mirror of
https://github.com/meshtastic/meshtastic.git
synced 2024-11-10 23:54:17 -08:00
36 lines
2.3 KiB
Markdown
36 lines
2.3 KiB
Markdown
---
|
|
id: device-power
|
|
title: Power Management State Machine
|
|
sidebar_label: Power Management
|
|
---
|
|
|
|
Long battery life is one of the main goals of this project. Based on intial measurements, the current code should run for about three days between charging (assuming using a t-beam with a 3500mAh 18650 battery). This will hopefully be increased to around eight days in the future.
|
|
|
|
## States
|
|
|
|
From lower to higher power consumption.
|
|
|
|
- Super-deep-sleep (SDS) - everything is off, CPU, radio, bluetooth, GPS. Only wakes due to timer or button press. We enter this mode only after no radio comms for a few hours, used to put the device into what is effectively "off" mode.
|
|
* onEntry: setBluetoothOn(false), call doDeepSleep
|
|
* onExit: (standard bootup code, starts in DARK)
|
|
- deep-sleep (DS) - CPU is off, radio is on, bluetooth and GPS is off. Note: This mode is never used currently, because it only saves 1.5mA vs light-sleep - (Not currently used).
|
|
- light-sleep (LS) - CPU is suspended (RAM stays alive), radio is on, bluetooth is off, GPS is off. Note: currently GPS is not turned off during light sleep, but there is a TODO item to fix this.
|
|
* NOTE: On NRF52 platforms (because CPU current draw is so low), light-sleep state is never used.
|
|
* onEntry: setBluetoothOn(false), setGPSPower(false), doLightSleep()
|
|
* onIdle: (if we wake because our led blink timer has expired) blink the led then go back to sleep until we sleep for ls_secs
|
|
* onExit: setGPSPower(true), start trying to get gps lock: gps.startLock(), once lock arrives service.sendPosition(BROADCAST)
|
|
- No bluetooth (NB) - CPU is running, radio is on, GPS is on but bluetooth is off, screen is off.
|
|
* onEntry: setBluetoothOn(false)
|
|
* onExit:
|
|
- running dark (DARK) - Everything is on except screen.
|
|
* onEntry: setBluetoothOn(true)
|
|
* onExit:
|
|
- serial API usage (SERIAL) - Screen is on, device doesn't sleep, bluetooth off.
|
|
* onEntry: setBluetooth off, screen on
|
|
* onExit:
|
|
- full on (ON) - Everything is on, can eventually timeout and lower to a lower power state.
|
|
* onEntry: setBluetoothOn(true), screen.setOn(true)
|
|
* onExit: screen->setOn(false)
|
|
- has power (POWER) - Screen is on, device doesn't sleep, bluetooth on, will stay in this state as long as we have power.
|
|
* onEntry: setBluetooth off, screen on
|
|
* onExit: |