mirror of
https://github.com/meshtastic/meshtastic.git
synced 2024-09-20 16:17:33 -07:00
add moduleconfig
This commit is contained in:
parent
fccdfd6199
commit
ca47fcf67e
|
@ -9,9 +9,9 @@ Modules are included in the firmware and allow users to extend the functionality
|
|||
|
||||
| Name | Description |
|
||||
|:----:|:-----------:|
|
||||
| [Canned Message](docs/settings/config/canned-message) | Set a number of predefined messages to send out directly from the device with the use of an input device like a rotary encoder. |
|
||||
| [External Notification](docs/settings/config/external-notification) | Incoming messages are able to alert you using circuits you attach to the device (LEDs, Buzzers, etc) |
|
||||
| [MQTT](docs/settings/config/mqtt) | Forward packets along to an MQTT server. This allows users on the local mesh to communicate with users on another mesh over the internet. |
|
||||
| [Range Test](docs/settings/config/range-test) | Send messages with GPS location at an interval to test the distance your devices can communicate. Requires (at least) one device set up as a sender and one as a receiver. The receiver(s) will log all incoming messages to a CSV. |
|
||||
| [Serial Module](docs/settings/config/serial) | Send messages across the mesh by sending strings over a serial port. |
|
||||
| [Telemetry](docs/settings/config/telemetry) | Attach sensors to the device and transmit readings on a regular interval to the mesh. |
|
||||
| [Canned Message](docs/settings/moduleconfig/canned-message) | Set a number of predefined messages to send out directly from the device with the use of an input device like a rotary encoder. |
|
||||
| [External Notification](docs/settings/moduleconfig/external-notification) | Incoming messages are able to alert you using circuits you attach to the device (LEDs, Buzzers, etc) |
|
||||
| [MQTT](docs/settings/moduleconfig/mqtt) | Forward packets along to an MQTT server. This allows users on the local mesh to communicate with users on another mesh over the internet. |
|
||||
| [Range Test](docs/settings/moduleconfig/range-test) | Send messages with GPS location at an interval to test the distance your devices can communicate. Requires (at least) one device set up as a sender and one as a receiver. The receiver(s) will log all incoming messages to a CSV. |
|
||||
| [Serial Module](docs/settings/moduleconfig/serial) | Send messages across the mesh by sending strings over a serial port. |
|
||||
| [Telemetry](docs/settings/moduleconfig/telemetry) | Attach sensors to the device and transmit readings on a regular interval to the mesh. |
|
||||
|
|
Loading…
Reference in a new issue