| CLIENT | App connected or stand alone messaging device. | General use for individuals needing to communicate over the Meshtastic network with support for client applications. |
| CLIENT_MUTE | Device that does not forward packets from other devices. | Situations where a device needs to participate in the network without assisting in packet routing, reducing network load. |
| CLIENT_HIDDEN | Device that only broadcasts as needed for stealth or power savings. | Use in stealth/hidden deployments or to reduce airtime/power consumption while still participating in the network. |
| TRACKER | Broadcasts GPS position packets as priority. | Tracking the location of individuals or assets, especially in scenarios where timely and efficient location updates are critical. |
| LOST_AND_FOUND | Broadcasts location as message to default channel regularly for to assist with device recovery. | Used for recovery efforts of a lost device. |
| SENSOR | Broadcasts telemetry packets as priority. | Deploying in scenarios where gathering environmental or other sensor data is crucial, with efficient power usage and frequent updates. |
| TAK | Optimized for ATAK system communication, reduces routine broadcasts. | Integration with ATAK systems (via the Mesthastic ATAK Plugin) for communication in tactical or coordinated operations. |
| TAK_TRACKER | Enables automatic TAK PLI broadcasts and reduces routine broadcasts. | Standalone PLI integration with ATAK systems for communication in tactical or coordinated operations. |
| REPEATER | Infrastructure node for extending network coverage by relaying messages with minimal overhead. Not visible in Nodes list. | Best positioned in strategic locations to maximize the network's overall coverage. Device is not shown in topology. |
| ROUTER | Infrastructure node for extending network coverage by relaying messages. Visible in Nodes list. | Best positioned in strategic locations to maximize the network's overall coverage. Device is shown in topology. |
| ROUTER_CLIENT | Combination of both ROUTER and CLIENT. Not for mobile devices. | Devices in a strategic position for priority routing that need to also serve as a standard CLIENT. |
1. Caution: The Router role enables [Power Saving](/docs/configuration/radio/power/#power-saving) by default. Consider ROUTER_CLIENT if BLE/WiFi/Serial are still needed.
| `ALL` | ALL (Default) - This setting will rebroadcast ALL messages from its primary mesh as well as other meshes with the same modem settings, including when encryption settings differ. |
| `ALL_SKIP_DECODING` | ALL_SKIP_DECODING - Same as behavior as ALL, but skips packet decoding and simply rebroadcasts them. **Only available with Repeater role.** |
| `LOCAL_ONLY` | LOCAL_ONLY - Ignores observed messages from foreign meshes that are open or those which it cannot decrypt. Only rebroadcasts message on the nodes local primary / secondary channels. |
| `KNOWN_ONLY` | KNOWN_ONLY - Ignores observed messages from foreign meshes like LOCAL_ONLY, but takes it a step further by also ignoring messages from nodenums not in the node's known list (NodeDB). |
This is the number of seconds between NodeInfo message (containing i.a. long and short name) broadcasts from the device. The device will still respond ad-hoc to NodeInfo messages when a response is wanted. When the device hears any packet from a node it doesn't know yet, it will send its NodeInfo and ask for a response automatically.
Enabling Managed mode will restrict access to all radio configurations via client applications. Radio configurations will only be accessible through the Admin channel. To avoid being locked out, make sure the Admin channel is working properly before enabling it.
Because the device will reboot after each command is sent via CLI, it is recommended when setting multiple values in a config section that commands be chained together as one.
