3.3 KiB
| id | title | sidebar_label |
|---|---|---|
| wifi | WiFi Settings | WiFi |
Overview
WiFi support can be configured as either a WiFi Client or a Software Access Point (SoftAP). The WiFi client will connect to your existing WiFi network, as opposed to the SoftAP which will broadcast a new SSID and Password. See below for more details.
:::note The device can be either a WiFi client or a software access point. It cannot operate as both at the same time. :::
Settings
| Setting | Acceptable Values | Default |
|---|---|---|
| wifi_ap_mode | true, false |
false |
| wifi_password | string | "" |
| wifi_ssid | string | "" |
:::note
If your wifi_ssid or wifi_password contain spaces, be sure to put quotation marks around the whole thing:
meshtastic --set wifi_ssid "my wifi ssid" --set wifi_password "my wifi password"
:::
:::note
wifi_ssid & wifi_password are both case sensitive values.
:::
wifi_ap_mode
A boolean value that toggles the Software Access Point
wifi_password
In SoftAP mode, this is the password to access your device's WiFi. In Client mode, this is your WiFi Networks password. This string is case sensitive.
wifi_ssid
In SoftAP mode, this is the SSID broadcast to access your device's WiFi. In Client mode, this is your WiFi Networks SSID. This string is case sensitive.
Details
Software Access Point
With the SoftAP enabled, a DNS server will run on the device. The DNS server will respond to all DNS requests with the IP address of your device. This will simplify device discovery because you will not have to remember the device's IP – any unencrypted HTTP request will direct you to the right location.
Force SoftAP
You can also enable the SoftAP by following these directions:
- Hold down the user button
- Press and release the reset button
- Count to two
- Let go of the user button
This will reboot the device with the SSID set to meshtasticAdmin and the password set to 12345678. Using the Force SoftAP method, once you reboot, the SoftAP will be turned off.
WiFi Client
With wifi_ssid & wifi_password populated, the device will now to connect to your network. Make sure you are in range of your WiFi. If you have a single device on your local network it's easy to connect to your device http://meshtastic.local. If you have multiple devices you will need to connect using thier respective IP addresses.
To disable WiFi completely, set wifi_ap_mode to false, and both wifi_ssid & wifi_password to an empty string "".
CLI Examples
meshtastic --set wifi_ap_mode false --set wifi_ssid mywifissid --set wifi_password mywifipassword
In the above example, the device will join a network with the SSID mywifissid and the password mywifipassword.
meshtastic --set wifi_ap_mode false --set wifi_ssid "" --set wifi_password ""
In the above example, the device will disable WiFi.
meshtastic --set wifi_ap_mode true --set wifi_ssid mywifissid --set wifi_password mywifipassword
In the above example, the device will broadcast a network with the SSID mywifissid and the password mywifipassword.