list formatting

This commit is contained in:
Ben Meadors 2022-05-15 13:19:00 -05:00 committed by GitHub
parent 01c85da13b
commit e796126008
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23

View file

@ -43,9 +43,13 @@ There are multiple ways to connect the pins of the adapter to the target device:
Disconnect your USB to Serial Adapter from the computer before starting this process.
1) Connect the RX pin of the adapter to the TX pin of the device
2) Connect the TX pin of the adapter to the RX pin of the device
3) Connect a GND pin of the adapter to the GND pin of the device
4) Connect either the 5V pin of the adapter to the 5V pin of the device (illustrated) or the 3.3V pin of the adapter to the 3.3V pin of device.
5) Bridge GPIO 0 to GND on the device with a jumper. (This places the device into flash mode when the device is powered up)
Example wiring featuring a T-Beam