11 KiB
| id | title | sidebar_label |
|---|---|---|
| input-broker-module | Input Broker | Input Broker |
import Tabs from '@theme/Tabs'; import TabItem from '@theme/TabItem';
:::warning GPIO access is fundamentally dangerous because invalid options can physically damage or destroy your hardware. Ensure that you fully understand the schematic for your particular device before trying this as we do not offer a warranty. Use at your own risk. :::
:::note This module requires attaching a peripheral accessory to your device. It will not work without one. :::
Overview
Meshtastic supports hardwired rotary encoders as input devices.
Currently, one rotary encoder (rotary1) is defined, but later more rotary encoders
can be added (if needed) the same way.
:::tip Once module settings are changed, a reset is required for them to take effect. :::
Settings
| Setting | Acceptable Values | Default |
|---|---|---|
| rotary1_enabled | true, false |
false |
| rotary1_event_cw | InputEventChar |
(not defined) |
| rotary1_event_ccw | InputEventChar |
(not defined) |
| rotary1_event_press | InputEventChar |
(not defined) |
| rotary1_pin_a | integer |
(not defined) |
| rotary1_pin_b | integer |
(not defined) |
| rotary1_pin_press | integer |
(not defined) |
rotary1_enabled
Enable the rotary encoder #1
Enable/Disable rotary1
<Tabs groupId="settings" defaultValue="cli" values={[ {label: 'CLI', value: 'cli'}, {label: 'Android', value: 'android'}, {label: 'iOS', value: 'iOS'}, {label: 'Web', value: 'web'}, ]}>
meshtastic --set rotary1_enabled true
meshtastic --set rotary1_enabled true
rotary1_event_cw
Generate input event on CW of this kind.
:::tip
For using with CannedMessageModule you must choose value KEY_UP here.
:::
Specify rotary1 event cw
<Tabs groupId="settings" defaultValue="cli" values={[ {label: 'CLI', value: 'cli'}, {label: 'Android', value: 'android'}, {label: 'iOS', value: 'iOS'}, {label: 'Web', value: 'web'}, ]}>
meshtastic --set rotary1_event_press KEY_UP
meshtastic --set rotary1_event_press ""
rotary1_event_ccw
Generate input event on CCW of this kind.
:::tip
For using with CannedMessageModule you must choose value KEY_DOWN here.
:::
Specify rotary1 event ccw
<Tabs groupId="settings" defaultValue="cli" values={[ {label: 'CLI', value: 'cli'}, {label: 'Android', value: 'android'}, {label: 'iOS', value: 'iOS'}, {label: 'Web', value: 'web'}, ]}>
meshtastic --set rotary1_event_ccw KEY_DOWN
meshtastic --set rotary1_event_ccw ""
rotary1_event_press
Generate input event on Press of this kind.
:::tip
For using with CannedMessageModule you must choose value KEY_SELECT here.
:::
Specify rotary1 event press
<Tabs groupId="settings" defaultValue="cli" values={[ {label: 'CLI', value: 'cli'}, {label: 'Android', value: 'android'}, {label: 'iOS', value: 'iOS'}, {label: 'Web', value: 'web'}, ]}>
meshtastic --set rotary1_event_press KEY_SELECT
meshtastic --set rotary1_event_press ""
rotary1_pin_a
GPIO pin for rotary encoder A port.
:::caution To prevent damaging your device, double check your device's schematics before attaching to the GPIO pins and setting this value. :::
Specify rotary1 pin a
<Tabs groupId="settings" defaultValue="cli" values={[ {label: 'CLI', value: 'cli'}, {label: 'Android', value: 'android'}, {label: 'iOS', value: 'iOS'}, {label: 'Web', value: 'web'}, ]}>
:::note
Replace GPIO below with the GPIO number from hardware setup.
:::
meshtastic --set rotary1_pin_a GPIO
rotary1_pin_b
GPIO pin for rotary encoder B port.
:::caution To prevent damaging your device, double check your device's schematics before attaching to the GPIO pins and setting this value. :::
Specify rotary1 pin b
<Tabs groupId="settings" defaultValue="cli" values={[ {label: 'CLI', value: 'cli'}, {label: 'Android', value: 'android'}, {label: 'iOS', value: 'iOS'}, {label: 'Web', value: 'web'}, ]}>
:::note
Replace GPIO below with the GPIO number from hardware setup.
:::
meshtastic --set rotary1_pin_b GPIO
rotary1_pin_press
GPIO pin for rotary encoder Press port.
:::caution To prevent damaging your device, double check your device's schematics before attaching to the GPIO pins and setting this value. :::
Specify rotary1 pin press
<Tabs groupId="settings" defaultValue="cli" values={[ {label: 'CLI', value: 'cli'}, {label: 'Android', value: 'android'}, {label: 'iOS', value: 'iOS'}, {label: 'Web', value: 'web'}, ]}>
:::note
Replace GPIO below with the GPIO number from hardware setup.
:::
meshtastic --set rotary1_pin_press GPIO
Details
Configuring the rotary encoder module require attaching the compatible hardware.
Examples
Configure rotary encoder for Canned Message Module
<Tabs groupId="settings" defaultValue="cli" values={[ {label: 'CLI', value: 'cli'}, {label: 'Android', value: 'android'}, {label: 'iOS', value: 'iOS'}, {label: 'Web', value: 'web'}, ]}>
:::note
Replace each GPIO (x3) below with the GPIO numbers from hardware setup.
:::
meshtastic --set rotary1_pin_a GPIO
meshtastic --set rotary1_pin_b GPIO
meshtastic --set rotary1_pin_press GPIO
meshtastic --set rotary1_event_cw KEY_UP
meshtastic --set rotary1_event_ccw KEY_DOWN
meshtastic --set rotary1_event_press KEY_SELECT
meshtastic --set rotary1_enabled True