Merge pull request #417 from sigmahour/master

updates to wifi, user, and ham docs

docs/faq/ham.mdx

@@ -0,0 +1,29 @@
+---
+id: ham
+title: FAQs - HAM
+sidebar_label: Amateur Radio (HAM)
+---
+
+## Overview
+
+Meshtastic can be used by both unlicensed people and licensed HAM operators. 
+
+### What is the benefit of using a HAM license with Meshtastic?
+
+If you use your HAM radio license with Meshtastic, consider both the privileges and restrictions:
+
+#### Privileges
+- Increased Transmit Power
+	- Up to 1500W transmit power! [FCC Part 97.313](https://www.ecfr.gov/current/title-47/chapter-I/subchapter-D/part-97/subpart-D/section-97.313)
+- Higher Gain Antennas
+
+#### Restrictions
+- Plain-Text Only
+	- On amateur radio bands, encryption is illegal. [FCC Part 97.113.C](https://www.ecfr.gov/current/title-47/chapter-I/subchapter-D/part-97/subpart-B/section-97.113)
+- Lack of Privacy
+	- As a HAM operator, it is a requirement that you identify yourself by your call sign periodically when transmitting. Your call sign will be publicly transmitted at least once every 10 minutes at minimum. [FCC Part 97.119.A](https://www.ecfr.gov/current/title-47/chapter-I/subchapter-D/part-97/subpart-B/section-97.119)
+
+
+### How do I set my HAM call sign?
+
+Please see instructions for [Enabling HAM License from the Python CLI](/docs/software/python/python-uses#ham-radio-support)

docs/settings/config/index.mdx

@@ -16,5 +16,5 @@ Default settings values are prefered whenever possible as they consume no bandwi
 | [LoRa](lora) | The LoRa config options are: Region, Modem Preset, Max Hops, Transmit Power, Bandwidth, Spread Factor, Coding Rate, Frequency Offset, Transmit Disabled and Ignore Incoming Array. |
 | [Position](position) | Positon config options are: GPS Enabled, GPS Update Interval, GPS Attempt Time, Fixed Postion, Smart Broadcast, Broadcast Interval and Position Packet Flags.  |
 | [Power](power) | Power config options are: Charge Current, Power Saving, Shutdown after losing power, ADC Multiplier Override Wait Bluetooth Interval, Mesh Super Deep Sleep Timeout, Super Deep Sleep Interval, Light Sleep Interval and Minimum Wake Interval. |
-| [User](user) | The user config options are: Short Name, Long Name, Licensed Operator, Transmit Power at Antenna Connector, Antenna Gain and Antenna Azimuth. |
+| [User](user) | The user config options are: Long Name, Short Name, and Is Licensed |
 | [Network](network) | Network config options are: Wifi Enabled, WiFi SSID, Wifi PSK, WiFi Mode and NTP Server. |

docs/settings/config/user.mdx

@@ -7,27 +7,38 @@ sidebar_label: User
 import Tabs from '@theme/Tabs';
 import TabItem from '@theme/TabItem';
 
-The user config options are: Short Name, Long Name, Licensed Operator, Transmit Power at Antenna Connector, Antenna Gain and Antenna Azimuth.  User config uses an admin message sending a `User` protobuf.
+The user config options are: Long Name, Short Name, and Is Licensed. User config uses an admin message sending a `User` protobuf.
 
 ## User Config Values
 
-### Short Name
-
 ### Long Name
 
-### Licensed Operator
+A personalised name for your device.
 
-### Transmit Power at Antenna Connector
+Auto-generated by default.
 
-### Antenna Gain
+If you are a licensed HAM operator and have enabled `IsLicensed`, this should be set to your HAM operator call sign.
 
-### Antenna Azimuth
+### Short Name
 
-## Device Config Client Availability
+A personalized short identifier for your device.
+
+Auto-generated by default.
+
+### Is Licensed (HAM)
+
+If you are a licensed HAM operator and have considered the [privileges and restrictions](/docs/faq/ham#what-is-the-benefit-of-using-my-ham-license-with-meshtastic) of using Meshtastic with a HAM license, enable this flag.
+
+Disabled by default.
+
+By enabling `IsLicensed`, you should also review the following related configurations:
+
+- **User:** `LongName` (Should be your Call Sign)
+- **Channel:** `PSK` (Should be Empty, removing encryption)
 
 <Tabs
 groupId="settings"
-defaultValue="android"
+defaultValue="cli"
 values={[
 {label: 'Android', value: 'android'},
 {label: 'Apple', value: 'apple'},
@@ -35,37 +46,50 @@ values={[
 {label: 'Flasher', value: 'flasher'},
 {label: 'Web', value: 'web'},
 ]}>
+
 <TabItem value="android">
 
 :::info
-Long Name can be edited on Android.
+`LongName` can be edited on Android.
 :::
 
 </TabItem>
+
 <TabItem value="apple">
 
 :::info
-Short Name and Long Name user config options are available on iOS, iPadOS and macOS at Settings > Radio Configuration > User.
+`ShortName` and `LongName` User config options are available on iOS, iPadOS and macOS at `Settings > Radio Configuration > User`.
 :::
 
