment the hostname = 192.168.x.x line and put in the IP address of your Meshtastic device.
|
|
|
|
**[sync]**
|
|
Enter a list of other BBS nodes you would like to sync messages and bulletins with. Separate each by comma and no spaces as shown in the example below.
|
|
You can find the nodeID in the menu under `Radio Configuration > User` for each node, or use this script for getting nodedb data from a device:
|
|
|
|
[Meshtastic-Python-Examples/print-nodedb.py at main · pdxlocations/Meshtastic-Python-Examples (github.com)](https://github.com/pdxlocations/Meshtastic-Python-Examples/blob/main/print-nodedb.py)
|
|
|
|
Example Config:
|
|
|
|
```ini
|
|
[interface]
|
|
type = serial
|
|
# port = /dev/ttyUSB0
|
|
# hostname = 192.168.x.x
|
|
|
|
[sync]
|
|
bbs_nodes = !f53f4abc,!f3abc123
|
|
```
|
|
|
|
### Running the Server
|
|
|
|
Run the server with:
|
|
|
|
```sh
|
|
python server.py
|
|
```
|
|
|
|
Be sure you've followed the Python virtual environment steps above and activated it before running.
|
|
|
|
## Command line arguments
|
|
```
|
|
$ python server.py --help
|
|
|
|
████████╗ ██████╗██████╗ ██████╗ ██████╗ ███████╗
|
|
╚══██╔══╝██╔════╝╚════██╗ ██╔══██╗██╔══██╗██╔════╝
|
|
██║ ██║ █████╔╝█████╗██████╔╝██████╔╝███████╗
|
|
██║ ██║ ██╔═══╝ ╚════╝██╔══██╗██╔══██╗╚════██║
|
|
██║ ╚██████╗███████╗ ██████╔╝██████╔╝███████║
|
|
╚═╝ ╚═════╝╚══════╝ ╚═════╝ ╚═════╝ ╚══════╝
|
|
Meshtastic Version
|
|
|
|
usage: server.py [-h] [--config CONFIG] [--interface-type {serial,tcp}] [--port PORT] [--host HOST] [--mqtt-topic MQTT_TOPIC]
|
|
|
|
Meshtastic BBS system
|
|
|
|
options:
|
|
-h, --help show this help message and exit
|
|
--config CONFIG, -c CONFIG
|
|
System configuration file
|
|
--interface-type {serial,tcp}, -i {serial,tcp}
|
|
Node interface type
|
|
--port PORT, -p PORT Serial port
|
|
--host HOST TCP host address
|
|
--mqtt-topic MQTT_TOPIC, -t MQTT_TOPIC
|
|
MQTT topic to subscribe
|
|
```
|
|
|
|
|
|
|
|
## Automatically run at boot
|
|
|
|
If you would like to have the script automatically run at boot, follow the steps below:
|
|
|
|
1. **Edit the service file**
|
|
|
|
First, edit the mesh-bbs.service file using your preferred text editor. The 3 following lines in that file are what we need to edit:
|
|
|
|
```sh
|
|
User=pi
|
|
WorkingDirectory=/home/pi/TC2-BBS-mesh
|
|
ExecStart=/home/pi/TC2-BBS-mesh/venv/bin/python3 /home/pi/TC2-BBS-mesh/server.py
|
|
```
|
|
|
|
The file is currently setup for a user named 'pi' and assumes that the TC2-BBS-mesh directory is located in the home directory (which it should be if the earlier directions were followed)
|
|
|
|
We just need to replace the 4 parts that have "pi" in those 3 lines with your username.
|
|
|
|
2. **Configuring systemd**
|
|
|
|
From the TC2-BBS-mesh directory, run the following commands:
|
|
|
|
```sh
|
|
sudo cp mesh-bbs.service /etc/systemd/system/
|
|
```
|
|
|
|
```sh
|
|
sudo systemctl enable mesh-bbs.service
|
|
```
|
|
|
|
```sh
|
|
sudo systemctl start mesh-bbs.service
|
|
```
|
|
|
|
The service should be started now and should start anytime your device is powered on or rebooted. You can check the status of the service by running the following command:
|
|
|
|
```sh
|
|
sudo systemctl status mesh-bbs.service
|
|
```
|
|
|
|
If you need to stop the service, you can run the following:
|
|
|
|
```sh
|
|
sudo systemctl stop mesh-bbs.service
|
|
```
|
|
|
|
If you need to restart the service, you can do so with the following command:
|
|
|
|
```sh
|
|
sudo systemctl restart mesh-bbs.service
|
|
```
|
|
## Radio Configuration
|
|
|
|
Note: There have been reports of issues with some device roles that may allow the BBS to communicate for a short time, but then the BBS will stop responding to requests.
|
|
|
|
The following device roles have been working:
|
|
- **Client**
|
|
- **Router_Client**
|
|
|
|
## Features
|
|
|
|
- **Mail System**: Send and receive mail messages.
|
|
- **Bulletin Boards**: Post and view bulletins on various boards.
|
|
- **Channel Directory**: Add and view channels in the directory.
|
|
- **Statistics**: View statistics about nodes, hardware, and roles.
|
|
- **Wall of Shame**: View devices with low battery levels.
|
|
- **Fortune Teller**: Get a random fortune. Pulls from the fortunes.txt file. Feel free to edit this file remove or add more if you like.
|
|
|
|
## Usage
|
|
|
|
You interact with the BBS by sending direct messages to the node that's connected to the system running the Python script. Sending any message to it will get a response with the main menu.
|
|
Make selections by sending messages based on the letter or number in brackets - Send M for [M]ail Menu for example.
|
|
|
|
A video of it in use is available on our YouTube channel:
|
|
|
|
[](https://www.youtube.com/watch?v=d6LhY4HoimU)
|
|
|
|
## Thanks
|
|
|
|
**Meshtastic:**
|
|
|
|
Big thanks to [Meshtastic](https://github.com/meshtastic) and [pdxlocations](https://github.com/pdxlocations) for the great Python examples:
|
|
|
|
[python/examples at master · meshtastic/python (github.com)](https://github.com/meshtastic/python/tree/master/examples)
|
|
|
|
[pdxlocations/Meshtastic-Python-Examples (github.com)](https://github.com/pdxlocations/Meshtastic-Python-Examples)
|
|
|
|
**JS8Call:**
|
|
|
|
For the JS8Call side of things, big thanks to Jordan Sherer for JS8Call and the [example API Python script](https://bitbucket.org/widefido/js8call/src/js8call/tcp.py)
|
|
|
|
## License
|
|
|
|
GNU General Public License v3.0
|