mirror of
https://github.com/meshtastic/meshtastic.git
synced 2025-03-05 21:00:08 -08:00
Merge branch 'master' into remove-gui-flasher
This commit is contained in:
commit
1ca8214267
|
@ -9,4 +9,11 @@ sidebar_position: 2
|
|||
|
||||
The nRF52 based devices have the easiest firmware upgrade process. No driver or software install is required on any platform.
|
||||
|
||||
1. The [Drag & Drop](/docs/getting-started/flashing-firmware/nrf52/drag-n-drop) firmware installation method is considered the "manual process" and recommended as the easiest solution.
|
||||
### Drag & Drop
|
||||
nRF52 devices use the [Drag & Drop](/docs/getting-started/flashing-firmware/nrf52/drag-n-drop) installation method to install firmware releases.
|
||||
|
||||
### Factory Erase
|
||||
You may wish to perform a [Factory Erase](/docs/getting-started/flashing-firmware/nrf52/nrf52-erase) prior to installing firmware to clear data that may change format and location between releases.
|
||||
|
||||
### Convert RAK4631-R to RAK4631
|
||||
If your device did not come with the Arduino bootloader you will need to [perform the conversion](/docs/getting-started/flashing-firmware/nrf52/convert-rak4631r).
|
|
@ -59,7 +59,7 @@ Some cables only provide _charging_, verify that your cable is also capable of _
|
|||
|
||||
:::caution
|
||||
|
||||
With the latest versions of MacOS, USB Serial drivers are built-in. Do _NOT_ download the USB device drivers unless required. You may [test for installed serial drivers](/docs/getting-started/serial-drivers/test-serial-driver-installation) before continuing.
|
||||
nRF52 devices typically do not require serial drivers. They use the UF2 bootloader which makes the devices appear as flash drives. Do _NOT_ download the USB device drivers unless required to install UF2 support.
|
||||
|
||||
:::
|
||||
|
||||
|
|
|
@ -11,6 +11,12 @@ import Link from "@docusaurus/Link";
|
|||
|
||||
## Install nRF52 USB to Serial Drivers
|
||||
|
||||
:::caution
|
||||
|
||||
nRF52 devices typically do not require serial drivers. They use the UF2 bootloader which makes the devices appear as flash drives. Do _NOT_ download the USB device drivers unless required to install UF2 support.
|
||||
|
||||
:::
|
||||
|
||||
<Tabs
|
||||
groupId="operating-system"
|
||||
defaultValue="windows"
|
||||
|
@ -22,17 +28,16 @@ values={[
|
|||
|
||||
<TabItem value="linux">
|
||||
|
||||
- [CH9102 Driver - Linux Download](http://www.wch-ic.com/downloads/CH341SER_LINUX_ZIP.html)
|
||||
- [CH34x Driver - Linux Download](http://www.wch-ic.com/downloads/CH341SER_LINUX_ZIP.html)
|
||||
|
||||
</TabItem>
|
||||
|
||||
<TabItem value="macos">
|
||||
|
||||
- [CH9102 Driver - macOS Download](https://github.com/WCHSoftGroup/ch34xser_macos)
|
||||
|
||||
:::caution
|
||||
:::info
|
||||
|
||||
With the latest versions of MacOS, the USB Serial driver is built-in. Do _NOT_ download the USB device drivers unless required. If you downloaded/installed any already, please remove them.
|
||||
With the latest versions of MacOS, the USB Serial driver is built-in. If you downloaded/installed any already, please remove them.
|
||||
|
||||
:::
|
||||
|
||||
|
@ -47,11 +52,18 @@ Uninstall the kernel extension:
|
|||
3. `sudo rm -rf /Library/Extensions/usbserial.kext`
|
||||
4. Reboot
|
||||
|
||||
|
||||
### Install the CH34x Driver
|
||||
|
||||
- [CH34x Driver- macOS Download](https://github.com/WCHSoftGroup/ch34xser_macos)
|
||||
|
||||
|
||||
|
||||
</TabItem>
|
||||
|
||||
<TabItem value="windows">
|
||||
|
||||
- [CH9102 Driver - Windows Download](http://www.wch-ic.com/downloads/CH341SER_EXE.html)
|
||||
- [CH34x Driver - Windows Download](http://www.wch-ic.com/downloads/CH341SER_EXE.html)
|
||||
|
||||
</TabItem>
|
||||
|
||||
|
|
Loading…
Reference in a new issue