 </TabItem>
+
 <TabItem value="cli">
 
-All display config options are available in the python CLI. Example commands are below:
+All User config options are available in the python CLI. Example commands are below:
+
+|    Setting    | Acceptable Values | Default |
+| :-----------: | :---------------: | :-----: |
+| LongName      |      string       | auto-generated |
+| ShortName     |      string       | auto-generated |
+| IsLicensed    |       bool        | `false`        |
+
+Please see instructions for [Enabling HAM License](/docs/software/python/python-uses#ham-radio-support)
 
 </TabItem>
+
 <TabItem value="flasher">
 
 :::info
-No user config options are available in the Flasher.
+No User config options are available in the Flasher.
 :::
 
-  </TabItem>
+</TabItem>
-  <TabItem value="web">
+
+<TabItem value="web">
 
 :::info
-All user config options are available in the Web UI.
+All User config options are available in the Web UI.
 :::
-    
+
-  </TabItem>
+</TabItem>
 </Tabs>

docs/settings/config/wifi.mdx

@@ -22,53 +22,45 @@ You can [force the device to boot into SoftAP mode](#software-access-point) by r
 
 ### NTP Server
 
-Type: **string** (Max Length: 33)
+The NTP server used if IP networking is available.
 
-Default: `0.pool.ntp.org`
+Set to `0.pool.ntp.org` by default. (Max Length: 33)
-
-The NTP server used if WiFi is conneced. 
 
 ### Wifi Enabled
 
-Type: **bool**
+Enables or Disables WiFi.
 
-Default: `false` (Disabled)
+Set to `false` (Disabled) by default.
-
-Enables and Disables WiFi.
 
 ### WiFi SSID
 
-Type: **string** (Case Sensitive, Max Length: 33)
-
-Default: `""` (Empty)
-
 In [SoftAP](#software-access-point) mode, this is the SSID broadcast to access your device's WiFi. 
 
 In [Client](#wifi-client) mode, this is your WiFi Networks SSID.
 
+Empty `""` by default. (Case Sensitive, Max Length: 33)
+
 ### WiFi PSK
 
-Type: **string** (Case Sensitive, Max Length: 64)
-
-Default: `""` (Empty)
-
 In [SoftAP](#software-access-point) mode, this is the password to access your device's WiFi.
 
 In [Client](#wifi-client) mode, this is your WiFi Networks password.
 
+Empty `""` by default. (Case Sensitive, Max Length: 64)
+
 ### WiFi Mode
 
-Type: **enum**
+Used to set either [SoftAP](#software-access-point) or [Client](#wifi-client) WiFi modes.
 
-Default: `Client`
+Set to `CLIENT` by default.
 
 #### Acceptable values
 
 |   Value   |     Description              |
 | :-------: | :--------------------------: |
 |  `CLIENT`   | Client |
-| `ACCESS_POINT` | [Software Access Point](#software-access-point) |
+| `ACCESS_POINT` | (SoftAP) [Software Access Point](#software-access-point) |
-| `ACCESS_POINT_HIDDEN` | Software Access Point (Hidden) |
+| `ACCESS_POINT_HIDDEN` | (SoftAP) Software Access Point (Hidden) |
 
 :::tip
 The first time your device restarts after enabling the WiFi access point, it will take an additional 20-30 seconds to boot. This is to generate self-signed SSL keys. The keys will be saved for future reuse.
@@ -205,7 +197,7 @@ You should then be able to connect to the node using either the displayed IP add
 
 ### WiFi Client
 
-With `network.wifi_ssid` & `network.wifi_psk` populated, the device will know to connect to your network. Make sure you are in range of your WiFi. If you have a single device on your local network it's easy to connect to your device `http://meshtastic.local`. If you have multiple devices you will need to connect using their respective IP addresses.
+With `network.wifi_ssid` & `network.wifi_psk` populated, the device will know to connect to your network. Make sure you are in range of your WiFi. If you have a single Meshtastic device on your local network it's easy to connect to your device with DNS `http://meshtastic.local`. If you have multiple Meshtastic devices you will need to connect using their respective IP addresses.
 
 If you have a screen attached to your device, the final page will display something similar to the following:
 

docs/software/python/uses.mdx

@@ -95,6 +95,15 @@ Setting Ham ID to KI1345 and turning off encryption
 Writing modified channels to device
 ```
 
+Toggling `set-ham` changes your device settings in the following ways.
+
+|         Setting          | `set-ham` Default |              Normal Default               |
+| :----------------------: | :---------------: | :---------------------------------------: |
+| `IsLicensed`  |   `true`   | See [User Config - IsLicensed](/docs/settings/config/user#is-licensed-ham) |
+| `LongName`    |    _Your CallSign_    | See [User Config - LongName](/docs/settings/config/user#long-name)         |
+| `ShortName`   |    _Abrv CallSign_    | See [User Config - ShortName](/docs/settings/config/user#short-name)       |
+| `PSK`         |    `""`    | See [Channel Settings - PSK](#changing-the-preshared-key)            |
+
 ## Changing the preshared key:
 
 You can set the channel preshared key to a particular AES128 or AES256 sequence.