mudhorn/meshtastic
1
0
Fork 0
mirror of https://github.com/meshtastic/meshtastic.git synced 2024-11-14 01:24:14 -08:00
Code Issues Actions Packages Projects Releases Wiki Activity
meshtastic/website/docs/getting-started/flashing-nrf52.md
Sacha Weatherstone 9dc234b9ed Remove espHome instuctions, fix ordered list.
2021-12-07 22:41:29 +11:00

3.9 KiB
Raw Blame History

id title sidebar_label
flashing-nrf52 Flashing nRF52 devices firmware nRF52 devices

import Tabs from '@theme/Tabs'; import TabItem from '@theme/TabItem';

Pre-requisits

:::tip Please ensure that you use a data USB-C cable, as many USB-C cables provide power only and not the data lines. :::

T-Echo

:::tip The usb-C to usb-A cable from LILYGO is NOT a "data cable", and can only be used for charging. :::

Windows:

You may need to install the USB device drivers if your device does not show up when connected.

Mac OS

Last Verified T-Echo nRF52840 on: Mac OS Monterey v12.0.1 (Intel chipset)

:::tip You can use the latest Apple USB-C Charge cables. The cable that is provided with the iPad Pro works. Older Laptop usb-C Power cables will NOT work, as they are missing the data lines. :::

:::caution With the latest versions of MacOS, the USB Serial driver is built-in. Do NOT download any USB device drivers - this will actually prevent you from connecting to your T-Echo from your Mac. If you downloaded/installed any already, please Remove them. :::

Removing the CH34x (CH340/CH341) USB Drivers
If you have already downloaded/installed the MacOS WCH-IC CH340 ("CH341SER_MAC") drivers via the `CH34x_Install_V1.5.pkg`, you will have to Uninstall the kernel extension:

1. Unplug your T-Echo
2. Open the Terminal and run:
3. sudo -rf /Library/Extensions/usbserial.kext`
4. Reboot

Verify successful connections with:

  • Plug in your T-Echo
  • Open the Terminal
  • ls -l /dev/tty.usbmodem*

If the device file exists, you will also notice a "TECHOBOOT" volume in the Finder, or in the Terminal after double-clicking the Reset Button (see below)

  • ls /Volumes/TECHOBOOT

WisBlock RAK4631

Please ensure that you have updated the bootloader to the latest version using the information on the RAK Documentation Center website.

Download Latest Firmware

Prebuilt binaries for the supported radios are available in our releases. Your initial installation has to happen over USB from your Mac, Windows or Linux PC. Once our software is installed, all future software updates happen over bluetooth from your phone.

Current Firmware List of Firmware Versions

Install/Update Firmware

:::caution Be careful to install the correct load for your board. While it is unlikely that you will cause damage to your device, the wrong firmware will cause it to not work. :::

  • Connect your device to your computer with a USB cable. If you computer complains about needing to format a new drive, cancel the format command.
  • Double click the Reset button on your device, this will put it into boot loader mode.

<img alt="LILYGO T-Echo" src="/img/hardware/t-echo-lilygo.jpg" style={{zoom:'25%'}} />

  • A new drive will then be mounted on your computer. Open this drive and you should see three files: CURRENT.UF2, INDEX.HTM, and INFO_UF2.TXT
  • Copy the appropriate firmware-xxxxx-1.2.x.uf2 file from the firmware zip file onto the new drive.

:::note You are going to copy/drop "as is" 'firmware-xxxxx-1.2.x.uf2' (NOT over the "CURRENT.UF2" file) in the volume, and the device reboot will copy it/load it correctly. :::

  • Once the file has finished copying over, the device will reboot, loading the new firmware as it does.