TC2-BBS-mesh/README.md
2024-06-28 08:56:33 -04:00

5.5 KiB

TC²-BBS Meshtastic Version

ko-fi

This is the TC²-BBS system integrated with Meshtastic devices. The system allows for message handling, bulletin boards, mail systems, and a channel directory.

Docker

If you're a Docker user, TC²-BBS Meshtastic is available on Docker Hub!

Docker HUB

Setup

Requirements

  • Python 3.x
  • Meshtastic
  • pypubsub

Installation

  1. Clone the repository:

    cd ~
    git clone https://github.com/TheCommsChannel/TC2-BBS-mesh.git
    cd TC2-BBS-mesh
    
  2. Set up a Python virtual environment:

    python -m venv venv
    
  3. Activate the virtual environment:

    • On Windows:
    venv\Scripts\activate  
    
    • On macOS and Linux:
    source venv/bin/activate
    
  4. Install the required packages:

    pip install -r requirements.txt
    
  5. Set up the configuration in config.ini:

    [interface]
    If using type = serial and you have multiple devices connected, you will need to uncomment the port = line and enter the port of your device.

    Linux Example:
    port = /dev/ttyUSB0

    Windows Example:
    port = COM3

    If using type = tcp you will need to uncomment the hostname = 192.168.x.x line and put in the IP address of your Meshtastic device.

    [sync]
    Enter a list of other BBS nodes you would like to sync messages and bulletins with. Separate each by comma and no spaces as shown in the example below.
    You can find the nodeID in the menu under Radio Configuration > User for each node, or use this script for getting nodedb data from a device:

    Meshtastic-Python-Examples/print-nodedb.py at main · pdxlocations/Meshtastic-Python-Examples (github.com)

    Example Config:

    [interface]  
    type = serial  
    # port = /dev/ttyUSB0  
    # hostname = 192.168.x.x  
    
    [sync]  
    bbs_nodes = !f53f4abc,!f3abc123  
    

Running the Server

Run the server with:

python server.py```  

Be sure you've followed the Python virtual environment steps above and activated it before running.

Automatically run at boot

If you would like to have the script automatically run at boot, follow the steps below:

  1. Edit the service file

    First, edit the mesh-bbs.service file using your preferred text editor. The 3 following lines in that file are what we need to edit:

    User=pi
    WorkingDirectory=/home/pi/TC2-BBS-mesh
    ExecStart=/home/pi/TC2-BBS-mesh/venv/bin/python3 /home/pi/TC2-BBS-mesh/server.py
    

    The file is currently setup for a user named 'pi' and assumes that the TC2-BBS-mesh directory is located in the home directory (which it should be if the earlier directions were followed)

    We just need to replace the 4 parts that have "pi" in those 3 lines with your username.

  2. Configuring systemd

    From the TC2-BBS-mesh directory, run the following commands:

    sudo cp mesh-bbs.service /etc/systemd/system/
    
    sudo systemctl enable mesh-bbs.service
    
    sudo systemctl start mesh-bbs.service
    

    The service should be started now and should start anytime your device is powered on or rebooted. You can check the status ofk the service by running the following command:

    sudo systemctl status mesh-bbs.service
    

    If you need to stop the service, you can run the following:

    sudo systemctl stop mesh-bbs.service
    

    If you make changes to the watchlist.txt file, you will need to restart the service with the following command:

    sudo systemctl restart mesh-bbs.service
    

Features

  • Mail System: Send and receive mail messages.
  • Bulletin Boards: Post and view bulletins on various boards.
  • Channel Directory: Add and view channels in the directory.
  • Statistics: View statistics about nodes, hardware, and roles.
  • Wall of Shame: View devices with low battery levels.
  • Fortune Teller: Get a random fortune. Pulls from the fortunes.txt file. Feel free to edit this file remove or add more if you like.

Usage

You interact with the BBS by sending direct messages to the node that's connected to the system running the Python script. Sending any message to it will get a response with the main menu.
Make selections by sending messages based on the letter or number in brackets - Send M for [M]ail Menu for example.

A video of it in use is available on our YouTube channel:

TC²-BBS-Mesh

Thanks

Big thanks to Meshtastic and pdxlocations for the great Python examples:

python/examples at master · meshtastic/python (github.com)

pdxlocations/Meshtastic-Python-Examples (github.com)

License

GNU General Public License v3.0