mirror of
https://github.com/meshtastic/meshtastic.git
synced 2024-12-27 22:49:45 -08:00
91 lines
3.6 KiB
Markdown
91 lines
3.6 KiB
Markdown
---
|
||
id: windows
|
||
title: Flashing Firmware – Windows
|
||
sidebar_label: Windows
|
||
---
|
||
:::note
|
||
To check if you have a data cable that will work, plug in your device and navigate to `Device Manager > Ports` and ensure the device is shown. You should see something like `CP210X USB to UART Bridge Controller`.
|
||
|
||
If your device is showing up under `Device Manager > Ports > Other Devices` you need to install the driver from Silicon Labs for the [CP210X USB to UART bridge](https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers)
|
||
:::
|
||
## Download Firmware
|
||
|
||
<!--- TODO add buttons to links --->
|
||
Download the [latest](https://github.com/meshtastic/meshtastic-device/releases/latest) firmware release. Unzip the file and locate the correct device and region within the list of prebuilt binaries.
|
||
|
||
## Command Line Instructions
|
||
|
||
1. Download and install [Python](https://www.python.org/). Make sure to click `Add Python X.Y to PATH`.
|
||
2. Download and install [Gitbash](https://gitforwindows.org/) (or other appropriate shell) and run all subsequent commands from that shell.
|
||
3. Confirm installation of `python` & `pip` with the following commands.
|
||
```bash
|
||
py --version
|
||
```
|
||
```bash
|
||
pip --version
|
||
```
|
||
<!--- Check on `gitbash` requirements --->
|
||
4. Install `esptool`
|
||
```bash
|
||
pip install --upgrade esptool
|
||
```
|
||
5. Connect your radio to your USB port.
|
||
6. Confirm that your device is talking to your Mac by running the following command in Terminal.
|
||
```bash title="Command"
|
||
esptool.py chip_id
|
||
```
|
||
```bash title="Expected Output"
|
||
# You should see a result similar to this:
|
||
mydir$ esptool.py chip_id
|
||
esptool.py v2.6
|
||
Found 2 serial ports
|
||
Serial port /dev/ttyUSB0
|
||
Connecting....
|
||
Detecting chip type... ESP32
|
||
Chip is ESP32D0WDQ6 (revision 1)
|
||
Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None
|
||
MAC: 24:6f:28:b5:36:71
|
||
Uploading stub...
|
||
Running stub...
|
||
Stub running...
|
||
Warning: ESP32 has no Chip ID. Reading MAC instead.
|
||
MAC: 24:6f:28:b5:36:71
|
||
Hard resetting via RTS pin...
|
||
```
|
||
7. `cd` into the directory where you unzipped the latest release. For example:
|
||
```bash title="Example"
|
||
cd /Downloads/firmware/
|
||
```
|
||
8. Install the correct firmware for your board with
|
||
:::caution
|
||
Be very careful to install the correct load for your board. In particular the popular 'T-BEAM' radio from TTGO is not called 'TTGO-Lora' (that is a different board). So don't install the 'TTGO-Lora' build on a TBEAM, it won't work correctly.
|
||
:::
|
||
```bash title="Command"
|
||
./device-install.sh -f firmware-BOARD-VERSION.bin
|
||
```
|
||
```bash title="Example"
|
||
./device-install.sh -f firmware-heltec-EU865-1.2.0.bin
|
||
```
|
||
9. To update a the firmware on an existing Meshtastic device, run
|
||
```bash title="Command"
|
||
./device-update.sh -f firmware-BOARD-VERSION.bin
|
||
```
|
||
```bash title="Example"
|
||
./device-update.sh -f firmware-heltec-EU865-1.2.0.bin
|
||
```
|
||
|
||
## Graphical User Interface Instructions
|
||
|
||
:::note
|
||
ESPHome Flasher also provides instructions to build from source or install via `pip` on their README.
|
||
:::
|
||
|
||
1. Download [ESPHome Flasher](https://github.com/esphome/esphome-flasher)
|
||
2. Connect your radio to your USB port.
|
||
3. Open ESPHome Flasher. There should be no installation required.
|
||
4. If your board is not showing under `Serial Port` then you may need to install the drivers for the [CP210X USB to UART bridge](https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers).
|
||
5. In ESPHome Flasher, refresh the serial ports and select the port to which your board is connected.
|
||
6. Browse to the previously downloaded firmware and select the correct firmware based on the board type.
|
||
7. Select Flash ESP.
|
||
8. Once complete, “Done! Flashing is complete!” will be shown.
|